Micro Usb To Mini USb to Normal USB

[Lordareon]

I've already ordered the Mine Keyboard and the Adapter to later know that atrix uses a micro USB...
this is the adapter:
http://produto.mercadolivre.com.br/...-conversor-usb-a-fmea-para-mini-usb-macho-_JM
Sure it doesnt fit in atrix. but.. if i buy this?
http://produto.mercadolivre.com.br/...-para-micro-usb-motorola-moto-q11-cpmt018-_JM
and then convert micro to mini then mini to usb normal? would i be able to plug a keyboard? Thanks
or even buy this new one?
http://produto.mercadolivre.com.br/MLB-195555339-conversor-usb-femea-para-micro-usb-_JM

 

[dLo GSR]

I've already ordered the Mine Keyboard and the Adapter to later know that atrix uses a micro USB...
this is the adapter:
http://produto.mercadolivre.com.br/...-conversor-usb-a-fmea-para-mini-usb-macho-_JM
Sure it doesnt fit in atrix. but.. if i buy this?
http://produto.mercadolivre.com.br/...-para-micro-usb-motorola-moto-q11-cpmt018-_JM
and then convert micro to mini then mini to usb normal? would i be able to plug a keyboard? Thanks
or even buy this new one?
http://produto.mercadolivre.com.br/MLB-195555339-conversor-usb-femea-para-micro-usb-_JM

you will not be able to plug in a USB peripheral (mouse, keyboard) directly into the phone. it will not work.

you can, however, purchase a +5V powered USB hub (that plugs into the wall), and use that to plug into the phone and plug your KB/mouse into the hub, and it should work. you can find such hubs at www.dealextreme.com

to further answer your question, USB-___USB converters will work as long as the converters have all four lines hooked up. many converters are 'power-only' where only the power/ground lines are connected and the other two lines (data) are not.

 

[Lordareon]

So if i buy an ordinary pc hub that connects to power and the plug usb-to-microusb, it will work?

 

[Lordareon]

Well let it alone, ill buy a Bluetooth keyboard, will spare time and cables and converters ahahha

 

[Fountainhead931]

The Micro USB plug must be OTG (USB ON THE GO) or your phone won't recognize the peripheral. Also the advice given was correct, the phone USB port can't provide power to a peripheral device and so you must use a powered hub in between the phone and the peripheral device.
A USB OTG has pin 5 and pin 4 tied together in the Micro USB connector end to tell the phone to invoke OTG mode.

 

[elementaldragon]

Lordareon: yea... if you'd go the wired route, you'd need a powered USB hub, since the Atrix's micro-USB port doesn't work as a host port. It doesn't provide power to external devices.

 

[dLo GSR]

Lordareon: yea... if you'd go the wired route, you'd need a powered USB hub, since the Atrix's micro-USB port doesn't work as a host port. It doesn't provide power to external devices.

already been stated twice.