Mk808 android 4.1 mini pc

Search This thread

brunek

Senior Member
Jan 3, 2013
441
51
Hi, I've downloaded the fin 1.7, but can't find any guides. Want to be very careful not to brick it. Also, did you open your device to determine which hardware revision you have? I'm running PPTP right now, but it is slow. I have Openvpn on another server that I want the MK to attach to but can't do that without TUN.KO. Any guides you used would be appreciated.

Thanks!

You have a guide inside the zip..

posl'o ja to s mob'tela
 

Jspex

Senior Member
Mar 2, 2012
448
197
Hi, I've downloaded the fin 1.7, but can't find any guides. Want to be very careful not to brick it. Also, did you open your device to determine which hardware revision you have? I'm running PPTP right now, but it is slow. I have Openvpn on another server that I want the MK to attach to but can't do that without TUN.KO. Any guides you used would be appreciated.

Thanks!

I've owned my mk808b for about 9 months and use it a lot. I personally suggest flashing the 1.6 version of finless. It has better compatibility with netflix and the xposed framework.

Also yes there is an instruction file included. YouTube also has a few videos on the subject that may help out as well.

Did you thank your Developer today?
 

Top Liked Posts

  • There are no posts matching your filters.
  • 3
    I run armtvtech. I've also been into these dual core android tv sticks since they first came out. I had the ug802 before it was released, and made the ICS play store fix for it. I've compiled custom kernels for the UG802, MK808, and MK802 III to support 1080p, xbox controllers, touchscreens and other options.
    So I've got some opinions on the different rockchip android devices available.

    MK808
    cons:
    -no signal on some hdtv's
    -65Mbps wifi maximum speed, wifi also tends to drop
    pros:
    -Can run the fastest out of all the rk3066 sticks I've tested.(custom kernel up to ~1500Mhz)
    -Good build quality
    -extra usb otg port
    -can run custom kernels

    MX1/MX2
    cons:
    -can only run at 1200Mhz max(no heatsink!)
    -no kernel source for the mediatek wifi
    -solder joints on the usb ports can be hit or miss
    pros:
    -built in bluetooth
    -wifi actually works at 150Mbps

    UG802(I have 3 of these left, gave away 2)
    cons:
    -wifi problems
    -4gb flash
    -1200mhz max(no heatsink)
    pros:
    -wifi can connect at 150mbps when it works
    -decent build quality
    -can run custom kernels

    MK802 III
    cons:
    -1200mhz max(no heatsink)
    pros:
    -wifi up to 150Mbps
    -decent build quality
    -can run custom kernels

    I actually own the above devices.
    Out of all of them the MK808 is the fastest, but has the slowest wifi and a nasty no signal bug.
    The MK802 III has great wifi while still being able to run custom kernels.
    The MX1/MX2 has really good wifi, but doesn't have any source code for the wifi so there won't be any custom kernels for a bit.




    Geekbuying has just released the MK808B. It's exactly the same as the MK808, but it now includes internal bluetooth!
    blog.geekbuying.com/index.php/2012/12/09/mk808-bluetooth-version-coming-review-root-firmware/
    They've got it for $56.99 which is a bit cheaper than the iMito sticks right now.
    It's a bit of a trade off 65mbps(MK808B) wifi vs 150mbps wifi(iMito)....except when you figure in that you can run custom kernels.
    Also it's unknown if the MK808B still has the no signal bug on some HDTVs.

    I hear good things about the Minix Neo G4 and the uHost2, but I don't have any of those to test yet.

    I'm currently testing an amazing new stick. The GK802.
    It's based on the freescale i.mx6q quad core soc.
    So far it has a couple of bugs, but it feels smoother than the rockchip sticks. It's brand new...so the bugs will get fixed.
    The wifi can go to 150mbps.
    The resolutions actually change when you select them.
    Android boots off a removable internal micro sd card. I made a dd image of my card before I even booted it up.
    The stock play store needed some xml files in order to have access to a lot of apps.
    Rooting was pretty simple
    Freescale supports linux with hardware acceleration, so I'm attempting to get it to boot. I just need to figure out the uboot settings.
    It's a nice stick for the money. I'm really enjoying the experience considering that I'm pretty tired of all the rockchip sticks.

    Another alternative stick that's coming out is the Droid Stick A2 from kimdecent. It looks like it's a re-badged ATV-120.
    It's got the amlogic AML8726-MX dual core processor. I'm mostly interested in it because that processor should be able to support XBMC hardware decoding.
    I've been trying to get a sample of the ATV-120 for months now.

    I'm sure that there will be some Allwinner dual/quad core sticks coming out within the next 6 months. This world in general is moving pretty quickly. There's rumors of a quad core rockchip soc coming out, and of course there's a rumor of a 4412 based stick coming out.

    Last and mostly least is the Cotton Candy....it's pretty much an overpriced flop. If they had been quicker to the market it would of been killer.
    The only thing it has going for it is the use android on your laptop/computer thing. That's pretty much a custom vnc client set to autorun and connect to the Cotton Candy via usb.
    I don't see why any of these other manufacturers can't make that work with their sticks and usb mass storage mode.
    I can't Cotton Candy recommend it to anyone.
    3
    Tip of the day: use 2A charger to minimize crashes. :)

    Original 1A: crashes time to time
    SGS3 1A: few crashes
    2A: no crashes anymore!
    2
    just one more note on this subject: the link is to the busiest Forum/sub-forum-folder I have seen, by far, on the subject of these MK808 & etc 'stick pc's' . i trust its ok to post it as I'm just trying to accumulate the knowledge base

    Sure, seems fine to me. Here is some info I am about to explore on adding the driver and configuring the needed files for touch screens to work with the MK802, MK808, UG802, etc. devices. That's all I'm trying to do. Once I get that working I'll post the steps and then give the detail needed for a Arduino integration via usb or bluetooth to obtain GPS and control an fm receiver. Wish me luck:

    Google Groups info on what to add and configure to make touch screens work:
    message me for the link (won't let me post yet... ridiculous)

    Android detail on the .idc file (input device configuration file):
    message me for the link (won't let me post yet... ridiculous)

    Hope this helps someone out...
    1
    http://www.amazon.com/Computer-Dual...UTF8&qid=1357749985&sr=8-1&keywords=mk808+iii
    this model is not expensive and has good reviews - the shadow of amazon can be useful if you have to replace one. though, caveat emptor

    its remarkable to me that, considering how long these mk808 ref/designs have been out there, nobody so far as I have seen has compiled a list of the different makes/makers and weighed in on the top 2 or so from a build-quality standpoint. there is a seller on ebay, in the USA [NC iirc] who claims to have sorted through the pile and at any rate offers a return [to/from NC] policy and charges a bit more for that service. the later imito mx1 units have Bluetooth support but suffer from wifi issues - I'm not sure as of today what the cure is for the wifi thing - some say its just bad build, and can be remedied, others blame firmware, chip-compatibility, sunspots, etc.
    if you poke around the specialized forums for the subject [like the one finless bob hangs out in] there's a lot of info to be had.

    I don't think you'll do well picking up a "cheap chinese tablet" on RK3066 platform that will fare as well as one of the MK808's of better quality. you'll have to pay up for one of the better tablets in the 150 USD range, and still keep fingers crossed