Yeah there is zero reason it shouldn't work on it. Sorry for the late reply works been killer
Sent from my Galaxy Nexus using Tapatalk 2
Sent from my Galaxy Nexus using Tapatalk 2
[MOD] 3 CDMA mods updated 7/11/12
- Thread starter motcher41
- Start date
-
- Tags
- development
nice
niceTE=motcher41;26824099]Yeah there is zero reason it shouldn't work on it. Sorry for the late reply works been killer
Sent from my Galaxy Nexus using Tapatalk 2[/QUOTE]
I already tried mod 1 and 2, my question is what value did u tried in mod 3?do anyone tried mod 3? Did it worked?what values did you put? TIA
niceTE=motcher41;26824099]Yeah there is zero reason it shouldn't work on it. Sorry for the late reply works been killer
Sent from my Galaxy Nexus using Tapatalk 2[/QUOTE]
I already tried mod 1 and 2, my question is what value did u tried in mod 3?do anyone tried mod 3? Did it worked?what values did you put? TIA
I already tried mod 1 and 2, my question is what value did u tried in mod 3?do anyone tried mod 3? Did it worked?what values did you put? TIA[/QUOTE]
2000 always worked good for me
Sent from my MB870 using xda premium
Hello, I have a verizon moto droid that I use in Mexico, so the question is, Can I use these mods on my phone?
Thanks for your response, and yes its cdma.
Which mods should I use? All of them, or just only one, or two?
Thanks for your help.
I am running Steel Droid ver 10.2 on my droid, and i am using Root Browser to edit the files, but I can not find "persist.ril.uart.flowctrl=1"
I can only find "persist sys purgeable_assets=1" and "persist sys.use_dithering=0", and what I did find was "rild.libpath=/system/lib/libmoto_ril.so", which I was adviced not to mess with it.
So my question is, if the line I am supposed to edit doesn`t exist, what do I do?
I am running Steel Droid ver 10.2 on my droid, and i am using Root Browser to edit the files, but I can not find "persist.ril.uart.flowctrl=1"
I can only find "persist sys purgeable_assets=1" and "persist sys.use_dithering=0", and what I did find was "rild.libpath=/system/lib/libmoto_ril.so", which I was adviced not to mess with it.
So my question is, if the line I am supposed to edit doesn`t exist, what do I do?
Add this in in you build prop somewhere persist.ril.uart.flowctrl=1
Your purgable assets one is for freeing memory and dithering is a video one I believe. Improves quality of things on your screen but uses extra CPU to do so. The last one is a path for you radios driver files best I can explain it.
persist.ril.uart.flowctrl=10 shouldn't hurt anything so see if it helps
Sent from my Galaxy Nexus using Tapatalk 2
Now, for some reason my droid has no data connection, I don´t know if I unvoluntarly, changed something else in the system, data is enabled in mobile network settings, so the question is, where can I check what is wrong with my phone? or what parameters do I have to check?
Last edited:
Does anyone know what these settings mean in system/build.prop. (ro.mot.phonemode.vzw4gphone=1)?
Sent from my MB870 using xda premium
Sent from my MB870 using xda premium
Likely has to do with 4g phones having a cdma only mode and a 4g/cdma mode
Sent from my Galaxy Nexus using Tapatalk 2
Ya I tried switching the =1 to a =10 and I think my speeds got faster cuz I only got like two bars where I'm at and my speeds are faster then when I had four bars. But idk if that's what it is or not
Sent from my MB870 using xda premium
Sent from my MB870 using xda premium
I've done 1 & 2 with marginal results. Where should I add the line in build.prop? Just anywhere or below mod 1?
Sent from my MB855 using xda app-developers app
Sent from my MB855 using xda app-developers app
Anywhere is fine the bottom is usually easiest. I don't know that it would work on the droid especiallymod 2. 1 and 3 would probably
Sent from my EVO using Tapatalk 2
I've been changing my flowcontrol as a standard because of this topic. My 3g has doubled at least. Ppl have asked to tether their 4g phone to mine just because of the speed difference.
STEEL BLUE NG CM9X2
Ha putting 4g to shame. Who needs new phones when we can just make our faster and better right
Sent from my MB870 using xda app-developers app
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
43Disclaimer: I am not responsible with what you do with your phone or anything that results from my edit/mods.
Nandroid Backup! Its your friend!
READ ENTIRE POST
Mention what rom and mods u used with results in a post please!
**If you flashed mashup and miss your data speed you need to redo mod 1**
One user that was plauged with switch to 1x being reported it being eliminated by the mods
Confirmed working on MIUI, eclipse 1.2 & 2.0.3, stock 2.3.4 and CM7
Mod 1 "may" work on any other 3G phones, mod 2 when posted "may" work on other 3G MOTO phones.
-----------------------------------------------------------------------------------------------------------------------
Mod 1
The Problem:
Since I do not have internet at home and I live in a poor service area any increase in 3G data speeds I can get is beneficial. So, I started looking into a way to increase my 3G data speeds.
Please let me know what rom you are using when you post something
Note: The first boot I did on some of these took a few minutes for 3G to first come up. Any reboots later it showed up immediately. I had no service issue and triangle once or twice while I was checking all of these. Reboot always fixed it.
The Solution:
First, nandroid backup prior to changing anything on your phone is a good policy to follow.
Most of the build.prop edits I’ve found are for GSM phones. I did find one thing that might help. I have confirmation from another source this hack works for them as well.
The line to be edited in build.prop which is in your /system/ folder by root explorer, root browser or any other editor/method of choice (make sure you backup your build.prop first):
Code:persist.ril.uart.flowctrl=1
Change the “1” to “10”, save your build.prop, and reboot.
You can change the 1 to 1-10 and null or blank.
These are my results below in kb/s.
1=baseline 75-100 kb/s
0= no service – Don’t do this!
2-5 = 100 kb/s with some temp increases
6-9 = 150-200 kb/s
10 = 250-350 kb/s
A null value gives me 150-300 kb/s with large fluctuations.
I found that “10” gave me the best speed with most consistent results.
These speeds were clocked in actual large file downloads not a speed testing app.
I found that speed testing apps do not give accurate results. The real downloading gives real results.
Note: With this a tester was getting 500kb/s downloading a rom over 3G.
Please reply back with any results you find as I am looking for conformation of my findings.
If you try this in a different ROM please let me know your findings as well. This SHOULD work in any rooted X2.
Doesn't work on liberty for the moment. Gonna attempt it on fully stock liberty soon
Thanks to MoonShadow-NM for his assistance with the write up
----------------------------------------------------------------------------------------------------------------
Mod 2 - Can be used along with Mod1
Atrix lib replacement mod
This mod I found helped with increasing data speeds in my poor service location as well as an increase in speed in a good service location
Signal at a horrible -102 dBm I was getting a consistant 200kb/s download where I only had 100kb/s before using this in conjunction with mod 1 at a value of 10
Signal at a nice -62 dBm I got a nice 400-500kbs consistant download speed where I only had 250-300kb/s before using this in conjunction with mod 1 at a value of 10
Note: You may see a better increase as I am a huge data user and subject to network optimization by evil red.
This mod at my house also stopped my phone from jumping between two towers. One with a -130 signal and the better with a -102.
The attached file is an Atrix lib_motoril.so file. It is a different file from our stock blur file. It is about 50kb smaller in size then any X2 blurbased non-port rom file I found. It was given to me to try by a Alien port user after talking with him about his nice data speeds and connections prior to any modifications.
This is a fairly easy file swapping mod.
Download the attached atrix lib and extract wherever you want.
Navigate to the /system/lib/ folder in a file manager of choice and either backup by placing a .bak after the .so of the original libmoto_ril.so file.
Go to where you extracted the Atrix lib file. Copy and paste that file to your /system/lib folder and then set permissions to the rw-r--r-- for it..
Reboot and let me know if you had the same good results as me.
Thanks to kinevil for the atrix lib and idea to try this file!
I make sure BSR is installed before I try anything so I can do a battery pull and get into BSR. Wipe cache and dalvik if any issues come up first then you can always nandroid after that if needed.
-----------------------------------------------------------------------------------------------------------------
Mod 3 - May help with connection stability. Not speed.
Easy build.prop addtion
In a fike manager such as root browser and root manager got to /system/ and open your build.prop to edit.
Add the following line.
Code:ro.mot.eri.losalert.delay=
The standard mod for this us 1000. Feel free to play around with it. Please post your results.
Happy modding!3
Use a real download from the web and watch it. This app works well to watch download rate https://market.android.com/details?id=info.kfsoft.android.TrafficIndicator
Looks to me like it doubled what's your app says on a before and after
Sent from my Cyanocrack using Xparent Blue Tapatalk2
Anywhere is fine the bottom is usually easiest. I don't know that it would work on the droid especiallymod 2. 1 and 3 would probably
Sent from my EVO using Tapatalk 222
