[MOD][MA4/MA6/MB1/MK3] PRL Write Enabler & ##DEBUG# prompt removal

ruckstande · Mar 7, 2013

Re: [MOD][MA4/MA6] PRL Write Enabler & ##DEBUG# lock code removal

digiblur said:
I will update it anyways though as I remove the debug code prompt as well.

Sent from my little Note2

Nevermind.

hayzooos · Mar 8, 2013 at 7:50 PM

Just a quick update to confirm this does work on MB1. The AnyCut PRL Write shortcut won't though, it kept giving me an error. It would open for a quick second then close right away. I had to go in through the dialer and use ##DATA# and do it that way. Thanks digiblur.

digiblur · Mar 8, 2013 at 8:58 PM

Re: [MOD][MA4/MA6] PRL Write Enabler & ##DEBUG# lock code removal

hayzooos said:
Just a quick update to confirm this does work on MB1. The AnyCut PRL Write shortcut won't though, it kept giving me an error. It would open for a quick second then close right away. I had to go in through the dialer and use ##DATA# and do it that way. Thanks digiblur.

I could never get that one to work on the Note2. I guess the fixed it on the S3 now.

Sent from my little Note2

Jimieo · Mar 11, 2013 at 2:43 AM

Not having luck with this on MB1. Still showing the same PRL. Tried disabling all data and trying again. Still no go.

Any ideas?

1brainsurgeon · Mar 11, 2013 at 2:56 AM

Re: [MOD][MA4/MA6] PRL Write Enabler & ##DEBUG# lock code removal

Tsudeily said:
Not having luck with this on MB1. Still showing the same PRL. Tried disabling all data and trying again. Still no go.

Any ideas?

Make sure to update your prl before writing a new one. It may take several attempts before sticking.

digiblur · Mar 11, 2013 at 7:35 PM

Re: [MOD][MA4/MA6] PRL Write Enabler & ##DEBUG# lock code removal

Tsudeily said:
Not having luck with this on MB1. Still showing the same PRL. Tried disabling all data and trying again. Still no go.

Any ideas?

I had to load a PRL the other day and it took me 8 times or so in a row. That function is buggy buggy.

Sent from my little Note2

ralphkaz · Nov 9, 2008 70 4 0

any chance we can get a "non-buggy" version of this for MB1?

digiblur · Mar 15, 2013 at 4:54 PM

Re: [MOD][MA4/MA6] PRL Write Enabler & ##DEBUG# lock code removal

ralphkaz said:
any chance we can get a "non-buggy" version of this for MB1?

What's buggy about the option showing up now?

Sent from my little Note2

ralphkaz · Mar 15, 2013

digiblur said:
What's buggy about the option showing up now?

Sent from my little Note2

Haven't tried it yet myself. I was actually going off your previous post that said it took 8 times to get it to work!

Update: I went ahead and tried it. PRL Write is now showing up in the menu. Tried to write the verizon (001) prl 4 times and it wouldn't stick. Not sure whats going on but on the previous firmware it worked the 1st time every time...

oohoy · Mar 15, 2013

+1 here that MA6 worked on my mb1 rom on s3.

tks all

ralphkaz · Nov 9, 2008 70 4 0

oohoy said:
+1 here that MA6 worked on my mb1 rom on s3.

tks all

did you actually try changing the PRL? The fix worked for me as well (to show the menu item again) - but it won't write the PRL....

oohoy · Jan 6, 2010 291 32 0

ralphkaz said:
did you actually try changing the PRL? The fix worked for me as well (to show the menu item again) - but it won't write the PRL....

yea i been trying out 00001 , 01337 prl. im gettin so much faster data speed than my sprint.... actually dl 500k and ul 600 to 800kb... its not that fast but it beats hella 100k or less from sprint, lol

make sure u do the followings before write prl.... either update prl once from system update then proceed to prl write. or turn off wifi and data off before u proceed to prl write

u can then verify the result by going back to about and see if ur prl # has been changed.

ralphkaz · Nov 9, 2008 70 4 0

oohoy said:
yea i been trying out 00001 , 01337 prl. im gettin so much faster data speed than my sprint.... actually dl 500k and ul 600 to 800kb... its not that fast but it beats hella 100k or less from sprint, lol

make sure u do the followings before write prl.... either update prl once from system update then proceed to prl write. or turn off wifi and data off before u proceed to prl write

u can then verify the result by going back to about and see if ur prl # has been changed.

thanks. seems like turning off the wifi/data did the trick. after turning those off the prl (0001) wrote the first time. This is strange cause on the previous ROMs I didn't have to do this... oh well, at least its working again!

oohoy · Jan 6, 2010 291 32 0

ralphkaz said:
thanks. seems like turning off the wifi/data did the trick. after turning those off the prl (0001) wrote the first time. This is strange cause on the previous ROMs I didn't have to do this... oh well, at least its working again!

i know...alot of these stuff are YMMV. i didnt even know this thread existed and was searching for ways to get msl, anycut, verizon prl from all kinds of sources and picked up bit of info here and there and finally made it to this thread and it just worked.

hot damm. i just got upload speed of 1mb off 01337. suck that sprint! lol

ralphkaz · Mar 18, 2013

oohoy said:
i know...alot of these stuff are YMMV. i didnt even know this thread existed and was searching for ways to get msl, anycut, verizon prl from all kinds of sources and picked up bit of info here and there and finally made it to this thread and it just worked.

hot damm. i just got upload speed of 1mb off 01337. suck that sprint! lol

be careful to stay under 300MB/month on that verizon PRL or sprint might boot you (unless that is what you want!)

oohoy · Jan 6, 2010 291 32 0

ralphkaz said:
be careful to stay under 300MB/month on that verizon PRL or sprint might boot you (unless that is what you want! - its ETF free!)

roger that

digiblur · Mar 22, 2013 at 5:37 PM

Updated with MB1 APK even though the other one was reported as working. Could someone please test this one to make sure it works? I do not have an S3 to test this on so I have to work in the blind. As always...nandroid backup first.

Please try dialing ##DEBUG# too and make sure the code prompt doesn't come up. Thanks.

zuzonline · Feb 17, 2011 52 12 0

RegnierD said:
It's also dicking over the company in a massive transition time for them. Keep screwing with them and they'll cancel your line.

Personally, I think changing your PRL to the roaming one is just blackhearted. You are literally cheating. Rooting and roming your phone is one thing. Raping your carrier because you don't think you have good enough data speeds is another. If you want to be on Verizon's network so badly, then switch over. Don't screw Sprint over, especially when you knew what you were getting into switching to the Never Now Network.

Tapatalked from my GSIII

I couldn't agree more! :good:

dcharleyultra · Mar 23, 2013 at 2:58 AM

Re: [MOD][MA4/MA6/MB1] PRL Write Enabler & ##DEBUG# prompt removal

digiblur said:
Updated with MB1 APK even though the other one was reported as working. Could someone please test this one to make sure it works? I do not have an S3 to test this on so I have to work in the blind. As always...nandroid backup first.

Please try dialing ##DEBUG# too and make sure the code prompt doesn't come up. Thanks.

The code prompt doesn't come up.

Swyped from my SPH-L710

1brainsurgeon · Mar 23, 2013

Re: [MOD][MA4/MA6/MB1] PRL Write Enabler & ##DEBUG# prompt removal

zuzonline said:
I couldn't agree more! :good:

[MOD][MA4/MA6/MB1/MK3] PRL Write Enabler & ##DEBUG# prompt removal

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member