[MOD][JELLYBEAN] Extended Power Menu Mods

Paul627g

Senior Member
Dec 13, 2010
602
226
0
Plainfield, Il.
First I have to give credit where credit is due for the original work.. I just ported it into the NS4G version.

I have to thank djmcnz for providing an awesome guide on how to do this mod and sharing it with everyone. That is what development is all about... Sharing...

Anyways onto the goods.....

REBOOT, REBOOT TO RECOVERY & BOOTLOADER EXTENDED POWER MENU FOR JELLYBEAN/NS4G




Aside from the obvious Reboot & Reboot to Recovery, you LONG PRESS on Recovery and it will boot into your bootloader.

Note: This is based on the most current version of JellyBean for the NS4G (version 7)

Download v7 : Extended Power Menu v7 (Flash in CWM/TWRP)


Previous Versions:


Download v6a : Reboot-Recovery-Bootloader-JellyBean-Mod (Flash in CWM/TWRP) Wiping not required
 
Last edited:

kangta05

Senior Member
Aug 19, 2010
139
27
48
Phone just loops

First I have to give credit where credit is due for the original work.. I just ported it into the NS4G version.

I have to thank djmcnz for providing an awesome guide on how to do this mod and sharing it with everyone. That is what development is all about... Sharing...

Anyways onto the goods.....

REBOOT, REBOOT TO RECOVERY & BOOTLOADER EXTENDED POWER MENU FOR JELLYBEAN/NS4G




Aside from the obvious Reboot & Reboot to Recovery, you LONG PRESS on Recovery and it will boot into your bootloader.

Note: This is based on the most current version of JellyBean for the NS4G (version 6a)

Download : Reboot-Recovery-Bootloader-JellyBean-Mod (Flash in CWM/TWRP) Wiping not required

Downloaded and flashed over the correct rom. After Boot and unlocking phone it will loop back to the boot animation after about 10 seconds
 

Paul627g

Senior Member
Dec 13, 2010
602
226
0
Plainfield, Il.
Downloaded and flashed over the correct rom. After Boot and unlocking phone it will loop back to the boot animation after about 10 seconds
Hello,

Sounds like you could have had a bad flash or the possibility you weren't running version 6a.

Hopefully you made a nandroid backup before you flashed and you can restore that and try flashing the mod again.

This is the first reported fail after about 200 downloads of this modification.

Good luck, report back.

Paul
 

kangta05

Senior Member
Aug 19, 2010
139
27
48
Retry

Hello,

Sounds like you could have had a bad flash or the possibility you weren't running version 6a.

Hopefully you made a nandroid backup before you flashed and you can restore that and try flashing the mod again.

This is the first reported fail after about 200 downloads of this modification.

Good luck, report back.

Paul
LOL i was stupid and didnt back up the rom but it wasnt much on there. But I forgot to say thank you in the first place. I'm about to backup the rom and re-try, will report back later
 

kangta05

Senior Member
Aug 19, 2010
139
27
48
Works Great

Hello,

Sounds like you could have had a bad flash or the possibility you weren't running version 6a.

Hopefully you made a nandroid backup before you flashed and you can restore that and try flashing the mod again.

This is the first reported fail after about 200 downloads of this modification.

Good luck, report back.

Paul
Reported back , reflashed the rom and then redownloaded and flashed mod, it works great. Thank you for your great work
 
  • Like
Reactions: Paul627g

Paul627g

Senior Member
Dec 13, 2010
602
226
0
Plainfield, Il.
it's a wish. If you could add screenshot( I use this alot) and torch(convenient). It would be incredible. Anyone else?
Screenshot can still be easily achieved just using the standard Power & Volume Down option. I know many devs throw in that screenshot mod to the reboot menu but to be it seems a little pointless. I will look into seeing what I can do, no promises..

Torch.. That I think is a ways off still.
 
  • Like
Reactions: n2d551

vadbess

Senior Member
Dec 9, 2008
87
2
8
Kiev
I can't flash it.. it saying its for nexus 4g.

Sent from my Crespo using Jelly Bean
Similarly, can't flash it :(

---------- Post added at 11:42 AM ---------- Previous post was at 11:18 AM ----------

Similarly, can't flash it :(
HAAA i cracked it, and install to crecpo
I opened file updater-script (in zip) and find ro.product.device - changed parameter from "crespo4g" to "crespo"
 
  • Like
Reactions: umairmalik2410

Paul627g

Senior Member
Dec 13, 2010
602
226
0
Plainfield, Il.
I can confirm this works for nexus s! But after rebooting the haptic feedback for the touch buttons are really weak!
Yep should work on the Nexus S after redoing the updater script. Haptic feedback was not affected or changed for this so it really should not be affecting it. In no way was files for haptic feedback even touched.