I am happy to present my StereoMod based on dontbelieve mod from Z1.I did modify XZ snd_soc_msm files so that they will output Speaker and Earpiece at the same time like in Z1 mod.
What will this do?
Achieve real Stereo and surround sound effect from both left and right channels by using earpiece as additional speaker.
To test out rotate the device to landscape and try some stereo video or music.
Try this:
-Left/Right Stereo Audio/Visual Test.: http://youtu.be/dvqbq_0jZ_U
-Dolby Digital - HD Surround Sound Test: http://youtu.be/PvnlpPWAcZc
Disclaimer
I am not responsible for any damage caused by this mod. Eg, your phone is broken, you miss any important call, alarm didn't go off and you were late for work, or your earpiece is busted. It's your own risk. Proceed with Caution, you have been warn.
Requirement:
Not satisfied just yet? (obsolete)
How about having full control over the volume for both speaker and earpiece?
How about swapping left and right channels? with the cost of broken Loudspeaker during call (obsolete)
UninstallObsolete, use uninstall or restore options of the aroma instead
Download Link:
-StereoMod v1.2 tweak by Metallijim - http://www.mediafire.com/view/55m2wc9tsvys615/snd_soc_msm_2x_Fusion3(Metallijim_mod
This tweak will REDUCE speaker volume which will possibly BALANCE OUT the differences between speaker and earpiece volume.
Credit:
-dontbelieve - for Z1 Stereo Mod
-Metallijim - a great beta tester and for a beautiful aroma splash screen! Well done mate
-androidfreak70 - a great help
-Anyone - who made recovery and aroma possible
-Sony
What will this do?
Achieve real Stereo and surround sound effect from both left and right channels by using earpiece as additional speaker.
To test out rotate the device to landscape and try some stereo video or music.
Try this:
-Left/Right Stereo Audio/Visual Test.: http://youtu.be/dvqbq_0jZ_U
-Dolby Digital - HD Surround Sound Test: http://youtu.be/PvnlpPWAcZc
Disclaimer
I am not responsible for any damage caused by this mod. Eg, your phone is broken, you miss any important call, alarm didn't go off and you were late for work, or your earpiece is busted. It's your own risk. Proceed with Caution, you have been warn.
Requirement:
Installation:
- Xperia Z, Xperia ZR or Xperia ZL
- Stock, or Stock Base 4.3-4.4.4, Dirty Unicorn v7.8(4.4.4), KMA AOSPA 30/07 or possibly all custom roms, u name it?
- recovery installed
- 4-way rotation enabled, if auto channel swapping is selected.
- Rooted
Manual Installation: obsolete
- Download the latest version of StereoMod.zip
- Flash it through recovery
- Select backup feature of the aroma, so you can always restore it back.
- Select your preferred channels configurations, features, volumes and install.
- Reboot
- Unzip the package
- Copy snd_soc_msm_2x_Fusion3 from the package
- Replace this file in to /system/etc/snd_soc_msm folder
- Set permission -rw-r--r--(644).
- And Reboot!
Not satisfied just yet? (obsolete)
How about having full control over the volume for both speaker and earpiece?
Open the snd_soc_msm_2x_Fusion3 file that you just replaced and edit with editor. I recommended using 920 Text Editor or DroidEdit on mobile which could run such a big code.
Go to line #2966, you will see that the following code is related to speaker. Scroll down to line #2985 and #2986, you will see these code:
If you scroll down alittle bit to line #3010, you'll noticed instantly that it is related to xLoud on. Do the same to Line #3029 and #3030.
Go to line #2966, you will see that the following code is related to speaker. Scroll down to line #2985 and #2986, you will see these code:
'RX1 Digital Volume':1:73
'RX3 Digital Volume':1:71
RX1 is Earpiece and RX3 is Loudspeaker. Change these blue values will effect the volumes for xLoud off.'RX3 Digital Volume':1:71
If you scroll down alittle bit to line #3010, you'll noticed instantly that it is related to xLoud on. Do the same to Line #3029 and #3030.
'RX1 Digital Volume':1:74
'RX3 Digital Volume':1:72
Change these values will effect volumes for xLoud on. Becareful not to raise RX1 volume too high, it might fry your earpiece. Both of their stock default value is 68. You take full responsible for your own tweak.'RX3 Digital Volume':1:72
How about swapping left and right channels? with the cost of broken Loudspeaker during call (obsolete)
As now you are familiar with the code. I'll go short this time.
Modify these Lines between line #2972 and line #2975.
Modify these Lines between line #2972 and line #2975.
'RX3 MIX1 INP1':0:RX1
'RX3 MIX1 INP2':0:RX6
'RX1 MIX1 INP1':0:RX2
'RX1 MIX1 INP2':0:RX7
And these Lines between line #3016 and line #3019'RX3 MIX1 INP2':0:RX6
'RX1 MIX1 INP1':0:RX2
'RX1 MIX1 INP2':0:RX7
'RX3 MIX1 INP1':0:RX1
'RX3 MIX1 INP2':0:RX6
'RX1 MIX1 INP1':0:RX2
'RX1 MIX1 INP2':0:RX7
All you have to do is to replace all RX3 with RX1 and all RX1 with RX3 in the BLUE values. And you're done.'RX3 MIX1 INP2':0:RX6
'RX1 MIX1 INP1':0:RX2
'RX1 MIX1 INP2':0:RX7
- Flash StereoMod XZ-Revert.zip and reboot
Download Link:
Beta: (obsolete)
- v4.0 - https://www.mediafire.com/?laink00e1br010e
- v2.0 - http://www.mediafire.com/view/qzvt1e272s5v8gs
- v1.2 - http://www.mediafire.com/download/or4xz7z941jy11m/StereoMod_XZ_v1.2.zip
- v1.1 - http://www.mediafire.com/download/727h9hu2c57xt57/StereoMod_XZ_v1.1.zip
- Revert - http://www.mediafire.com/?6y6pdfye4ro2yyy
-StereoMod v1.2 tweak by Metallijim - http://www.mediafire.com/view/55m2wc9tsvys615/snd_soc_msm_2x_Fusion3(Metallijim_mod
This tweak will REDUCE speaker volume which will possibly BALANCE OUT the differences between speaker and earpiece volume.
If you like my works and want to support future development. Please donate to me or buy me a bear,... I meant Beer.

Bitcoin: 1Etkcm3bhpdr7htMwAzRN1CQnUodq42jLn
Changelog:
Bitcoin: 1Etkcm3bhpdr7htMwAzRN1CQnUodq42jLn
Bugs:v4.0:
- Bring Default channel back
- Make S-Force as an option
- Backup and Restore feature - for any rom
- Uninstall option - mostly for stock rom
- Added Safety measure
- Fix small bugs from v3.0
- Optimized snd file
v3.0:
->Skipped<-
- Auto channel swapping based on device rotation, but it tend to swap only when the device is in portrait, or in upside down portrait.(Only for Stock 4.4.4)
- S-Force ported from Xperia Tablet Z (Included with Auto channel swapping, Only for Stock 4.4.4)
- xLoud as a channel swapping switch!-xLoud always enabled
- Fixed Loudspeaker on call bug for swapped channel-Finally!
- Stereo Ringer as an option
- Stereo FM radio as an option
- Top notch volumes
- Earpiece boost
- Optimised Headphone boost
- Updated snd file to 4.4.4
v2.0:
- Simplified aroma installer
- Various volume level choices
- Swapped channels enabled, but earpiece as a loudspeaker in call.
- Headphone boost
- Earpiece boost
- Ringer boost
- Bass boost - hopefully slightly!
v1.2:
- extra volume boost
- Distortion reduction
- Swapped channels to fix loudspeaker during call
v1.1:
- Volume Boost
v1.0:
- initial release
- let me know
- Auto Channel swapping only swap during portrait and upside down portrait, instead of landscape!
won't active loudspeaker during phonecall?
Credit:
-dontbelieve - for Z1 Stereo Mod
-Metallijim - a great beta tester and for a beautiful aroma splash screen! Well done mate
-androidfreak70 - a great help
-Anyone - who made recovery and aroma possible
-Sony
Last edited: