• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

Mod | Operation Killjoy™ | All-In-One | dnsmasq | entropy | fast

Search This thread

funkbuqet

Senior Member
can´t confim, all is fine with 8/8/15 experimental

AND ABOUT INIT.D SUPPORT:
some developers of a ROM create init.d support, but only for the init.d folder, not the scripts inside.
This is an error in chargemon file.
So you get the message "init.d support" but you don´t have it ;)
And for that OKJ does NOT work
Is this something we can fix or does it need to be compiled into the ROM?
 

Exit_Only

Senior Member
Jul 15, 2012
4,741
9,318
Mercer, PA
can´t confim, all is fine with 8/8/15 experimental

AND ABOUT INIT.D SUPPORT:
some developers of a ROM create init.d support, but only for the init.d folder, not the scripts inside.
This is an error in chargemon file.
So you get the message "init.d support" but you don´t have it ;)
And for that OKJ does NOT work

You got it ;)

I'm working on a work around for this issue. Next experimental will have the workaround. Until then....

Open terminal and type:

Code:
su
busybox run-parts /system/etc/init.d

Ignore the errors.
 

Megaflop666

Senior Member
May 17, 2014
3,499
2,538
Insanity
can´t confim, all is fine with 8/8/15 experimental

AND ABOUT INIT.D SUPPORT:
some developers of a ROM create init.d support, but only for the init.d folder, not the scripts inside.
This is an error in chargemon file.
So you get the message "init.d support" but you don´t have it ;)
And for that OKJ does NOT work
As was stated in my earlier post, previous versions of okj were working perfectly with this same ROM and kernel; it's the latest experimental that is giving the issue for me.
 

tprophit

Senior Member
Dec 20, 2010
740
117
Yes, everyone does

SKNur2l.jpg

I'm still on S3, kitkat. Just getting caught up here.
Do kitkat users need to flash pie patch? On last version of Carbon ROM.
Thanks.

Sent from my SCH-I535 using XDA Free mobile app
 

tprophit

Senior Member
Dec 20, 2010
740
117
Welcome back EO!

Just flashed latest stable. First time, phone locked up after activating DNSmasq. Restored, reflashed, turned entro on, (hv1), boost, cleanup, and zealot. Did not activate dnsmasq.

Ran killjoy, see attached; build prop tweaks didn't take?

Suggestions appreciated.

Thank you.

Sent from my SCH-I535 using XDA Free mobile app

---------- Post added at 04:11 PM ---------- Previous post was at 04:07 PM ----------

Apparently I can't attach photos.
Says init.d support activated, build. prop modifications deactivated....

Help?

Thanks.

Sent from my SCH-I535 using XDA Free mobile app
 

Exit_Only

Senior Member
Jul 15, 2012
4,741
9,318
Mercer, PA
Welcome back EO!

Just flashed latest stable. First time, phone locked up after activating DNSmasq. Restored, reflashed, turned entro on, (hv1), boost, cleanup, and zealot. Did not activate dnsmasq.

Ran killjoy, see attached; build prop tweaks didn't take?

Suggestions appreciated.

Thank you.

Sent from my SCH-I535 using XDA Free mobile app

---------- Post added at 04:11 PM ---------- Previous post was at 04:07 PM ----------

Apparently I can't attach photos.
Says init.d support activated, build. prop modifications deactivated....

Help?

Thanks.

Sent from my SCH-I535 using XDA Free mobile app

Fix is already in the works:
 

Attachments

  • 1439329302100.jpg
    1439329302100.jpg
    52.1 KB · Views: 506

Titchener17

Senior Member
Jul 17, 2013
672
438
Raleigh
few pages back EO gave temp solution it wrx like a champ in terminal type su busybox run-parts /system/etc/init.d
i think?

OKJ ROCKS ROLLS BLUES FUNKS AND SOULS !

---------- Post added at 08:20 PM ---------- Previous post was at 08:14 PM ----------

Welcome back EO!

Just flashed latest stable. First time, phone locked up after activating DNSmasq. Restored, reflashed, turned entro on, (hv1), boost, cleanup, and zealot. Did not activate dnsmasq.

Ran killjoy, see attached; build prop tweaks didn't take?

Suggestions appreciated.

Thank you.

Sent from my SCH-I535 using XDA Free mobile app

---------- Post added at 04:11 PM ---------- Previous post was at 04:07 PM ----------

Apparently I can't attach photos.
Says init.d support activated, build. prop modifications deactivated....

Help?

Thanks.

Sent from my SCH-I535 using XDA Free mobile app

see post above in meantime if wanna meant to quote u mea culpa
 
  • Like
Reactions: tprophit and kevp75

ferrari35

Senior Member
Jun 9, 2011
131
8
Not sure if I'm doing something wrong but there is no pie fix in the folder (I'm on the stable version) I'm on lollipop note 4 and running cm 5.1.1
 

almony8

Senior Member
Dec 6, 2010
910
227
I'm running a tw ROM on my note 3 but using dualboot to run blisspop as a secondary ROM. How would I go about flashing killjoy without messing everything up now? Any thoughts or suggestions?

Sent from my Note 3 using XDA Free mobile app
 

Top Liked Posts

  • There are no posts matching your filters.
  • 417
    7unu7y2y.jpg

    OPERATION KILLJOY™

    S & A TECHNOLOGY™ PRESENTS...

    Operation Killjoy™ This tweak package takes your android device to a whole new level of awesomeness. Big thanks to all the developers involved.

    THIS TWEAK PACKAGE IS 100% UNIVERSAL ON ALL DEVICES RUNNING ANDROID 2.3 Gingerbread OR HIGHER!!!


    CREDITS:
    @malybru (for the awesome banner)
    @LENAROX(For all your recommendations)
    @Koush(For being an awesome coder)
    @CyanogenMod(Do I need to say why)
    @zeppelinrox(Awesome scripter, most scripts on xda is because of your genius)
    @Chainfire(Amazing app and script developer)
    @ImbaWind(ICS ram flush boost script)
    @RErick(Team k)
    @decialman(Team k)
    @castle_bravo(Team k)

    Honorable mentions: @slaid480 (Just in case something matches) @paget86 (He's a great dude) @darky (Zipalign original developer)

    Any one else? If I forgot you please pm me and it will be fixed ASAP!!!

    General Q & A Section:

    Q.)How can I tell if this is actually working or not?

    A.)Open Terminal Emulator and type this command...
    Code:
    su
    killjoy

    Q.)Help!!! Why is my phone bootlooping?

    A.)I need more detailed information like what device you have, what version of android are you on, what recovery are you using? Better yet please get me a full adb boot logcat as well.

    Q.)Build.prop tweaks did not inject!!! Why?

    A.)You don't have init.d support!!!

    Q.)But my kernel supports init.d so why is my buildprop not getting injected?

    A.)Well obviously you don't have init.d support cause if you did the build.prop would have been injected.

    Q.)How can I test to see if I have init.d support?

    A.)Look in /data/killjoy and open the log files, if it says "YOU DO NOT HAVE INIT.D SUPPORT" then that will answer your question!

    Standard Disclaimer: Flash at your own risk. If your phone blows up after flashing this and you point the finger at me I will laugh at you! Neither myself or S & A Technology will be liable for your expensive paper weight!

    GENERAL WARNING: Do NOT I repeat DO NOT use ANY other tweaks with this package. If you choose to do so after reading this you do so AT YOUR OWN RISK. If you ask bout other tweaks in my thread YOU WILL BE IGNORED.

    WHAT IS NEEDED:
    1.) Root access (su binary required)
    2.) Need to be on Android 2.3 or higher
    3.) Terminal Emulator app
    4.) Enough space in your /system partition (11 mb available minimum)
    If you do not meet these requirements then DO NOT USE IT!!!
    5.) No other mods installed including Xposed framework
    6.) Well versed in flashing and handling basic Linux scripts

    a6yjase5.jpg

    1.) Make sure you meet the requirements above
    2.) Download the latest version of Operation Killjoy™
    3.) Boot into recovery (All recoveries supported)
    4.) Make a nandroid backup (Please do NOT complain to me that you lost your data after bootlooping and you didn't make a backup)
    5.) Flash inside custom recovery
    6.) Reboot...
    7.) Profit...????

    ABOUT THE TWEAKS:
    1.) Multiple init.d script w/ built in logging of script activities located in /data/killjoy
    2.) Entropy Generator via either 3 different rngd binaries or 2 different haveged binaries
    Turn on entropy...
    Code:
    su
    entro_on
    Then pick your poison :)
    Turn off entropy...
    Code:
    su
    entro_off
    Check available entropy levels type (YOU MUST HAVE ACTIVATED ENTROPY RESTORE BEFORE ATTEMPTING THIS)
    Code:
    su
    entro
    3.) Multiple VM, Kernel, and block modifications (Speed, No lag, Awesome battery life)
    4.) Battery life increases by up to 75% (When using 'boost' binary every few hours)

    Want to setup daily or hourly cleaning of partitions and clearing RAM? Simply type:

    Code:
    su
    zealot

    To turn of zealot simply type:

    Code:
    su
    zealot_off

    5.) Trim the fat off of /data /cache & /system

    Code:
    su
    cleanup

    This also runs on reboot so only do it if you haven't rebooted in a while.

    6.) Calibrates your battery automatically and backup the old battery stats in case of calibration error (init.d script)

    7.) Browser cache removed on each reboot and startup (init.d support)

    8.) SuperSU is the REQUIRED Superuser application for Operation Killjoy™ (Fixes mounting issues)

    9.) RAM booster binary (Recover lost ram on the go without rebooting)

    Choose between light, moderate and aggressive ram boost...

    Code:
    su
    boost

    10.) Killjoy™ Binary (Exit_Only Exclusive) (Check to make sure mod installed correctly)

    Type this command in Terminal Emulator:

    Code:
    su
    killjoy

    11.) CpuControl script that is 100% user tweaked via "cputuner" binary

    To activate simply type in Terminal Emulator:

    WARNING: If you are running ANY overclock apps then cputuner IS NOT for you!!!

    Code:
    su
    cputuner

    WARNING: If you are running ANY overclock apps then cputuner IS NOT for you!!!

    12.) Zealot binary for timing of script execution (Choose hourly or daily script execution via my executive zealot binary)

    Simply type in Terminal Emulator:

    Code:
    su
    zealot

    To turn zealot off simply type in Terminal Emulator:

    Code:
    su
    zealot_off

    13.) Set selinux status from ENFORCING to PERMISSIVE plus reboot survival.
    Also sets default.prop from "0" or "1" and back again!

    Simply type in Terminal Emulator:

    Code:
    su
    selinux

    tu8uvede.jpg


    ALL CHANGELOG INFO CAN NOW BE FOUND BY INSTALLING THE NEWEST VERSION OF OKJ AND TYPING

    Code:
    su
    changelog

    ynu5useb.jpg


    OFFICIAL RELEASE FOLDER
    DISCONTINUED!!!

    ABOUT EXPERIMENTAL RELEASES - These releases should be stable enough for daily use, may or may not contain errors.

    EXPERIMENTAL RELEASE FOLDER | Check Daily/Nightly: (Not always everyday)

    DISCONTINUED!!!

    OPERATION KILLJOY HAS BEEN OFFICIALLY DISCONTINUED DUE TO HORRIBLE DOWNLOAD NUMBERS! I DO NOT ASK FOR DONATIONS SO THE DOWNLOAD COUNT WAS MY MOTIVATOR! OPERATION KILLJOY WAS ONLY DOWNLOADED 479 TIMES FROM 09/04/2015 AND 09/21/2015. IN 2013, OKJ WAS DOWNLOADED 1,500 TIMES DAILY! I WANTED TO COME BACK WITH A BANG BUT BECAUSE OF OTHER DEVELOPERS USING OPERATION KILLJOY FRAMEWORK AND STRUCTURE WHILE I WAS GONE FROM XDA, THEY ENDED UP WITH MY DOWNLOADS AND I COULD NOT RECOVER! I WAS THE LAST ACTUAL LINUX DEVELOPER WHO WAS RELEASING BLEEDING EDGE MODIFICATIONS! THAT IS NO LONGER THE CASE DUE TO THIS! GOOD LUCK TO EVERYONE!
    65
    How to uninstall killjoy!!!

    1.) Open terminal emulator
    2.) Type these commands
    Code:
    su
    uninstall
    3.) Reboot your device
    4.) Killjoy is gone
    49
    NEW STABLE RELEASE FOR 12/12/13

    Fixed dnsmasq off no boot bug
    Updated sqlite for 4.4+ kitkat compatibility
    Fixed sqlite script not running in recovery
    Adjusted values to 4.4+ compatibility
    Updated copyright to 2014
    Few other bug fixes and improvements over 10/27/13 build

    Download: http://www.mediafire.com/?ya5fb112futbkvf

    Sorry for the months delay. Life has been PURE CRAZY!!!

    Sent from my Nexus 4 using Tapatalk
    41
    36
    I'm working on an update to this! I will be renaming this mod to something more mainstream! I've already started updating each binary source code and what not! I've officially have my associates in computer science so I'm going to put my piece of paper to good use.

    Sent from my XT1058 using XDA-Developers mobile app