• XDA Forums have been migrated to XenForo. We are aware of several issues including missing threads, logins not working, and more. To discuss, use this thread.

[MOD]{CM10.1}{CM10.2}{CM11}{AOSP}Working Int2Ext for Xperia 2011 [ART-compatible]

nos1609

New member
Feb 16, 2009
229
210
0
Moscow
After days of looking for a solution to the problem of every 2011 device I've finally managed to do it!

Many of you wanna enable ART functionnality in 4.4.2 because the device start "flying" with such a pill. So I've managed to modify the Int2Ext v2 script to run it lagless and conserving initial performance.

Prerequesites:
1. You have to make an EXT partition (I've got an EXT4 1 GB partition)
2. Flash the script BEFORE the first boot (like any other package such as gapps).
3. (Optionnal) Reboot once, and enable ART in developement menu.
4. Enjoy!

What it does exactly?
1. Increase the readahead cache for your sd to 4096 kb
2. Transfers /data/app & /data/app-private to the ext partition of the SD
3. Everything that a CronMod-INT2EXT script does

Screenshots



All credits goes to the creator of the original script. Ive simply deleted a line inside ;)


You're welcome for testing.:good:

Small FAQ & corrected verision to avoid signal loss:
1. Tested in couple with Vanir/Carbon - unstable under ART, Dalvik recommanded
Tested on PAC working like a charm on both ART & Dalvik

2. To avoid reboots / FCs try flashing ART compatible gapps

3. About the "internal memory waste" Guys, please check the description of what the script is doing and what folders are moved onto EXT-partition. If everything would so simle as that, even ART mode couldn't overcome the laggynes and the lack of performance after moving everything to sdcard. The script is moving ONLY APKs to the EXT-partition. Dalvik, libs etc remains on the 470 Mb NAND to conserve initial performance. But enen that amount of free space is not enough to run ART experience at it full potential. because of very large dalvik-cache size.

4. EXT partition. Just google, XDA contains tons of manuals and tools to create one. If you'd like to simply try ART 512 MB one will be enough, you'll reach the internal NAND limitation. If you want using it in normal mode you can make the partition as large as you like.

5. Concerning the loss of signal, I think there are some lack of time for the device itself to get the new location of the files, so try this new package.
Those who have issue with signal loss after flash this script there is a way out... Just install Link2sd after flashing the script... Open Link2sd, give super user permissions and Link2sd will automatically create scripts and ask you to reboot.... thats is..... you should be able to get signals after reboot.... You can even uninstall Link2Sd after rebooting....

For me it is working in Mike's latest build, PA final build and Pac man latest build....
UPDATE: Working fix for signal loss
 
Last edited:

badboy4a2

New member
May 10, 2011
108
9
0
Mumbai
Hello, I really wanted to try this, and partitioned my SD card. Now, i am not able to see the created 1GB ext4 partition. I created that partition with MINITool Partition Wizard. For restoring it, I tried using GParted also but of no use. Out of 7.4 GB, only 6.4 is accessible. Kindly help. And one more thing. Dark Kernel is not even recognizing the SD Card.
 

WaterMelon90

New member
Mar 6, 2013
406
93
0
Penang
@nos1609 , I had tried it in C-rom. I flashed it after the installation of C-rom then reboot. However, it can't boot into system. Anyone faced this problem? I had wait for the boot around 15-20 minutes but it stuck.

Can I:
1) Install rom, reboot into system.
2) Reboot into recovery and flash the zip then reboot.??
 

dan15

New member
Nov 21, 2007
142
33
0
Aurillac
@nos1609 , I had tried it in C-rom. I flashed it after the installation of C-rom then reboot. However, it can't boot into system. Anyone faced this problem? I had wait for the boot around 15-20 minutes but it stuck.

Can I:
1) Install rom, reboot into system.
2) Reboot into recovery and flash the zip then reboot.??
for me, it's also the only way to boot. nevertheless, i have no signal :( i tried the 2.1 version but no more success...
 

wolvgank

New member
Aug 9, 2011
46
3
0
SAMARINDA
It's not working on AOSB, XUK, and C-ROM.. i tried it in the first boot after install new rom and i got a bootloop,, 30 minutes and still at boot animation..
anyone know how to make it works? really wanted to use it in 4.4 rom.. is it because the kernel? because i using the kernel provide in the rom.
sorry for the noob question.
 

atomrat

New member
Jun 29, 2009
167
50
0
Install rom.boot the rom then reboot to recovery and install script for me always works

Wysłane z mojego MT11i przy użyciu Tapatalka
 

tahassadi

New member
Dec 13, 2013
64
14
0
After days of looking for a solution to the problem of every 2011 device I've finally managed to do it!

Many of you wanna enable ART functionnality in 4.4.2 because the device start "flying" with such a pill. So I've managed to modify the Int2Ext v2 script to run it lagless and conserving initial performance.

Prerequesites:
1. You have to make an EXT partition (I've got an EXT4 1 GB partition)
2. Flash the script BEFORE the first boot (like any other package such as gapps).
3. (Optionnal) Reboot once, and enable ART in developement menu.
4. Enjoy!

What it does exactly?
1. Increase the readahead cache for your sd to 4096 kb
2. Transfers /data/app & /data/app-private to the ext partition of the SD
3. Everything that a CronMod-INT2EXT script does

Screenshots



All credits goes to the creator of the original script. Ive simply deleted a line inside ;)


You're welcome for testing.:good:

Small FAQ & corrected verision to avoid signal loss:eek:riginally Posted by nos1609 View Post
1. Tested in couple with Vanir/Carbon - unstable under ART, Dalvik recommanded
Tested on PAC working like a charm on both ART & Dalvik

2. To avoid reboots / FCs try flashing ART compatible gapps

3. About the "internal memory waste" Guys, please check the description of what the script is doing and what folders are moved onto EXT-partition. If everything would so simle as that, even ART mode couldn't overcome the laggynes and the lack of performance after moving everything to sdcard. The script is moving ONLY APKs to the EXT-partition. Dalvik, libs etc remains on the 470 Mb NAND to conserve initial performance. But enen that amount of free space is not enough to run ART experience at it full potential. because of very large dalvik-cache size.

4. EXT partition. Just google, XDA contains tons of manuals and tools to create one. If you'd like to simply try ART 512 MB one will be enough, you'll reach the internal NAND limitation. If you want using it in normal mode you can make the partition as large as you like.

5. Concerning the loss of signal, I think there are some lack of time for the device itself to get the new location of the files, so try this new package.


With new package signal is still lost :crying:[error selecting network while search]
 

gurgao

New member
Dec 17, 2013
282
43
0
35
GURGAON
make both the partitions as primary

Hello, I really wanted to try this, and partitioned my SD card. Now, i am not able to see the created 1GB ext4 partition. I created that partition with MINITool Partition Wizard. For restoring it, I tried using GParted also but of no use. Out of 7.4 GB, only 6.4 is accessible. Kindly help. And one more thing. Dark Kernel is not even recognizing the SD Card.
just make sure u make both the partitions as primary while creating the partitions, i know u must have figured it out in 2 months ;)
 

Raeigis

New member
Sep 8, 2013
64
4
0
Will it work on KitKat Resurrection ROM ? Don't want to loose signal after flash it :/

Envoyé de mon MT11i en utilisant Tapatalk
 
Our Apps
Get our official app! (coming soon)
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone