• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!
  • Fill out your device list and let everyone know which phones you have!    Edit Your Device Inventory

MiXplorer: Q&A and FAQ (User Manual)

Search This thread

rsngfrce

Senior Member
May 13, 2012
792
495
NorCal
Apps & Games
+1 on this. Couldn't find an answer to their question. Can the left swipe to open drawer be disabled?
Actually, that is right swipe from the edge, correct? Right/left swiping just moves between the tabs unless you have "swiping in first and last tabs" enabled, when right swiping in the first tan opens the bookmarks and left swiping in the last tab opens a new tab. I don't see a way of disabling the right swipe from edge opening the bookmarks.
 

IronTechmonkey

Recognized Contributor
Feb 12, 2013
7,883
11,398
The greatest issue I am currently having with MiX, which could certainly be due to misconfiguration or ignorance, is that if I start a lengthy file copy/cut/paste task and have it run in the background, at some point I will return to MiX and hit the task icon to bring the running task to the foreground, but instead that starts the same task running a second time, then I long press and have to firure out which task I need to abort and which I need to leave run. I have been ending up with partially copied folders in unexpected locations.

Any suggestions? The FAQ says, "Pending Copy tasks in the queue can be repeated to different destinations", I think I must be activating this instead of what I am intending to do.
I may not be understanding this properly (in which case a screenshot might help) but typically returning to the file operation status panel to view or cancel the operation would be done through the Android notification. That being said I have also accidentally invoked a duplicate tasks while browsing through queued tasks...

Pause..

Test...

Okay, so I tested this and there two things I see which are relatively new, within the last six months to a year. The task in the MiX UI says RUNNING in bold capital letters, and when tapped it restores the file operation panel. I was expecting it to duplicate the file operation as you described. Puzzled.
 

IronTechmonkey

Recognized Contributor
Feb 12, 2013
7,883
11,398
Can the 'bookmarks access hamburger button' be moved?

I've been using MiXplorer every day for years, and just realized that I would benefit from having it on the left. I use a large tablet and can't reach it with a 'right-hand-finger-stretch'.

Good question. As far as I know, there is no way to do that. Perhaps this becomes a feature request for a new setting to swap locations of main menu and drawer or drawer left/right If possible. Another option which may be less graceful but perhaps easier to achieve could be to put a drawer button in the bottom button bar where the user could place it at the right or the left edge.
 

sharkie405

Senior Member
Dec 22, 2008
2,759
1,877
Earth
Actually, that is right swipe from the edge, correct? Right/left swiping just moves between the tabs unless you have "swiping in first and last tabs" enabled, when right swiping in the first tan opens the bookmarks and left swiping in the last tab opens a new tab. I don't see a way of disabling the right swipe from edge opening the bookmarks.
Sweet! I Just noticed something. Right-swiping from left edge only slides out the bookmark menu if the swipe is in the vertical center of the screen. Top and bottom swipes actually go back a page.

Just in case anyone didn't know.
 

IronTechmonkey

Recognized Contributor
Feb 12, 2013
7,883
11,398
Sweet! I Just noticed something. Right-swiping from left edge only slides out the bookmark menu if the swipe is in the vertical center of the screen. Top and bottom swipes actually go back a page.

Just in case anyone didn't know.

For me this seems determined more by the nature of the swipe than the location of it but that when holding the phone naturally only one particular location works well. In other words if I swipe in a particular quick manner with a certain amount of initial contact before the swipe motion the drawer opens instead of scrolling to previous tab wherever the swipe is started high or low on the left edge. That being said when holding the phone naturally the only place where I can hit the sweet spot is down toward the bottom rather than as in your case toward the center.

Other factors which could complicate our perceptions of this are variations in display hardware & OS settings and the presence of any other side swiping or scrolling utilities such as LMT Launcher which may be competing for a few pixels at the edge of the screen. In any event it sounds like you found a combo where it all works.
 

evilvoice

Senior Member
May 4, 2008
923
569
Conyers GA
Screenshot_20210623-011851_MiXplorer.jpg
Is there a way for MiXplorer to autosize? I'm trying to use it as my sole file explorer, but when using Dex on my galaxy device, everything in MiXplorer is very large and hard to navigate.

I tested using 5.1.0 and 5.3.2 and both are sized properly, but I cant find anything in the newest version that allows me to change the size of anything (not even text size)
 
  • Like
Reactions: IronTechmonkey

rsngfrce

Senior Member
May 13, 2012
792
495
NorCal
Apps & Games
View attachment 5345493Is there a way for MiXplorer to autosize? I'm trying to use it as my sole file explorer, but when using Dex on my galaxy device, everything in MiXplorer is very large and hard to navigate.

I tested using 5.1.0 and 5.3.2 and both are sized properly, but I cant find anything in the newest version that allows me to change the size of anything (not even text size)
Just to be sure, you are aware you can change the text size by pinching in or out?
 

rsngfrce

Senior Member
May 13, 2012
792
495
NorCal
Apps & Games
For me this seems determined more by the nature of the swipe than the location of it but that when holding the phone naturally only one particular location works well. In other words if I swipe in a particular quick manner with a certain amount of initial contact before the swipe motion the drawer opens instead of scrolling to previous tab wherever the swipe is started high or low on the left edge. That being said when holding the phone naturally the only place where I can hit the sweet spot is down toward the bottom rather than as in your case toward the center.

Other factors which could complicate our perceptions of this are variations in display hardware & OS settings and the presence of any other side swiping or scrolling utilities such as LMT Launcher which may be competing for a few pixels at the edge of the screen. In any event it sounds like you found a combo where it all works.
For me this seems to be determined by whether I swipe from the edge of the screen or not. Due to the case on my phone, it requires a bit of effort to swipe from the edge of the screen.
 

rsngfrce

Senior Member
May 13, 2012
792
495
NorCal
Apps & Games
I may not be understanding this properly (in which case a screenshot might help) but typically returning to the file operation status panel to view or cancel the operation would be done through the Android notification. That being said I have also accidentally invoked a duplicate tasks while browsing through queued tasks...

Pause..

Test...

Okay, so I tested this and there two things I see which are relatively new, within the last six months to a year. The task in the MiX UI says RUNNING in bold capital letters, and when tapped it restores the file operation panel. I was expecting it to duplicate the file operation as you described. Puzzled.
Yes, I am aware, as you say, that the 'typical' method of returning a running operation from the background to the foreground is from the notification panel, but at times I forget that and click the task icon, with the expectation that it will do the same thing, but it starts executing the operation second time instead. This is why I say it is likely due to misuse on my part, though I don't find this intuitive.
 

IronTechmonkey

Recognized Contributor
Feb 12, 2013
7,883
11,398
Yes, I am aware, as you say, that the 'typical' method of returning a running operation from the background to the foreground is from the notification panel, but at times I forget that and click the task icon, with the expectation that it will do the same thing, but it starts executing the operation second time instead. This is why I say it is likely due to misuse on my part, though I don't find this intuitive.

Thanks for the additional clarification. I jumped in fully expecting what happened to you but then was returned to the running task so now I'm wondering if it might be possible in your case that two instances of the task we're in the queue. In any event I'll pay closer attention do this during file operations.
 

evilvoice

Senior Member
May 4, 2008
923
569
Conyers GA
Just to be sure, you are aware you can change the text size by pinching in or out?
I'm going to assume you missed that I mentioned Dex. Dex is a Desktop Experience for Galaxy main line phones that lays everything out like Windows OS. So, with that understanding, how do I pinch in or out on my monitor?

While I think the above sounds like I am trying to be smart, a smartass, or an ass...I assure you Im not trying to come across that way, just trying to explain the situation...again, Mix 5.1.0 works fine, but the reason I'd like to have the latest work the same way is because:
1. It is the latest, which means fixes have been implemented. I don't know what I will come across with 5.1.0 that possibly could erase my sd card for whatever reason...not saying I expect it to, but I've seen other apps push a hotfix out because of something like this.
2. I really don't want to run 2 of the same app (or 4 if we bring in secure folder in to this, though technically it is still 2, but it is a second instance of both apps)
3. Things aren't really being created for 5.1.0 anymore. I tried to take the skin from the latest, which is AshesAll, and apply it to 5.1.0. While it mostly worked, some things were whited out that you couldn't really tell what it says or where to click. I don't even know if the addons are compatible with 5.1.0 anymore, or if I will have to install older versions of that to work with 5.1.0.

I use Dex A LOT. I'd say more than 8 hours a day. If it was just something I used off and on, I really wouldn't have asked because it wouldn't be a big deal to me. I still use MiX within Dex, but it is more difficult than it should be.

Hope this explains for anyone else as well.
 

IronTechmonkey

Recognized Contributor
Feb 12, 2013
7,883
11,398
smart, a smartass, or an ass...

LOL, it's nice to have options but I'm not calling you any of them, merely appreciating the humor. :D
For what it's worth it was not obvious to me what the entirety of your setup was either and I might have recommended something similar... if I understood what was going on at all.

Is this a matter of a possible feature request for something the developer does not yet know about or a workaround for a known and set limitation? Either way it might help to ask in the main thread as well.
 

rsngfrce

Senior Member
May 13, 2012
792
495
NorCal
Apps & Games
I'm going to assume you missed that I mentioned Dex. Dex is a Desktop Experience for Galaxy main line phones that lays everything out like Windows OS. So, with that understanding, how do I pinch in or out on my monitor?

While I think the above sounds like I am trying to be smart, a smartass, or an ass...I assure you Im not trying to come across that way, just trying to explain the situation...again, Mix 5.1.0 works fine, but the reason I'd like to have the latest work the same way is because:
1. It is the latest, which means fixes have been implemented. I don't know what I will come across with 5.1.0 that possibly could erase my sd card for whatever reason...not saying I expect it to, but I've seen other apps push a hotfix out because of something like this.
2. I really don't want to run 2 of the same app (or 4 if we bring in secure folder in to this, though technically it is still 2, but it is a second instance of both apps)
3. Things aren't really being created for 5.1.0 anymore. I tried to take the skin from the latest, which is AshesAll, and apply it to 5.1.0. While it mostly worked, some things were whited out that you couldn't really tell what it says or where to click. I don't even know if the addons are compatible with 5.1.0 anymore, or if I will have to install older versions of that to work with 5.1.0.

I use Dex A LOT. I'd say more than 8 hours a day. If it was just something I used off and on, I really wouldn't have asked because it wouldn't be a big deal to me. I still use MiX within Dex, but it is more difficult than it should be.

Hope this explains for anyone else as well.
You assume correctly and though I use a Galaxy phone myself, I have no familiarity with Dex itself in any event. I will be more cautious about attempting to help someone in the future to avoid such misunderstandings.
 

rsngfrce

Senior Member
May 13, 2012
792
495
NorCal
Apps & Games
I read the FAQ and would like to be sure that I understand correctly how the Undo function works. Is it correct that items are kept in the recycle folder untill the next time I delete something, at which time the prior items are replaced by the new items?

This sounds very useful, as I don't really have enough space to use the typical recycle bin that keeps items for a whole day (or whatever period) regardless of how many times you delete. I wish I had had this turned on, as I immediately knew I deleted something I had been working on for days yesterday and this would have saved me a lot of effort!

UPDATE: I can see from use that I was incorrect about how this works. Everything that I have deleted since I turned Undo on seems to still be in the recycle folder. I can't see no setting to determine how long the items are kept, so are they just kept until I empty the recycle folder? Not as useful as I had thought, since I am deleting to clear up space and I'm just wanting a very temporary fail-safe.
 
Last edited:
  • Like
Reactions: IronTechmonkey

DiamondJohn

Recognized Contributor
Aug 31, 2013
5,369
5,057
Sydney
Is there any option to make "copy" act like "move", in that they would disappear after being used once? I often copy many individual files in separate steps, and my list gets full and I start to loose confidence of where/which file I am copying (and have to log press to confirm/check). On a side, sometimes I copy a file to one place and then mopve it to another, but the copt task (on a file that no longer exists) remains. I understand the benefits of the copy remaining, and thats why i asked if there was an option.
 

IronTechmonkey

Recognized Contributor
Feb 12, 2013
7,883
11,398
I read the FAQ and would like to be sure that I understand correctly how the Undo function works. Is it correct that items are kept in the recycle folder untill the next time I delete something, at which time the prior items are replaced by the new items?

This sounds very useful, as I don't really have enough space to use the typical recycle bin that keeps items for a whole day (or whatever period) regardless of how many times you delete. I wish I had had this turned on, as I immediately knew I deleted something I had been working on for days yesterday and this would have saved me a lot of effort!

UPDATE: I can see from use that I was incorrect about how this works. Everything that I have deleted since I turned Undo on seems to still be in the recycle folder. I can't see no setting to determine how long the items are kept, so are they just kept until I empty the recycle folder? Not as useful as I had thought, since I am deleting to clear up space and I'm just wanting a very temporary fail-safe.

IIRC there is no automatic purging of the recycle folder, and I don't know what determines its maximum size but that's a good question, perhaps worth asking in the main thread. You can empty it or remove individual items via the menu or delete the material directly from the recycle folder. Now a hazy memory of a past discussion returns, I would have been one to make a case against automatically purging the recycle bin (except when device went out of space) but perhaps autotask could be used to delete the content of the recycle folder on a schedule of your choosing.
 
Last edited:

IronTechmonkey

Recognized Contributor
Feb 12, 2013
7,883
11,398
Is there any option to make "copy" act like "move", in that they would disappear after being used once? I often copy many individual files in separate steps, and my list gets full and I start to loose confidence of where/which file I am copying (and have to log press to confirm/check). On a side, sometimes I copy a file to one place and then mopve it to another, but the copt task (on a file that no longer exists) remains. I understand the benefits of the copy remaining, and thats why i asked if there was an option.

AFAIK the only way to remove a copy task immediately after first use would be to manually open the task list and tap on X in the task icon to remove it or wait 30 seconds until it times out, but neither of those address your usage case. I would be + 1 for a setting toggle the 30-second wait on or off or 30/5 seconds.
 

DiamondJohn

Recognized Contributor
Aug 31, 2013
5,369
5,057
Sydney
AFAIK the only way to remove a copy task immediately after first use would be to manually open the task list and tap on X in the task icon to remove it or wait 30 seconds until it times out, but neither of those address your usage case. I would be + 1 for a setting toggle the 30-second wait on or off or 30/5 seconds.
Theres a clear all at the bottom, but it's an extra step that I was hoping to avoid. Thanks for thinking about it. Maybe I should make a suggestion on the main thread.
 
Last edited:

Top Liked Posts

  • 3
    I hope I'm posting this in the right place. 🤞🏻

    Samsung Note 20 Ultra
    ONEUI 3.1
    Android 11

    Lately I'm getting a horrible transfer speed when moving any file above 1GB from my phones storage to my SD card since getting my Note 20 U. When I used my Note 8 the transfer, regardless of file size, was always fast. As I'm typing this Im moving a 7GB mkv file and I'm only getting 10MB/s!!!! Can anyone tell me what's going on and why this is happening? Please? I emailed MiXplorer support and was straight up told that he was "too busy to explain to me" what the issue is. Something about Android 11???? I'm not even sure how I would even search Google for that!

    Regarding the developer's reply, please keep in mind that they are sometimes away from the thread for a while so we might assume that during those periods they cannot engage too much. Don't take it personally. This FAQ is a good place to post such a thing which isn't perceived as a bug or an issue by the developer but might possibly be optimized with suggestions from other users.

    10MB/second is actually a fairly fast speed which many people only dream of having. How fast does the other device which seems to be better transfer the files?

    I've seen slow speeds when copying many small files especially if they are image files but that is the difference between 5 to 10 MB/s (real world maximum for the network which is always less than Network's technical specifications might indicate) and 100-250KB/s but you are not dealing with small files so that should not apply to you. As to large files, the amount of available memory can also slow down transfer speeds, and to the point the developer made there are restrictions in Android 11 which make these things more difficult.

    If you could share more side-by-side details about the comparison of transfer speeds between the two devices and more detail about the device specifications and the ROM variants then maybe people could provide some helpful advice.
    1
    I hope I'm posting this in the right place. 🤞🏻

    Samsung Note 20 Ultra
    ONEUI 3.1
    Android 11

    Lately I'm getting a horrible transfer speed when moving any file above 1GB from my phones storage to my SD card since getting my Note 20 U. When I used my Note 8 the transfer, regardless of file size, was always fast. As I'm typing this Im moving a 7GB mkv file and I'm only getting 10MB/s!!!! Can anyone tell me what's going on and why this is happening? Please? I emailed MiXplorer support and was straight up told that he was "too busy to explain to me" what the issue is. Something about Android 11???? I'm not even sure how I would even search Google for that!
    So, if you move a 6GB file you are getting over 10MB/s?

    That number sounds really suspicious as around the number I get with USB2 as opposed to USB3... But I understand, its not over USB ;)
    1
    I hope I'm posting this in the right place. 🤞🏻

    Samsung Note 20 Ultra
    ONEUI 3.1
    Android 11

    Lately I'm getting a horrible transfer speed when moving any file above 1GB from my phones storage to my SD card since getting my Note 20 U. When I used my Note 8 the transfer, regardless of file size, was always fast. As I'm typing this Im moving a 7GB mkv file and I'm only getting 10MB/s!!!! Can anyone tell me what's going on and why this is happening? Please? I emailed MiXplorer support and was straight up told that he was "too busy to explain to me" what the issue is. Something about Android 11???? I'm not even sure how I would even search Google for that!
    What speed do you get with the stock file manager?
    What about copying from a command line? (you can use "time cp" to get the time)
  • 6
    I have set text files to open by default with the Text Editor built into Mixplorer but it doesn't seem to work. As everytime it first asks the file type and then which app to open it with. What am I doing wrong?
    Edit: "Remember" option is ticked. The file doesn't have an extension. Its the "uevent" file. In Solid Explorer however it opens in a single tap. For normal text files no issues in Mixplorer.

    I can replicate this by creating a text file and removing the extension. Even if the text editor is set as default, MiX asks with the "open as" menu, which in principle seems correct behaviour.

    I know other text editors / file managers will open files without extensions as text directly, but I would argue this is a design decision by MiX rather than a bug. Maybe request it as a feature in the main thread.
    4
    I continually find myself long clicking a folder that I want to open in a new tab before remembering that doesn't work, I obviously picked up this behavior somewhere...

    Long press to open in new tab is default behavior for bookmarks. Maybe that's where you picked it up.
    4
    I have set text files to open by default with the Text Editor built into Mixplorer but it doesn't seem to work. As everytime it first asks the file type and then which app to open it with. What am I doing wrong?
    Edit: "Remember" option is ticked. The file doesn't have an extension. Its the "uevent" file. In Solid Explorer however it opens in a single tap. For normal text files no issues in Mixplorer.
    4
    Is the copy to/move to feature not useful to you?
    I haven't used/tried it for a while, so I looked at it again, but unfortunately, it does not work with my process.

    I commonly copy a number of files from numerous locations, cut a few files from others, and then paste them in one go into an SMB2 share on my PC; possibly multiple l;ocations. To confuse the matter further, as part of the bulk process, I need to copy one file from one location to another (on the device) and then cut that file from the new device location and paste (ie move) it onto the share. I basically collect 10-20 files from my device (some copy and some cut) and then paste them onto my share; sometimes at different locations. The copy to forces me to do one at a time,and although I didnt look to hard, it presented a cut-down explorer for the destination. I copy/move files across up to 5 tabs. The problem is that the copy's remain but the cuts disappear, so I can accidentally loose track of what I have done and what is outstanding to do.
    4
    Can you add folderSync feature in mixplorer?

    Specially windows to android and android to windows

    Folder Sync is necessary nowadays.
    If this feature is in this app, then we do not need another app.

    I use FolderSync for folder sync, is perfect and complete, nothing is better than a dedicated solution.
    But more important (at least to me;)) is having feature bloat, or derailing dev on features I would not use.
  • 94
    MiXplorer: Q&A and FAQ (User Manual)

    Table Of Contents:

    i. INTRODUCTION, GETTING MIXPLORER, & INSTALLATION (This post)
    ii. UI, NAVIGATION, VIEW CONFIGURATION, BOOKMARKS, TABS
    iii. WORKING WITH FILES & FOLDERS (Copy Move methods, Trash option)
    iv. FTP, HTTP, TCP SERVERS
    v. MiX NUGGETS (Freestanding Topical Posts)
    vi. THEMES and SKINS
    vii. BUG REPORTING, TROUBLESHOOTING, AND FAQ WIP

    Note: If you are just starting with MiXplorer then a general review of this FAQ might be helpful but if you seek information about a particular feature you can see if there is a "MiX Nugget" for it. MiX Nuggets are individual freestanding FAQ posts which describe a MiXplorer feature in enough detail for basic use without having to sift through whole FAQ. v. MiX NUGGETS (Freestanding Topical Posts).

    --------------------------------------
    i) INTRODUCTION

    As mentioned in an introduction from the main thread: "MiXplorer (Mix of Explorers) is a fast, smooth, beautiful, reliable and fully-featured file manager with a simple and intuitive user interface." created by XDA member and Recognized Developer @HootanParsa

    I (IronTechmonkey) am a MiXplorer user and tester who volunteered (was volunteered) to create the FAQ but I am not the/a developer.

    This FAQ attempts to describe configuration options, file & folder operations, UI options, and utilities, as well as to share workarounds for known issues or usage cases. Please feel free to provide, suggestions, corrections, or additions which could be linked to or added to the OPs. Thanks to all for your input already as much of this comes from your questions and answers in the main MiXplorer thread. Thanks to @HootanParsa for such a good file management utility.

    Please continue to direct bug reporting and tech discussion to the primary MiXplorer thread: http://forum.xda-developers.com/showthread.php?t=1523691.

    SOME MIXPLORER HISTORY (MiXtory?)

    This post by HootanParsa describes a how MiXplorer got started and some key events during its relationship with Google Play Store. https://forum.xda-developers.com/t/...y-featured-file-manager.1523691/post-77894840

    Here is another note from HootanParsa regarding the history of MiXplorer on Playstore https://forum.xda-developers.com/showthread.php?t=1523691&p=73870110.

    MiXplorer is closed source, and because the developer rarely if ever engages in discussions about closed vs. open source this is not discussed at length in the main MiX thread. This is not by any rule but rather by respect for the developer's decision. That being said, past discussions about closed vs. open source have been well informed and informative. Such discussions really do relate to software development, if not to the bugs to be fixed at any given moment, so please feel free to have such discussions here if/when they become too much for the main thread.

    --------------------------------------
    GETTING MIXPLORER

    There are several ways to get MiXplorer and keep it updated, each of which may appeal to different usage cases. Also note: The Playstore-Silver and XDA-Stable versions of MiXplorer are essentially the same (sometimes with small variation) but the Playstore-Silver version includes some add-ons (describe below and at Playstore page) which would have to be installed separately and manually in the XDA version.

    The Playstore_Silver version is also a way to contribute to MiXplorer development.

    As to upgrade paths: The Play Store gives a one-shot installation and upgrade path for the app and its included add-ons. The XDA stable version allows users to decide specifically which add-ons are installed but offers a similarly simple upgrade path from with the app.

    1) Main Thread: https://forum.xda-developers.com/showthread.php?t=1523691
    This is the best place to start for people who want the latest stable version, which is usually available in post 2. This is also where you can get the latest beta version. Note: it is always a good idea to check the main thread's OPs to see what version # is flagged as stable, as well as check the change-log.

    2) XDA Labs. It might still be possible to use the XDA labs site in web browsers but no longer the XDA Labs app to download MiX. The MiXplorer version may not be exactly the same as latest "stable" in MiXplorer thread but this is a "stable" update track.

    3) APK Mirror: This is a repository of more versions of MiX than most people would need, but some of these builds may be helpful in some situations and it provides access outside of Playstore.
    MiX at APK Mirror: https://www.apkmirror.com/uploads/?q=pishrodevs.

    4) APKMirror RSS Feeds: https://www.apkmirror.com/apk/pishrodevs/mixplorer-hootanparsa/feed/
    [inactive?]http://www.apkmirror.com/apk/hootanparsa/feed/ The ApkMirror RSS feeds are considered by many to be a similarly "stable" and up to date as the main MiXplorer thread and XDA Labs but it offers less information about the development progression of recent updates.

    5) Playstore (MiXplorer Silver). As announced by HootanParsa here https://forum.xda-developers.com/showpost.php?p=78465999&postcount=27232; "MiX Silver a bundle of MiX with Archive and SMB2 addons and the latest language resources is uploaded in Play store as a paid app to support the development of MiXplorer. If you liked it and installed it and found a problem, please let me know. Thank you very much. "

    Add-ons: MiXplorer Add-ons can be installed from within the app like this:
    Settings > Addons > and click add button > follow links to browse and download appropriate add-ons.

    MiXplorer Add-ons are also available through the XDA Labs Android app (search for MiXplorer) or through the XDA Labs Store browser pages for the MiXplorer app and Developer Hootan Parsa
    https://labs.xda-developers.com/store/app/com.mixplorer
    https://labs.xda-developers.com/store/author/HootanParsa
    Note: these links may no longer work.

    --------------------------------------
    INSTALLATION:

    After installing MiXplorer there are some things that must be done in order to give MiXplorer proper access to storage locations and root or SU access. It is a good idea to get these things out of the way as part of the installation (or update) of MiXplorer rather than on-the-fly as you need to perform file management tasks. Here is a brief walk-through of how to give MiXplorer it's requisite permissions. This is written for Android Nougat which has more of these prerequisites than earlier Android versions so please note that things may differ across different ROMs and SU/root methods:

    Do this stuff first, immediately after installing MiXplorer but before configuring it and importing skins and or settings

    - At first run of MiXplorer at prompt "Allow MiXplorer to access photos, media, and files on your device?" Select to Allow.
    - Make sure root is enabled in MiX setting > Navigate to Root "/" to force first time SU permissions request > Select " allow" and "remember".
    - Navigate to external SD and create a new folder. There should a prompt "Attention Please select Ext SD... to gain permissions". Note: In some situations you may not have to create a folder to invoke this prompt.

    BUG REPORTING

    - Please report bugs in the primary MiXplorer thread here: http://forum.xda-developers.com/showthread.php?t=1523691. Bug reports should include. details about your device (Android version, ROM version, Root status, SU method, MiXplorer version) as well as a step by step description of how to reproduce the issue and a log taken while the issue was reproduced. There are more suggestions for testing, logging and reporting bugs in this post: https://forum.xda-developers.com/showpost.php?p=65157367&postcount=7
    43
    ii. UI, NAVIGATION, VIEW CONFIGURATION, BOOKMARKS, TABS

    1) Primary UI Components
    2) Navigation
    3) Drawer (Bookmarks/History)
    4) Tabs
    5) Views (file folder list)

    6) "Home" page - described in MiX Nugget - Home Page - https://forum.xda-developers.com/showpost.php?p=82781209&postcount=1168

    --------------------------------------
    1) Primary UI Components

    The names of these UI objects may be referenced throughout documentation and are helpful to know when configuring themes (although they comprise only a small cross section of customize-able objects). Here are the names of a few primary UI components along with the specific name for their background colors in the theme configuration. To help them each item stand out a loud theme was used for the next few screen-shots, but the stock theme is used for the rest of the FAQ.

    A) Status Bar: TINT_STATUS_BAR
    B ) Main Bar: BG_BAR_MAIN
    C) Tab Bar: BG_BAR_TAB
    D) Tab Indicator: TINT_TAB_INDICATOR
    E) Selected Tab: TINT_TAB_INDICATOR_SELECTED
    F) Page: BG_PAGE
    G) Tools bar: BG_BAR_TOOLS
    H) Navigation Bar: TINT_NAVIGATION_BAR

    00020_Main_POP.png


    I) Action Bar: BG_BAR_ACTION The Action Bar appears in place of the Main Bar when one or more items is selected.
    00040_Action_POP.png


    J) Drawer: The Drawer can be opened by tapping Hamburger in Main Bar or swiping the Page from left edge toward right and takes it’s background color from BG_BAR_MAIN.
    00060_Drawer_POP.png


    --------------------------------------
    2) Navigation

    To navigate through folders; Tap the name of he folder you want to enter, or select a bookmark or history item. Note: Tapping the icon to the left will select and highlight the folder.

    To go to the previously accessed folder:; Press back button.

    To go anywhere in the path you are browsing: Tap the Location button in Main bar then tapping the part of the folder tree you want to go to.
    00080_Location.png

    To go to a manually entered location: Long press the Address in the Main bar then tap “Enter the path”. Note the other things that can be done from this menu: Copy path, Copy name, Enter the path, Create shortcut, Clear thumbnails cache, Properties. Note: The items in lists like this may change as MiXplorer evolves.
    00100_Location_Long_Press.png

    To search for items: Tap the search icon, then you can start typing what you want to find.
    To filter the search: tap the leaning-hamburger, then select an option.
    To search recursively (into sub-folders): Tap the right-angle arrow icon, then choose options and search criteria.
    Regex: Regex is a fairly powerful method of using expressions (wild-cards and variables) to do searches, and can also be used for renaming files.
    Harvesting information in this post https://forum.xda-developers.com/showpost.php?p=71218953&postcount=118

    00110_Search_Filter.png


    00120_Search_Recursive.png

    To change the View level of details: Tap the View button, then select an option.
    To Add a file or folder: Tap the Add button
    To refresh the View: Tap the Refresh button (or tap the Tab title, or tap the Location button in Main bar then tap the location).
    To sort the view: Tap the Sort button (A-Z icon)
    00140_View.png


    00160_Add.png


    00180_Refresh.png


    00200_Sort.png

    To show or hide an item flagged as hidden: With no items selected, tap overflow menu then tap "Show Hidden" or "Don't show hidden".
    To exit MiXplorer: Long-press Back button.

    ------------------------------------
    3) Bookmarks/History (Drawer)

    To open the Drawer for Bookmarks and History: Tap hamburger in Main Bar, or swipe from the left edge toward right.

    To create a Bookmark to a location on the device: Navigate to the location, then long press the Location in the Main (top) Bar, then tap "Add to...", then tap "Bookmarks"; or Navigate to one level above the folder, then long press the folder in the file/folder list, then tap overflow menu, then tap "Add to...", then tap "Bookmarks". :

    To create a Bookmark to a network share, server or cloud: Open Drawer, then tap hamburger, then tap Add storage, then select and configure the type of storage. There is a "Custom" option at the bottom of the list. Here are examples of 2 common types of network bookmarks:

    1) To access shared folder (SMB share) on PC or other computer on same local network.:
    - Have a shared folder on a computer with file sharing and network discovery enabled.
    - Open MiXplorer on device connected to same network.
    - Bookmarks Drawer
    - Hamburger button
    - Add Storage
    - Custom
    - Search local
    - Enter credentials
    - If the search finds no shares there may be an issue with the sharing on the host or network between devices but you could try manual configuration.

    2) To access an FTP Server on another device:.
    - Have an FTP server to connect to.
    - Bookmarks Drawer
    - Hamburger button
    - Add Storage
    - Custom
    - Enter server details (ftp://<ipaddress>:<port>, user-name password)

    Notes about network and cloud bookmarks:

    - When you create a connection to local network share or cloud via <Bookmark Drawer - hamburger - Add storage>, a Bookmark will automatically be created.

    - Depending on the type of network location, when you browse the network location you may or may not be able to create bookmarks to locations within that tree as described above. This should work for SMB shares on a computer or folders on another Android device accessed via MiXplorer FTP and might work for others.

    - When you save an off-device bookmark, some context sensitive additional configuration variables may or may not be added to the "Advance settings" field, which in some cases can be edited manually later.

    To Delete or modify a bookmark: Open the Drawer, then swipe the bookmark name to the right, then select appropriate action.

    To rearrange bookmarks: Open the Drawer, then tap and drag a bookmark by it’s icon up or down.

    00260_Bookmark_Delete.png


    00280_Bookmark_Reorder.png


    To create a custom category (similar to custom bookmark for a search) in the bookmark list: Open 'All files' - Tap on the search button - Recursively - Enter file-name extensions eg; *.zip|*.rar|*.txt - Press GO - Long press the address bar - Add to bookmarks.

    To reset the search-all-by=type folders (archive, apk,image, video, etc) if they are gray and don't work: If you are updating from an older version of MiXplorer you may have to click on bookmark menu and choose "reset default" (which should preserve your own bookmarks) to recreate the new versions of the search bookmarks, then you can delete the gray ones.

    Bookmark functions via the Bookmarks Menu: Add storage Reset defaults; Remove all, Export. Note: To import bookmarks, open the exported .micfg file with MiXplorer and select import.
    00300_Bookmark_Menu.png


    To switch between Bookmarks and History : Open Drawer then tap the Bookmarks or History label in top Bar.

    To clear history: Open Drawer to History, then tap mini-hamburger.
    00320_History.png

    --------------------------------------
    4) Tabs

    1st Tab is left-most. Last Tab is right-most. New tabs will open to the right of the active tab.

    General Tab functions: These actions can be accessed via the tab menu and are context sensitive, based on Tab bar visibility and tab arrangement.
    With Tab Bar
    00340_Tab_Menu_General.png


    Without tab bar
    00360_Tab_Menu_General_Hidden.png

    Individual Tab functions: These functions can can be accessed by long pressing on a Tab when the Tab Bar is visible.
    00380_Tab_Menu_Individual.png

    To refresh a Tab’s view: Swipe down, or tap on the name in the Tab Bar, or tap the location name in main bar then tap it again in the drop down.

    To open a new tab:
    - Open Bookmarks/History
    - Long press on the item that you want to open in a new tab
    or
    - Select a folder in the main page
    - Tap the overflow menu in the action bar
    - Tap "Open in new tab",
    or;
    - Tap the Tab menu then tap "Add new tab"
    or;
    - When on last (right-most) tab, Swipe from right edge to left (depends on "Settings" - ""More Settings" - "Swiping in first and last...")


    Save single tabs or a group of tabs (Note: "Save" may occasionally be referred to as "Pin")

    To save an individual Tab be opened to a specific location at each app start
    - Have only one tab opened.
    - Navigate to desired location.
    - Long press on Tab Title then tap "Set as default".
    - Open the Tab drop-down menu, select, "Save tabs", Tap "Now" (leave "On Exit" un-selected).

    To save a group of tabs (tab-set) to be opened at each app start:
    - Create the tabs, and open each to the location of your choice.
    - To set the default tab (to be active at app start) long press on Tab Title then tap "Set as default".
    - Open the Tab drop-down menu, select, "Save tabs", Tap "Now" (leave "On Exit" un-selected).
    Note: View detail level and sort order should be remembered per tab.

    To have MiXplorer save the tab-set that is in place at each app close (to be opened at next app app start):
    - Open the Tab menu.
    - Select check box: "On Exit".

    To reset tabs to whatever was last saved by 'Save tabs - Now" or by "Save tabs - On exit":
    - Open the Tab menu then tap Reset tabs. Each Tab's view level and sort order should be remembered and not be reset by this action.


    5) Views (file folder list)

    There are many ways to configure the file/folder list views using the "View" and "Sort" buttons which appear in the Tools bar at the bottom (in the default skin and configuration). Here are a few of the more notable functions:

    - "View" button - "Recursive data": When "Recursive data" is enabled (and after a refresh of the view) MiXplorer will calculate and show the quantity of items and storage space uses in sub-folders.

    - "View" button - "Reset defaults": When "Reset defaults" is enabled then pinch zoom settings can be reset to default for each drive independently by going to root of drive, then selecting a view mode (eg "Detailed"). To maintain the different zoom levels disable "Reset defaults".

    - "Pin" an item to top of list: A folder or file can be "Pinned" so it stays at the top of the list view regardless of sort options. To pin/unpin an item: Select it then open menu then select pin/unpin. Similarly, apps in the "Open with" list can be pinned to the top of that list by long pressing the app then tapping "Pin"

    - Create a custom thumbnail: To create a custom thumbnail for a folder (which would be used when "Auto folder preview" is enabled in main settings) put the image you want to use for the thumbnail in the folder and rename it to .preview.

    - Gallery style view for search folders: For the search folders which show all of a certain file type (eg Audio, Document, Image, Video), there is a gallery style view which shows all images of the designated type on the device but grouped in folders by location similar to the way most default gallery apps work. To enable this mode: Tap the "Sort" button then enable "By parent". To show all items in one list without the folders, disable "By parent"

    - App, User App, System App: When viewing contents of the "App" search bookmark, tapping on Location allows choice of App (all), User App, System App. To create a custom bookmark to any of those: Tap the Location in Main Bar, then select desired view (App, User App, or System App) then long press location and "Add to" bookmarks.

    6) "Home" page

    A full page panel containing locations with details, described in more detail here: MiX Nugget - Home Page - https://forum.xda-developers.com/showpost.php?p=82781209&postcount=1168


    ----------------------------------------------
    ----------------------------------------------
    LINKS TO FAQ SECTIONS
    i. INTRODUCTION, GETTING MIXPLORER, & INSTALLATION
    ii. UI, NAVIGATION, VIEW CONFIGURATION, BOOKMARKS, TABS
    iii. WORKING WITH FILES & FOLDERS
    iv. FTP, HTTP, TCP SERVERS
    v. PLUG-INS & SETTINGS
    vi. THEMES and SKINS
    vii. BUG REPORTING, TROUBLESHOOTING, AND FAQ WIP
    37
    iii. WORKING WITH FILES & FOLDERS

    Search, searching for items: Expanded description of search methods in this post. MiX Nugget - Searching for Files and Folders: https://forum.xda-developers.com/showpost.php?p=82781351&postcount=1170

    Select a file or folder: Long press anywhere on the file, or tap on the icon at the left side.

    Select multiple files and or folders: Select one file or folder as described above and then select additional items by tapping on the name of each item.

    Select all files and folders in the current view: Tap the "Select all" button in the tools bar, or open overflow menu and tap Select all. Note: the Select all button and the Servers button can be swapped in the Tools Bar via Settings - More Settings.

    Once you have selected any item(s) the Action Bar will appear (temporally replacing the Main Bar) and will show a counter of selected items with their size, and icons for some standard actions with an overflow menu for more actions. The downward pointing arrow now offers options to expand shift or invert the selection.
    00400_Selected.png


    There are several ways to to Copy or Move items:

    Task queue Select items, then choose an action (repeat process for multiple jobs), then navigate to destination, then tap Job Queue, then select queued task.
    00420_Task_Queue.png


    - Individual pending tasks or all pending tasks can be cleared from the queue.

    - Pending Copy tasks in the queue can be repeated to different destinations.

    Drag & drop: Select some items then long press on that selection and drag. A hovering pop-up will appear indicating how many selected items are being dragged.When the the destination folder becomes highlighted, release the selection and respond to the then a “Drop files” prompt which offers a choice to copy or move the selected items.
    00460_Drag_Drop.png


    Copy To and Move To: To copy/move files to a folder to be selected during the process; select items, open menu, tap ]Copy To or Move To, navigate to location, tap OK.

    Some long file operations can be paused using the play/pause button in the task status window. Also, from there the task can be canceled or sent to background.
    00440_Task_Status.png



    Delete options. There are several delete methods, the visibility of which may be context sensitive, and MiXplorer has a native "recycle/trash" feature which can be enabled in Settings - More Settings - Undo.

    Normal: Deletes file “normally”. As is the case with file deletions (not Recycle or Trash) in other OS, the deletion is non-reversible but the raw data may persist until incidentally written over by other system activity.

    Trash: Similar to Recycle or Trash bins on desktops. The locations (drives/root paths) where “Trash” functions may very across ROMs and devices. When "Undo" is enabled as described above the following should occur:

    - Deleted items are placed in hidden folders named .recycle at the root of each drive. Don't delete those manually unless you are not using the "Undo" feature.

    - In the main menu there is an item called "Undo" which shows a list of available undo items. Long press on an item in that list to see the specific files that can be restored. Short press to restore that item/group of items.

    - Menu > Undo > "Remove all"; will delete all the .recycle folders and their contents from all drives (if they exist). Also nota bene: only do this if you are sure you wont need to restore anything). Any time you "Trash" something when "Undo" is enabled the .recycle folder for that drive will be recreated. If you've already disabled "Undo" in settings and still have leftover material in the .recycle folders, those folders can be deleted manually (requires "Show hidden")

    - In some cases you may be able to recover items manually from the .recycle folders.

    - If the trash cannot be emptied, try the following: Main Menu > Undo > Remove all, or Settings > More Settings > deselect Undo. As with manually deleting the contents of the trash/recycle folder, make sure you dont need anything from there before doing this.

    Shredder: Destroys files before deleting them. Only available for certain locations. May take longer for larger selections. Deletion by this method is non-reversible and leaves minimal if any recoverable data on the drive.

    Batch Delete: When you try to delete a folder as "Normal", it also takes time to clean up database, removing thumbnails, etc... . You can use "Batch Delete" to remove that folder as fast as possible.



    ----------------------------------------------
    ----------------------------------------------
    [LINKS TO FAQ SECTIONS
    i. INTRODUCTION, GETTING MIXPLORER, & INSTALLATION
    ii. UI, NAVIGATION, VIEW CONFIGURATION, BOOKMARKS, TABS
    iii. WORKING WITH FILES & FOLDERS
    iv. FTP, HTTP, TCP SERVERS
    v. PLUG-INS & SETTINGS
    vi. THEMES and SKINS
    vii. BUG REPORTING, TROUBLESHOOTING, AND FAQ WIP
    37
    - vii. BUG REPORTING, TROUBLESHOOTING, AND FAQ WIP

    ----------------------------------------------
    Bug Reporting:
    Please report bugs in the primary MiXplorer thread here: http://forum.xda-developers.com/showthread.php?t=1523691.

    Bug reports should come from the newest beta version of the app. If you notice a bug in the newest release version then check the newest beta. If it also occurs in the beta then log it from there.

    Bug reports should include. details about your device (Android version, ROM version, Root status, SU method, MiXplorer version) as well as a step by step description of how to reproduce the issue and a log taken while the issue was reproduced.

    ----------------------------------------------
    MiXplorer's Built-in Logging:


    Enable MiXplorer logging: Settings . More settings . Logging (enable)

    MiXplorer has a native logging feature. If logging is enabled (as it is by default) then the most efficient and the recommended way to do it is the following:

    - After crash or after experiencing issue,
    - Open MiXplorer
    - 3-dots menu
    - Send log.

    If you have disabled logging in the past, or you if are diagnosing more complicated issues or if you will be reviewing the logs yourself before sending. Here is a manual method that some people use:

    - Enable MiXplorer logging.
    - Close MiXplorer.
    - Open MiXplorer.
    - Reproduce the issue.
    - Close MiXplorer.
    - The logs should be in /storage/emulated/0/Android/data/com.mixplorer/cache/log/ (The path may vary slightly depending on ROM).
    - Use alternative file manager (just for this ;)) to get most recent log in folder.
    - If using MiXplorer to get the log manually, then make sure to get the log for the previous MiXplorer session rather than the one for the current session.

    Testing and Logging Notes:

    - Reproduce and log issues in a new session of MiXplorer that was started after logging has been enabled. In other words: Enable logging, then close MiXplorer, then start MiXplorer to reproduce the issue and send the log. A new log is created each time you open MiXplorer. Note: - In some cases it is recommended to test the issue in a clean installation of MiXplorer (after uninstalling MiX then reinstalling it).

    - The MiXplorer log directory will not appear until MiXplorer logging has been enabled at least once since last new installation of MiXplorer. Also, if MiXplorer is uninstalled the log folder will be deleted, so if you are getting logs manually during repeated tests remember to do so before next uninstall.

    - Before sharing logs it is a good practice to review them for information that you don’t want to share, and to delete that information or replace it with an obvious label, eg <thing x deleted>. To each their own about what to delete, but reviewing logs with privacy in mind before sending is prudent.

    - For logging more complex issues, or certain types of FCs where native app logging does not catch the error, a full system log (logcat) may be needed. The app "MatLog" (formerly "CatLog") from Play Store https://play.google.com/store/apps/details?id=com.pluscubed.matlog&hl=en can be used to capture logcats on the device. If an issue is causing reboots then the log might have to be taken from a USB connection on a computer via ADB.

    - When you share the log, also share the following:

    1) Full details of the device including: Android version, ROM version and variant, Root status, SU status, busybox status.
    2) A detailed description about how to reproduce the error when logging so others may try to reproduce it.


    ----------------------------------------------
    If you have trouble accessing SD cards locally or through FTP you can try different paths. Note: The effectiveness of these paths may vary by ROM and nature of permissions.

    /storage/sdcard0
    /storage/sdcard1
    /storage/emulated/0
    /mnt/shell/emulated/0
    /mnt/media_rw/sdcard1

    Similarly if you are having trouble accessing USB drives you can look in

    /storage/
    /mnt/media_rw/

    ----------------------------------------------
    Busybox (Toolbox, Toybox):

    - Here is a very nice description from @jcmm11 about history and general role and functionality of Toolbox, Busybox and Toybox: https://forum.xda-developers.com/showpost.php?p=74883586&postcount=22622.
    - In some situations, specific versions of Busybox may be required to use MiXplorer for root operations.
    - From within MiXplorer, when you are in a system location there should be a "Busybox" option in the main menu. If you are having trouble accessing the location, tap that "Busybox" item.
    - Installing a version of Busybox from Playstore or other source may also work.
    - Harvesting new information about Busybox in this post: https://forum.xda-developers.com/showpost.php?p=70713137&postcount=89

    ----------------------------------------------
    MiX Nuggets (This section is a work in progress)

    - Tabs
    --- Single
    --- Group
    --- Now or at app open

    - File Management
    -- Find Duplicate Files: https://forum.xda-developers.com/showpost.php?p=76395344&postcount=514



    - Automated Intents (Tasker etc)
    --- COPY with Tasker, Automagic and...: https://forum.xda-developers.com/showpost.php?p=75389465&postcount=422
    --- Turning Servers ON/OFF with Tasker and... :https://forum.xda-developers.com/showpost.php?p=75400602&postcount=424

    - Bookmarks to Network Locations
    --- SMB share on other device.
    --- FTP server on other device.
    --- Cloud

    - Servers
    --- FTP
    --- HTTP
    --- TCP: https://forum.xda-developers.com/showpost.php?p=75366970&postcount=421

    - Autotag: https://forum.xda-developers.com/showpost.php?p=75366938&postcount=420
    + placeholder will fill in later

    - - Settings
    - View, Sort,
    - Navigation
    - Search
    - Initial permissions
    - Export/import Settings
    - Custom search bookmark
    - Custom folder preview icon
    - Expanded description of "Button" menu configuration.
    - App backups
    - Archive management.
    - File/Folder details
    - "Allow Root" setting.
    - General Settings update.
    - Description of available plug-ins.
    - Alternate way to reset settings: Same as with with most apps - clear the cache and data.
    - Advanced search options and regex: Harvesting information in this post https://forum.xda-developers.com/showpost.php?p=71218953&postcount=118
    - Themes: How to create, backup, save, and share themes.
    - MiXplorer Media Viewer usage description:
    - MiXplorer Editor usage description:
    - Description of each customize-able item in skins.

    - -----------------------------------------------
    ----------------------------------------------
    LINKS TO FAQ SECTIONS
    i. INTRODUCTION, GETTING MIXPLORER, & INSTALLATION
    ii. UI, NAVIGATION, VIEW CONFIGURATION, BOOKMARKS, TABS
    iii. WORKING WITH FILES & FOLDERS
    iv. FTP, HTTP, TCP SERVERS
    v. PLUG-INS & SETTINGS
    vi. THEMES and SKINS
    vii. BUG REPORTING, TROUBLESHOOTING, AND FAQ WIP
    35
    iv. FTP, HTTP, TCP SERVERS

    There are a variety of ways MiXplorer can be used to access files on other devices or make files available to other devices. This post describes the 3 types of servers MiXplorer can use to make files available to other devices. FTP, HTTP & TCP Servers

    Each MiXplorer server type offers different functionality and each can be run a few different ways from buttons and menus within the MiXplorer UI or directly from the Android UI (widgets &quick-tiles). Note: A MiX server will use a different root location (folder seen as root by client) depending which settings are in place, and where the server was run from, and which folder/tab is active. See "Default path" section below for more detail.

    Server Settings In Common for MiXplorer FTP, HTTP and TCP servers. :

    - Default path: This is the directory which incoming clients will see as the root of the directory tree.

    -- When server is run from: Toolbar's Server button (hidden by default, enable in Settings > buttons); then root for incoming clients will be the location of the presently active tab in MiXplorer.
    .
    -- When server is run from: 3-Dot Menu > Servers; then root for incoming clients will be the root of currently active partition (drive). Not the presently viewed location but rather the root of the partition in which the presently viewed location resides).

    -- When server is run from: Widget or Quick-tiles; then root for incoming clients will be the location designated in the server settings panel.

    - Username: Self explanatory. The more unique the more secure.
    - Password: Self explanatory. The more unique the more secure.
    - Port: Assign a port manually or leave blank to use default port for given server type. Default for FTP is 2121. Default for HTTP is 8080. Default for HTTPS is 8181.
    - Secure (check-box): For HTTP and TCP servers, use secure protocol. For FTP use FTPS.
    - An internet connection is not required but the devices must be on same LAN, wifi network, or hotspot.
    - To stop server: "Servers" then "Stop FTP/HTTP/TCP Server" or expand notification then Stop FTP/HTTP/TCP server, or tap widget.
    - To Reset all servers (make sure you know your settings and have them backed up before doing this): Settings > More Settings > Reset Servers

    ------
    FTP Server:
    This is the most fully featured of the servers (not counting SMB shares). FTP Clients on other networked devices, including Android devices running MiXplorer can manage files with the full range of functions expected for FTP access. This might also work through a native file viewing window on OS that support it. To configure and access a MiXplorer FTP server:

    - On 1st device configure a MiXplorer FTP server. You can check the notification to verify IP Address and Port #.
    - On 2nd device configure your FTP client to access the MiXplorer FTP server with aforementioned IP address and Port#.
    - If using MiXplorer on 2nd device then, in MiXplorer create a bookmark to access the FTP server that is running on the 1st device. That bookmark is effectively an FTP client.
    - On 2nd device open your FTP client or your MiXplorer FTP bookmark.

    Additional information about FTP here: https://forum.xda-developers.com/showpost.php?p=71415130&postcount=152

    ------
    HTTP Server: Allows other devices on the same network to access files though web browsers. This eliminates the need for 3rd party “clients” but the interface is minimal, like a web page, navigating and downloading via hyperlinks.This might also work through a native file viewing window on OS that support it.

    - On 1st device configure MiX HTTP server.
    - On 2nd device use a web browser to access the address of the HTTP server that is running on the 1st device.
    - In browser on 2nd device download files (and upload?).

    ------
    TCP Server:
    Allows "Send to" directly from one device running MiXplorer to the another device running the MiXplorer TCP server on the same local network, with MiXplorer TCP server configured with same parameters on both devices.

    - Both devices connected to same Wifi network (can be done with hotspot).
    - MiXplorer TCP server configured with same parameters on both devices.
    - On destination device: Open tab to destination directory then run MiXplorer TCP server.
    - On source device: Select file(s) > 3 button menu > Send to ... > Refresh > select destination device.
    - The files should be copied to the directory that is opened on destination device.
    - You should see some simple toasts at some points into the process on both devices.

    ----------------------------------------------
    ----------------------------------------------
    LINKS TO FAQ SECTIONS
    i. INTRODUCTION, GETTING MIXPLORER, & INSTALLATION
    ii. UI, NAVIGATION, VIEW CONFIGURATION, BOOKMARKS, TABS
    iii. WORKING WITH FILES & FOLDERS
    iv. FTP, HTTP, TCP SERVERS
    v. PLUG-INS & SETTINGS
    vi. THEMES and SKINS
    vii. BUG REPORTING, TROUBLESHOOTING, AND FAQ WIP