[MOD] [Stratos/Pace][v3.2] AmazBoost™ Speed up your Watch!

Search This thread

AmazDev

Senior Member
Sep 23, 2018
83
92
21
Taranto
Samsung Galaxy S22 Ultra


Code:
:::'###::::'##::::'##::::'###::::'########:'########:::'#######:::'#######:::'######::'########:
::'## ##::: ###::'###:::'## ##:::..... ##:: ##.... ##:'##.... ##:'##.... ##:'##... ##:... ##..::
:'##:. ##:: ####'####::'##:. ##:::::: ##::: ##:::: ##: ##:::: ##: ##:::: ##: ##:::..::::: ##::::
'##:::. ##: ## ### ##:'##:::. ##:::: ##:::: ########:: ##:::: ##: ##:::: ##:. ######::::: ##::::
 #########: ##. #: ##: #########::: ##::::: ##.... ##: ##:::: ##: ##:::: ##::..... ##:::: ##::::
 ##.... ##: ##:.:: ##: ##.... ##:: ##:::::: ##:::: ##: ##:::: ##: ##:::: ##:'##::: ##:::: ##::::
 ##:::: ##: ##:::: ##: ##:::: ##: ########: ########::. #######::. #######::. ######::::: ##::::
..:::::..::..:::::..::..:::::..::........::........::::.......::::.......::::......::::::..:::::

Make your watch lightning fast! ⚡


What is AmazBoost?
To begin, hi all guys! It's been a long time since i don't post on this forum!
AmazBoost™ was born from my own necessity to get a faster and lag-free watch since i guess that every possessor of AmazFit watches sometimes complained about performaces. Mostly of te time the watch is fast enough to let us do everything in a good way, but expecially with roms and other extra features enabled while navigating the smartwatch some lags or small freezes may occur.
So what i've tought is: This watch is running a modified version of Android 4.4 kitkat this means that with right build.prop and init.d tweaks performances may benefit! And why not battery life too! So i've tested myself all the tweaks i founf in one of my old rom projects and i found out the best combinations between battery and performances!


Features of AmazBoost™
- Battery tweaks to improve SmartWatch battery life!
- Kernel Tweaks to improve kernel performance
- RAM tweaks for smarter RAM management
- Scrolling tweaks for smoother scrolling
- EXT4 tweaks for better filesystem perfomance
- Entropy tweaks for a SUPER smooth and fast experience
- IO Tweaks for improved EMMC perfomance
- Dalvik VM Tweaks for better system performance
- Clean smartwatch junk at every boot
- Misc performance tweaks for overall better watch navigation
- Faster screen raise to wake up
- Disabled logcat to improve battery life



What you need
- AmazFit Stratos/Pace
- Permanently rooted ROM
- init.d support
( if you don't have it use my MOD to enable it! goo.gl/2tVQFW )



How to install/Remove
1) Download the mod zip from download link and unzip it
2) Connect he wath to the PC
3) Run the installer.bat file to install the mod or Remover.bat to remove it
4) Done!
5) You NEED to reinstall the mod running the installer after every ROM update!



Changelog

Version 3.2
- SUPER smootheness and screen resposiveness like never before using Android entropy tweaks!
- Removed 3D tweaks: We have a very weak GPU and any modifications made for its configs makes UI more laggy
- Improved scrolling tweaks to reduce lags
- Improved VM tweaks
- Improved kenrnel tweaks

Version 3.1:
- Fixed ALL lags got from latest v3.1 tweaks (i'm sorry guys lol)
- Improved Overal UI smotheness
- Improved tweaks with 512MB RAM values
- Improved VM tweaks for beter perfomance and reduced battery consumption
- Got back and fixed EXT4 tweaks! So enjoy now the best filesystem perfomance of your smartwatch!
- Improved IO tweaks, to reduce the overhead and improve battery consumption

Version 3.0:
- Added new super smooth scrolling algorithm, follows perfectly your finger!
- Improved system animations speed and fixed some lags in notification pannel
- Added super RAM Low Meomry Killer algorithm for better extra app management
- Fixed and improved IO tweaks, now makes your watch even faster!

Version v2.1:
- Added Memory RW turbo speed! best memory speed ever for a faster watch!
- Fixed overally some lag issues got with last v2.0 update

Version v2.0:
- Added Misc performance tweaks for overall better watch navigation
- 2x faster scroll speed for faster animations and smoother scrolling
- Renice system at every boot
- New VM tweaks
- Disabed kernel logging to improve performances
- Improved RAM management system for better custom apk experience
- Clean smartwatch junk memory files at every boot
- Faster screen raise to wake up
- Added busybox applet for better tweaks enabling

Version V1.1:
- Improved Dalvik VM tweaks
- Improved UI smootheness
- Added new 3D tweaks



Download and enjoy!
goo.gl/asPtmN






If my work was useful always press thanks!
 
Last edited:

E_g_o_r

Member
Jan 26, 2016
7
1
Code:
mount: Operation not permitted
mkdir failed for /system/AmazBoost/, Read-only file system
adb: error: failed to copy 'logcat_tweaks' to '/system/etc/init.d/': remote Is a directory
logcat_tweaks: 0 files pushed. 0.1 MB/s (1869 bytes in 0.013s)
adb: error: failed to copy 'CSZ_tweaks' to '/system/etc/init.d/': remote Is a directory
CSZ_tweaks: 0 files pushed. 1.1 MB/s (2766 bytes in 0.003s)
adb: error: failed to copy 'EXT4_tweaks' to '/system/etc/init.d/': remote Is a directory
EXT4_tweaks: 0 files pushed. 0.5 MB/s (1414 bytes in 0.003s)
adb: error: failed to copy 'VM_tweaks' to '/system/etc/init.d/': remote Is a directory
VM_tweaks: 0 files pushed. 0.9 MB/s (2372 bytes in 0.003s)
adb: error: failed to copy 'Battery_tweaks' to '/system/etc/init.d/': remote Is a directory
Battery_tweaks: 0 files pushed. 0.8 MB/s (2174 bytes in 0.003s)
adb: error: failed to copy '85kernel_tweaks' to '/system/etc/init.d/': remote Is a directory
85kernel_tweaks: 0 files pushed. 0.9 MB/s (2388 bytes in 0.003s)
adb: error: failed to copy 'IO_tweaks' to '/system/etc/init.d/': remote Is a directory
IO_tweaks: 0 files pushed. 0.9 MB/s (2448 bytes in 0.003s)
adb: error: failed to copy '3D_tweaks' to '/system/etc/init.d/': remote Is a directory
3D_tweaks: 0 files pushed. 0.4 MB/s (2102 bytes in 0.005s)
There is an error during install
Firmware 2.8.1.0, there is no init.d on my watch initially
 
Last edited:

AmazDev

Senior Member
Sep 23, 2018
83
92
21
Taranto
Samsung Galaxy S22 Ultra
Code:
mount: Operation not permitted
mkdir failed for /system/AmazBoost/, Read-only file system
adb: error: failed to copy 'logcat_tweaks' to '/system/etc/init.d/': remote Is a directory
logcat_tweaks: 0 files pushed. 0.1 MB/s (1869 bytes in 0.013s)
adb: error: failed to copy 'CSZ_tweaks' to '/system/etc/init.d/': remote Is a directory
CSZ_tweaks: 0 files pushed. 1.1 MB/s (2766 bytes in 0.003s)
adb: error: failed to copy 'EXT4_tweaks' to '/system/etc/init.d/': remote Is a directory
EXT4_tweaks: 0 files pushed. 0.5 MB/s (1414 bytes in 0.003s)
adb: error: failed to copy 'VM_tweaks' to '/system/etc/init.d/': remote Is a directory
VM_tweaks: 0 files pushed. 0.9 MB/s (2372 bytes in 0.003s)
adb: error: failed to copy 'Battery_tweaks' to '/system/etc/init.d/': remote Is a directory
Battery_tweaks: 0 files pushed. 0.8 MB/s (2174 bytes in 0.003s)
adb: error: failed to copy '85kernel_tweaks' to '/system/etc/init.d/': remote Is a directory
85kernel_tweaks: 0 files pushed. 0.9 MB/s (2388 bytes in 0.003s)
adb: error: failed to copy 'IO_tweaks' to '/system/etc/init.d/': remote Is a directory
IO_tweaks: 0 files pushed. 0.9 MB/s (2448 bytes in 0.003s)
adb: error: failed to copy '3D_tweaks' to '/system/etc/init.d/': remote Is a directory
3D_tweaks: 0 files pushed. 0.4 MB/s (2102 bytes in 0.005s)
There is an error during install
Firmware 2.8.1.0, there is no init.d on my watch initially
Your system is not rooted! adb root failed actually.....
 

AmazDev

Senior Member
Sep 23, 2018
83
92
21
Taranto
Samsung Galaxy S22 Ultra
New version v2.0 released

New Version v2.0 uploaded with ton of improvemets!

Version v2.0:
- Added Misc performance tweaks for overall better watch navigation
- 2x faster scroll speed for faster animations and smoother scrolling
- Renice system at every boot
- New VM tweaks
- Disabed kernel logging to improve performances
- Improved RAM management system for better custom apk experience
- Clean smartwatch junk memory files at every boot
- Faster screen raise to wake up
- Added busybox applet for better tweaks enabling
 
  • Like
Reactions: somemadcaaant

nhedgehog

Senior Member
Oct 21, 2009
90
19
Thanks for your effort.
I didn't install it till now but have some remarks:

1) AmazBoost_remover.bat has a typo:
adb shell rm -f /system/etc/init.d/Battey_tweaks
should be:
adb shell rm -f /system/etc/init.d/Battery_tweaks

2) Some changes are made in the build.prop. Those changes are permanent I guess. Why do you have them started each time the device boots?
 

AmazDev

Senior Member
Sep 23, 2018
83
92
21
Taranto
Samsung Galaxy S22 Ultra
Thanks for your effort.
I didn't install it till now but have some remarks:

1) AmazBoost_remover.bat has a typo:
adb shell rm -f /system/etc/init.d/Battey_tweaks
should be:
adb shell rm -f /system/etc/init.d/Battery_tweaks

2) Some changes are made in the build.prop. Those changes are permanent I guess. Why do you have them started each time the device boots?

If I write with echo command directly on the build.prop file in Smartwatch system, to remove the mod you must reflash your rom or download rom. Zip extract build.prop file and replace it inside the watch, a very long and not user friendly process to do. If i use setprop command, instead, those line are activated at every boot and have the same efficiency as the permanent build.prop modifications but it's enough to run my remover.bat to completely remove the mod and clean your ROM from my modifications.
 
Last edited:

E_g_o_r

Member
Jan 26, 2016
7
1
Your system is not rooted! adb root failed actually.....

Code:
- Waiting for device...

- Waiting for root...

- Installing AmazBoost...

adb: error: failed to copy 'logcat_tweaks' to '/system/etc/init.d/': remote Is a directory
logcat_tweaks: 0 files pushed. 0.6 MB/s (1909 bytes in 0.003s)
adb: error: failed to copy 'CSZ_tweaks' to '/system/etc/init.d/': remote Is a directory
CSZ_tweaks: 0 files pushed. 0.7 MB/s (2337 bytes in 0.003s)
adb: error: failed to copy 'EXT4_tweaks' to '/system/etc/init.d/': remote Is a directory
EXT4_tweaks: 0 files pushed. 0.5 MB/s (1430 bytes in 0.003s)
adb: error: failed to copy 'VM_tweaks' to '/system/etc/init.d/': remote Is a directory
VM_tweaks: 0 files pushed. 0.8 MB/s (3214 bytes in 0.004s)
adb: error: failed to copy 'Battery_tweaks' to '/system/etc/init.d/': remote Is a directory
Battery_tweaks: 0 files pushed. 0.5 MB/s (2122 bytes in 0.004s)
adb: error: failed to copy '85kernel_tweaks' to '/system/etc/init.d/': remote Is a directory
85kernel_tweaks: 0 files pushed. 0.6 MB/s (2444 bytes in 0.004s)
adb: error: failed to copy 'IO_tweaks' to '/system/etc/init.d/': remote Is a directory
IO_tweaks: 0 files pushed. 1.7 MB/s (5265 bytes in 0.003s)
adb: error: failed to copy '3D_tweaks' to '/system/etc/init.d/': remote Is a directory
3D_tweaks: 0 files pushed. 0.7 MB/s (2122 bytes in 0.003s)
adb: error: failed to copy 'Cleaner_tweaks' to '/system/etc/init.d/': remote Is a directory
Cleaner_tweaks: 0 files pushed. 0.8 MB/s (1691 bytes in 0.002s)
adb: error: failed to copy 'Performance_tweaks' to '/system/etc/init.d/': remote Is a directory
Performance_tweaks: 0 files pushed. 0.8 MB/s (1644 bytes in 0.002s)
adb: error: failed to copy 'Renice_tweaks' to '/system/etc/init.d/': remote Is a directory
Renice_tweaks: 0 files pushed. 0.8 MB/s (3203 bytes in 0.004s)
busybox: 1 file pushed. 1.9 MB/s (1320860 bytes in 0.664s)

- Setting permissions...

Unable to chmod /system/etc/init.d/*: No such file or directory
- Rebooting...

AmazBoost installed! Press any key to exit...
With temp root on 2.8.1.0 firmware - no init.d dir. What firmware do u use?
 

Top Liked Posts

  • There are no posts matching your filters.
  • 43


    Code:
    :::'###::::'##::::'##::::'###::::'########:'########:::'#######:::'#######:::'######::'########:
    ::'## ##::: ###::'###:::'## ##:::..... ##:: ##.... ##:'##.... ##:'##.... ##:'##... ##:... ##..::
    :'##:. ##:: ####'####::'##:. ##:::::: ##::: ##:::: ##: ##:::: ##: ##:::: ##: ##:::..::::: ##::::
    '##:::. ##: ## ### ##:'##:::. ##:::: ##:::: ########:: ##:::: ##: ##:::: ##:. ######::::: ##::::
     #########: ##. #: ##: #########::: ##::::: ##.... ##: ##:::: ##: ##:::: ##::..... ##:::: ##::::
     ##.... ##: ##:.:: ##: ##.... ##:: ##:::::: ##:::: ##: ##:::: ##: ##:::: ##:'##::: ##:::: ##::::
     ##:::: ##: ##:::: ##: ##:::: ##: ########: ########::. #######::. #######::. ######::::: ##::::
    ..:::::..::..:::::..::..:::::..::........::........::::.......::::.......::::......::::::..:::::

    Make your watch lightning fast! ⚡


    What is AmazBoost?
    To begin, hi all guys! It's been a long time since i don't post on this forum!
    AmazBoost™ was born from my own necessity to get a faster and lag-free watch since i guess that every possessor of AmazFit watches sometimes complained about performaces. Mostly of te time the watch is fast enough to let us do everything in a good way, but expecially with roms and other extra features enabled while navigating the smartwatch some lags or small freezes may occur.
    So what i've tought is: This watch is running a modified version of Android 4.4 kitkat this means that with right build.prop and init.d tweaks performances may benefit! And why not battery life too! So i've tested myself all the tweaks i founf in one of my old rom projects and i found out the best combinations between battery and performances!


    Features of AmazBoost™
    - Battery tweaks to improve SmartWatch battery life!
    - Kernel Tweaks to improve kernel performance
    - RAM tweaks for smarter RAM management
    - Scrolling tweaks for smoother scrolling
    - EXT4 tweaks for better filesystem perfomance
    - Entropy tweaks for a SUPER smooth and fast experience
    - IO Tweaks for improved EMMC perfomance
    - Dalvik VM Tweaks for better system performance
    - Clean smartwatch junk at every boot
    - Misc performance tweaks for overall better watch navigation
    - Faster screen raise to wake up
    - Disabled logcat to improve battery life



    What you need
    - AmazFit Stratos/Pace
    - Permanently rooted ROM
    - init.d support
    ( if you don't have it use my MOD to enable it! goo.gl/2tVQFW )



    How to install/Remove
    1) Download the mod zip from download link and unzip it
    2) Connect he wath to the PC
    3) Run the installer.bat file to install the mod or Remover.bat to remove it
    4) Done!
    5) You NEED to reinstall the mod running the installer after every ROM update!



    Changelog

    Version 3.2
    - SUPER smootheness and screen resposiveness like never before using Android entropy tweaks!
    - Removed 3D tweaks: We have a very weak GPU and any modifications made for its configs makes UI more laggy
    - Improved scrolling tweaks to reduce lags
    - Improved VM tweaks
    - Improved kenrnel tweaks

    Version 3.1:
    - Fixed ALL lags got from latest v3.1 tweaks (i'm sorry guys lol)
    - Improved Overal UI smotheness
    - Improved tweaks with 512MB RAM values
    - Improved VM tweaks for beter perfomance and reduced battery consumption
    - Got back and fixed EXT4 tweaks! So enjoy now the best filesystem perfomance of your smartwatch!
    - Improved IO tweaks, to reduce the overhead and improve battery consumption

    Version 3.0:
    - Added new super smooth scrolling algorithm, follows perfectly your finger!
    - Improved system animations speed and fixed some lags in notification pannel
    - Added super RAM Low Meomry Killer algorithm for better extra app management
    - Fixed and improved IO tweaks, now makes your watch even faster!

    Version v2.1:
    - Added Memory RW turbo speed! best memory speed ever for a faster watch!
    - Fixed overally some lag issues got with last v2.0 update

    Version v2.0:
    - Added Misc performance tweaks for overall better watch navigation
    - 2x faster scroll speed for faster animations and smoother scrolling
    - Renice system at every boot
    - New VM tweaks
    - Disabed kernel logging to improve performances
    - Improved RAM management system for better custom apk experience
    - Clean smartwatch junk memory files at every boot
    - Faster screen raise to wake up
    - Added busybox applet for better tweaks enabling

    Version V1.1:
    - Improved Dalvik VM tweaks
    - Improved UI smootheness
    - Added new 3D tweaks



    Download and enjoy!
    goo.gl/asPtmN






    If my work was useful always press thanks!
    8
    Hey guys!

    I've been working all the day to find out why the watch stil seems a bit laggy and i've found and fixed all tweaks!
    So here you go my latest v3.1 released!

    Version 3.1:
    - Fixed ALL lags got from latest v3.1 tweaks (i'm sorry guys lol)
    - Improved Overal UI smotheness
    - Improved tweaks with 512MB RAM values
    - Improved VM tweaks for beter perfomance and reduced battery consumption
    - Got back and fixed EXT4 tweaks! So enjoy now the best filesystem perfomance of your smartwatch!
    - Improved IO tweaks, to reduce the overhead and improve battery consumption

    enjoy!
    7
    New Version 3.0 released guys! including the new following faetures:
    - Added new super smooth scrolling algorithm, follows perfectly your finger!
    - Improved system animations speed and fixed some lags in notification pannel
    - Added super RAM Low Meomry Killer algorithm for better extra app management
    - Fixed and improved IO tweaks, now makes your watch even faster!

    Enjoy!!
    5
    V3.2 released!



    One of my BEST releases EVER! I think every performance issue of this smartwatch (in certain hardware liits) have been fixed!
    Enjoy version 3.2!
    - SUPER smootheness and screen resposiveness like never before using Android entropy tweaks!
    - Removed 3D tweaks: We have a very weak GPU and any modifications made for its configs makes UI more laggy
    - Improved scrolling tweaks to reduce lags
    - Improved VM tweaks
    - Improved kenrnel tweaks

    4
    How to flash AmazBoost mod on stock rom.
    Model: Stratos
    Stock ROM version: 2.3.5.0
    Requirement: Unlocked Bootloader

    ***Hey! I may have made some mistake in the commands below! Be extra careful before you try this, I don't want to cause any bricks and am no responsible if something goes wrong!***

    1. Download the AmazBoost zip and extract it.
    2. Connect the watch to your pc.
    3. Copy:
    2a. the tweak files in a folder inside the internal storage. Let's say it is: /sdcard/tweaks/​
    2b. the busybox file in a folder inside the internal storage. Let's say it is: /sdcard/busybox/​
    4. Open a terminal and write:
    adb devices
    #to check that the adb connection is ok
    adb shell reboot bootloader
    #to reboot to the bootloader
    fastboot devices
    #to check that the fastboot connection is ok
    #Now boot the temproot kernel
    fastboot boot temproot_kernel.img
    #It may sound like a disconnect and reconnect in Windows, but the watch will remain on fastboot screen. This is fine.
    adb devices
    adb shell
    #you should see a "#" now, meaning that you have root access.
    mount -o remount,rw /system
    mkdir -p /system/AmazBoost/LOGS/
    cp -r /sdcard/tweaks/* /system/etc/init.d/
    cp -r /sdcard/busybox/* /system/xbin/

    #this should be enough to copy the files. Now to set the permissions.
    chmod -R 0755 /system/AmazBoost
    chmod -R 0755 /system/AmazBoost/LOGS
    chown 0:2000 /system/xbin/busybox
    chmod 0777 /system/etc/init.d/*
    busybox ln -sf busybox "/system/xbin/$i"

    #I think now you are ready. Let's reboot.
    reboot
    #Enjoy! :D