[MOD][APK+SCRIPT+ZIP] Enable Init.d for Any Phones w/o Need of Custom Kernels!!!

[Ryuinferno]

** NOT Android 4.3 compatible!!! Term-init is recommended for now!!!

**Note...this is only for those who do not have init.d support...if you are using custom kernels (cyanogen mod original kernel etc.) that already supports init.d, you shouldn't run this......but if you accidentally ran this, it is ok...won't mess up anything...

v1.0
init.d support through an app!!!​

What is init.d:

Init.d plays an important role in the world of Android development and customization It allows users to install scripts and mods to be run at boot—everything from battery tweaks to performance tweaks. It essentially opens the door to a world of mods only possible through the Init.d process, which in turn is usually only available on custom kernels.

But how?
Concept:
I have recently learnt some linux scripting and was searching for a method to enable init.d scripts support for my phone which has a stock kernel. Inspired by this thread by iridaki, I finally managed to get init.d working in my phone!!! However, I thought of the other users who still do not have a proper custom recovery...how are they gonna flash zip packages? And if it has to be done manually, it requires a lot of typing, changing file permissions etc....a very tedious process...

Therefore, I've decided to come up with a script to automate this process!!! *Drum rolls*...lol

BUT now, with the aid of Androguide.fr (creator of Pimp My ROM), we managed to integrate the script into an app to save the hassle of typing commands in terminal emulator! With just a button click, the commands will be carried out! With just a button click, the app will verify whether is there init.d support or not!


Do I have init.d support?:
Well, here is a way to test:
1. Download the file from here: View attachment 1612958
2. Extract the file, you will get a file named 00test. DO NOT flash!
3. Paste it into /etc/init.d. If there is no init.d folder, most probably you DO NOT have init.d support. However, if you still wanna try, just create the folder named "init.d"
4. Change the permissions of the init.d folder and 00test into rwxrwxrwx.
5. Reboot.
6. If you see a file named Test.log in /data, you have init.d support. If not, you will have to run Uni-init, Term-init or Zip-init.


Features:
- Utilises install-recovery.sh (if your kernel supports that, but of course, but most do...) to enable init.d scripts (busybox run-parts required)
- Will add lines in install-recovery.sh if it already exists (will not replace install-recovery.sh because certain apps such as Link2SD requires that to work), creates it if it doesn't
- Creates the init.d folder with correct permissions
- Adds 2 init.d scripts: one for testing (shows time of execution), another to ensure that the scripts in init.d folder always have the correct permissions
- Adds sysinit in /system/bin, will add the required lines if it already exists
- Deletes duplicate files and lines to ensure the least of errors



Requirements:
- a rooted phone of course...

- busybox with required applets (especially run-parts), if not sure what is this, just install this by Stericson: Link and please reboot after installing before running this script......use "normal install" method, don't use "smart install"...


Instructions:
1. Download the apk.
2. Install the apk like any normal app.
3. Launch the app.
4. The rest are pretty self-explanatory...
5. You can uninstall the app after that...

Screenshots:

**To check whether init.d is really working or not, reboot your phone and navigate to /data...you should find a Test.log in there...If it is present, congrats, you have a WORKING init.d support!



Download:
If you have already read all the instructions and understand them, then click here to download:

Uni-init v1.0.apk

Credits:
Thanks to:
Androguide.fr for the android app base!


Donators (big thank you! ):
@bigknowz


Feel free to posts questions below...I will try my best to help......By the way, those who used the app and found that it works, please leave a post here, stating you phone model, android version and ROM...thanks! but don't just leave comnents saying 'it doesn't work' etc...give more details if possible...

Please don't mirror / modify my work, ask for permissions first...​

 

[Ryuinferno]

**UPDATE: v3 is out now! Android 4.3 compatible!

**Term-init is also used in Droid Manager!!!**

**Featured in the XDA News Portal: Init.d Support for Any Rooted Phone (Thanks to the_scotsman!)


Hi guys...as stated in the title above, I have created a script to be ran in terminal emulator so that it will enable the support of init.d scripts!!!

**Note...this is only for those who do not have init.d support...if you are using custom kernels (cyanogen mod original kernel etc.) that already supports init.d, you shouldn't run this......but if you accidentally ran this, it is ok...won't mess up anything...

init.d support through terminal emulator!!!​

What is init.d:

Init.d plays an important role in the world of Android development and customization It allows users to install scripts and mods to be run at boot—everything from battery tweaks to performance tweaks. It essentially opens the door to a world of mods only possible through the Init.d process, which in turn is usually only available on custom kernels.

But how?
Concept:
I have recently learnt some linux scripting and was searching for a method to enable init.d scripts support for my phone which has a stock kernel. Inspired by this thread by iridaki, I finally managed to get init.d working in my phone!!! However, I thought of the other users who still do not have a proper custom recovery...how are they gonna flash zip packages? And if it has to be done manually, it requires a lot of typing, changing file permissions etc....a very tedious process...

Therefore, I've decided to come up with a script to automate this process!!! *Drum rolls*...lol


Do I have init.d support?:
Well, here is a way to test:
1. Download the file from here: View attachment test_initd.zip
2. Extract the file, you will get a file named 00test. DO NOT flash!
3. Paste it into /etc/init.d. If there is no init.d folder, most probably you DO NOT have init.d support. However, if you still wanna try, just create the folder named "init.d"
4. Change the permissions of the init.d folder and 00test into rwxrwxrwx.
5. Reboot.
6. If you see a file named Test.log in /data, you have init.d support. If not, you will have to run Uni-init, Term-init or Zip-init.


Features:
- Auto checks for required files [v2]
- Utilises install-recovery.sh (if your kernel supports that, but of course, but most do...) to enable init.d scripts (busybox run-parts required)
- Will move install-recovery.sh to install-recovery-2.sh if it already exists and call it from the main install-recovery.sh (will not replace install-recovery.sh because certain apps such as Link2SD requires that to work), creates it if it doesn't [v3]
- If Superuser is using install-recovery.sh, will use install-recovery-2.sh instead [v3]
- Creates the init.d folder with correct permissions
- Adds 2 init.d scripts: one for testing (shows time of execution [v2]), another to ensure that the scripts in init.d folder always have the correct permissions
- Adds sysinit in /system/bin, will add the required lines if it already exists. This is for utilising a similar method to enabling init.d in AOSP ROMs



Requirements:
- a rooted phone of course...

- busybox with required applets (especially run-parts), if not sure what is this, just install this by Stericson: Link and please reboot after installing before running this script......use "normal install" method, don't use "smart install"...

- terminal emulator such as this: Link



Instructions:
1. Download the file.
2. Place it in the root of your sdcard directory.
3. Launch terminal emulator.
4. Type: su
5. Grant SuperUser access if prompted
6. Type: sh /sdcard/term-init.sh
7. The script will run and follow the instructions! As simple as that...

**To check whether init.d is working or not, reboot your phone and navigate to /data...you should find a Test.log in there...If it is present, congrats, you have init.d support!



Download:
If you have already read all the instructions and understand them, then click here to download:

term-init.sh v3

Feel free to posts questions below...I will try my best to help......By the way, those who used my script and found that it works, please leave a post here, stating you phone model, android version and ROM...thanks! but don't just leave comnents saying 'it doesn't work' etc...give more details and screenshots if possible...

Please don't mirror / modify my work, ask for permissions first...

Source code & changelog: https://github.com/Ryuinferno/Term-init​

 

[Ryuinferno]

** NOT Android 4.3 compatible!!! Term-init is recommended for now!!!

**Note...this is only for those who do not have init.d support...if you are using custom kernels (cyanogen mod original kernel etc.) that already supports init.d, you shouldn't run this......but if you accidentally ran this, it is ok...won't mess up anything...

As Term-init does not work for certain people, I have came up with a CWM flashable zip:

init.d support through CWM!!! ​

What is init.d:

Init.d plays an important role in the world of Android development and customization It allows users to install scripts and mods to be run at boot—everything from battery tweaks to performance tweaks. It essentially opens the door to a world of mods only possible through the Init.d process, which in turn is usually only available on custom kernels.

Do I have init.d support?:
Well, here is a way to test:
1. Download the file from here: test_initd.zip
2. Extract the file, you will get a file named 00test. DO NOT flash!
3. Paste it into /etc/init.d. If there is no init.d folder, most probably you DO NOT have init.d support. However, if you still wanna try, just create the folder named "init.d"
4. Change the permissions of the init.d folder and 00test into rwxrwxrwx.
5. Reboot.
6. If you see a file named Test.log in /data, you have init.d support. If not, you will have to run Uni-init, Term-init or Zip-init.


Features:
- Utilises install-recovery.sh (if your kernel supports that, but of course, but most do...) to enable init.d scripts (busybox run-parts required)
- Will add lines in install-recovery.sh if it already exists (will not replace install-recovery.sh because certain apps such as Link2SD requires that to work), creates it if it doesn't
- Creates the init.d folder with correct permissions
- Adds 2 init.d scripts: one for testing, another to ensure that the scripts in init.d folder always have the correct permissions
- Adds sysinit in /system/bin, will add the required lines if it already exists
- Deletes duplicate files and lines to ensure the least of errors



Requirements:
- a rooted phone of course...

- busybox with required applets (especially run-parts), if not sure what is this, just install this by Stericson: Link and please reboot after installing before running this script......use "normal install" method, don't use "smart install"...
- a working CWM custom recovery


Instructions:
1. Download the file.
2. Flash zip-init.zip thorough CWM.
3. Reboot and you are done!

**If you get a status 0 error in CWM, please replace the update-binary in zip-init.zip with a working update-binary of your phone (just extract it from any CWM zip meant for your phone)...

**To check whether init.d is working or not, reboot your phone and navigate to /data...you should find a Test.log in there...If it is present, congrats, you have init.d support!



Download:
If you have already read all the instructions and understand them, then click here to download:

zip-init.zip v2

Feel free to posts questions below...I will try my best to help......By the way, those who used my mod and found that it works, please leave a post here, stating you phone model, android version and ROM...thanks! but don't just leave comnents saying 'it doesn't work' etc...give more details and screenshots if possible...

Please don't mirror / modify my work, ask for permissions first...​

 

[Ryuinferno]

Troubleshooting

Troubleshooting:
**CWM might warn something about disable recovery flash when using this mod, it is just a false positive, please DO NOT select yes or else it won't work anymore**

If you have already applied the script but there is no /data/Test.log, please refer the steps below:
1. Check whether have you installed busybox properly, especially run-parts. REBOOT after installing, then only apply this script.
2. If you are using the busybox installer by Stericson, please use "normal installation method", NOT "smart installation method".
3. Check whether are these files present with the correct permissions (please change if the permissions are wrong):
- /system/bin/sysint (rwxr-xr-x) [owner: root (0), group: shell (2000)]
- /system/etc/init.d (rwxrwxrwx) [owner: root (0), group: root (0)]
- /system/etc/init.d/00test (rwxrwxrwx) [owner: root (0), group: root (0)]
-/system/etc/init.d/08setperm (rwxrwxrwx) [owner: root (0), group: root (0)]
- /system/etc/install-recovery.sh (rwxr-xr-x) [owner: root (0), group: root (0)]
- /system/etc/install-recovery-2.sh (rwxr-xr-x) [owner: root (0), group: root (0)] (may or may not be present)
4. Check whether you have run-parts installed. Go to /system/xbin, you should be able to find a fine named "run-parts"
5. Check whether you have these lines in /system/etc/install-recovery.sh (if not, please add them in manually (using Root Explorer or keep the EOL in Unix format...Google about it), remember to leave an EMPTY line at the end of the file)

 # init.d support
busybox run-parts /system/etc/init.d/

6. If all the above are still not helping, please download this: run-parts.zip and extract it (DO NOT flash it). Place the file named "run-parts" in /system/xbin. Change permissions to rwxrwxrwx, owner to root (o) and group to shell (2000). Reboot and check /data again.
7. Still fails? Check your /init.rc for any lines containing "install-recovery"...if there are none, this method won't work...so use the Script Manager method.
8. Use this as a last resort: Download Script Manager from Play Store: Link. Then navigate to /etc/install-recovery.sh, select it and run as root and at boot (select the skull and gear icon).
9. If all the above are not working, and the "install-recovery" line is present, then please paste the contents of your /etc/install-recovery.sh and /etc/install-recovery-2.sh if present somewhere (like http://pastebin.com and after applying the mod of course) here for me to debug. Take a screenshot of the output after running Term-init and post here, along with your ROM version, android version and name of device.

 

[ranjitkhera]

ace 5830i stock rom

Hi guys...as stated in the title above, I have created a script to be ran in terminal emulator so that it will enable the support of init.d scripts!!!

Term-init --> init.d support through terminal emulator!!!

But how?
Concept:
I have recently learnt some linux scripting and was searching for a method to enable init.d scripts support for my phone which has a stock kernel. Inspired by this thread by iridaki, I finally managed to get init.d working in my phone!!! However, I thought of the other users who still do not have a proper custom recovery...how are they gonna flash zip packages? And if it has to be done manually, it requires a lot of typing, changing file permissions etc....a very tedious process...

Therefore, I've decided to come up with a script to automate this process!!! *Drum rolls*...lol


Features:
- Utilises install-recovery.sh to enable init.d scripts (busybox run-parts required)
- Will add lines in install-recovery.sh if it already exists (will not replace install-recovery.sh because certain apps such as Link2SD requires that to work), creates it if it doesn't
- Creates the init.d folder with correct permissions
- Adds 2 init.d scripts: one for testing, another to ensure that the scripts in init.d folder always have the correct permissions
- Adds sysint in /system/bin, will add the required lines if it already exists
- Deletes duplicate files and lines to ensure the least of errors



Requirements:

- busybox with required applets (especially run-parts), if not sure what is this, just install this by Stericson: BusyBox

- terminal emulator such as this



Instructions:
1. Download the file.
2. Place it in the root of your sdcard directory.
3. Launch terminal emulator.
4. Type: su
5. Grant SuperUser access if prompted
6. Type: sh /sdcard/term-init.sh
7. The script will run and follow the instructions! As simple as that...

Example:

**To check whether init.d is working or not, reboot your phone and navigate to /data...you should find a Test.log in there...If it is present, congrats, you have init.d support!



Download:
If you have already read all the instructions and understand them, then click here to download:

term-init.sh

Feel free to posts questions below...I will try my best to help...

Hit the thanks button if you liked my work...it gives me a boost!
Please don't mirror / modify my work, ask for permissions first...​

its not working

 

[Ryuinferno]

its not working

Well, are the all the files present? Did you follow all the steps? I suggest you to reinstall busybox by using the link I gave...then attempt this again...

 

[slurpdroid]

This mod work on MIUI UK official for desire s
Tested with v6 supercharger by zep
Thanks a lot

Sent from my HTC Desire S using xda app-developers app

 

[hexer7568]

Hi ,

I use an Motoluxe xt615 , i Fllow your guide step by step . But nothing.

The Phone Restarts an in /data is no Test.log

Busybox install Terminal install . Terminal say all is ok but the test.log fails. After Reboot i cant find it.


Sorry for my bad Englisch

 

[Ryuinferno]

Hi ,

I use an Motoluxe xt615 , i Fllow your guide step by step . But nothing.

The Phone Restarts an in /data is no Test.log

Busybox install Terminal install . Terminal say all is ok but the test.log fails. After Reboot i cant find it.


Sorry for my bad Englisch

Ok...let me interpret...you installed busybox by using the link I gave, then you ran this in terminal emulator right? Can you please give me a screenshot of your terminal emulator running this script? Thanks...

 

[hexer7568]

Ok...let me interpret...you installed busybox by using the link I gave, then you ran this in terminal emulator right? Can you please give me a screenshot of your terminal emulator running this script? Thanks...

how can i make this???

ah ok

http://s1.directupload.net/file/d/3042/ofxoh9z3_png.htm

 

[Ryuinferno]

Err...run the script in terminal emulator, when it finished running, take a screenshot...

 

[hexer7568]

Err...run the script in terminal emulator, when it finished running, take a screenshot...

http://s1.directupload.net/file/d/3042/ofxoh9z3_png.htm

 

[Ryuinferno]

how can i make this???

ah ok

http://s1.directupload.net/file/d/3042/ofxoh9z3_png.htm

Ok...by looking at your first few lines...I saw that su permissions for terminal emulator are not granted properly...and my script seems to be only running in the surface (only shows the text)...did you reboot after installing busybox? And by the way, please check your /system/etc...is there a init.d folder and a file named "install-recovery.sh"? And what andriod version are you using?

P.s. A working example should be like my screenshot on the first page...the first few lines in your screenshot should not appear...

 

[Ryuinferno]

Ok...I will include a flashable zip soon...cause terminal emulator does not seem to work with some...

 

[hexer7568]

Ok...by looking at your first few lines...I saw that su permissions for terminal emulator are not granted properly...and my script seems to be only running in the surface (only shows the text)...did you reboot after installing busybox? And by the way, please check your /system/etc...is there a init.d folder and a file named "install-recovery.sh"? And what andriod version are you using?

P.s. A working example should be like my screenshot on the first page...the first few lines in your screenshot should not appear...

1 Reboot after busybox install no

2, no
3. no

 

[Ryuinferno]

That's why...the script did not have the correct permissions to run...did you grant terminal emulator su access when you type "su"? Try installing busybox again, reboot, run the script and reboot again...

 

[hexer7568]

That's why...the script did not have the correct permissions to run...did you grant terminal emulator su access when you type "su"? Try installing busybox again, reboot, run the script and reboot again...

When i type su , the first massage is "log_write: cannot open Device" , then after this massage i have su

 

[Ryuinferno]

When you type "su" for the first time after installing terminal emulator, a pop up will appear, asking you to grant or deny superuser access...did that happen?

 

[hexer7568]

When you type "su" for the first time after installing terminal emulator, a pop up will appear, asking you to grant or deny superuser access...did that happen?

i install emulator new, and i lock that

 

[Ryuinferno]

Ok..seems that the su access in your terminal emulator is not working well, so I will upload a cwm zip soon...wait for that...