[MOD] Taste Nexus S Gingerbread on Galaxy S v6 - network (unstable) - tech DEMO
- Thread starter supercurio
- Start date
I don't remember. It was different. it wasn't the problem though.
Sent from my SAMSUNG-SGH-I896 using XDA App
Well all the power to them now I will surely donate and support them any way I can. I will hopefully be a Dev in the near future after my engineering degree and will hopefully be able to give back to this great community.
Sent from my SAMSUNG-SGH-I897 using XDA App
Sent from my SAMSUNG-SGH-I897 using XDA App
You don't need a degree to be a dev. Many of the ones here are still in high school
yup they is nerd is all
, just got my sgs a few weeks ago and already go my ideas to make some improvements myself.:O really? Thanks for the facts I didn't know that...<sarcasm>
I didn't start tinkering with computers coming up that's why I am assuming going through software engineering would be a helpful experience to learn alot about Android Development and many more things that can bring back to the community. But thanks for your smart reply nevertheless...
yadda yadda yadda gingerbread who cares.... get me honeycomb.. ;-)
Honeycomb has not been officially released yet. We have a semi working gingerbread port and your complaining that honeycomb isn't here yet?
does anyone know how this performs compared to cyanogenmod7 test build?
is it better or worse, wich one should i install ?
is it better or worse, wich one should i install ?
does anyone know how this performs compared to cyanogenmod7 test build?
is it better or worse, wich one should i install ?
cm7
very smooth
Well guys I had this rom a bit long on my phone, wanted to change back to stock only to find out that my 3 button download mode does not work anymore, and neither will ADB recognize my phone (if i put it on file sharing mode though it'll recognize it as a drive)
this really sucks cause now I can't flash... anything... whenever I try the 3 button download it'll just boot up as usual
any ideas here?
I even went as far as installing superuser and terminal emulator and executing "reboot download", but to no success as it just rebooted the phone in normal mode
thanks in advance all!
EDIT: also did some searching, some people said you should hold down both volume buttons while you re-insert the battery while the phone is connected to your computer... doesn't work either
EDIT #2: nevermind guys, got it.
this really sucks cause now I can't flash... anything... whenever I try the 3 button download it'll just boot up as usual
any ideas here?
I even went as far as installing superuser and terminal emulator and executing "reboot download", but to no success as it just rebooted the phone in normal mode
thanks in advance all!
EDIT: also did some searching, some people said you should hold down both volume buttons while you re-insert the battery while the phone is connected to your computer... doesn't work either
EDIT #2: nevermind guys, got it.
Last edited:
This is really awesome!
Will it be available also for the korean Galaxy S (M110S instead of i9000)?
Samsung keeps the source code on opensource.samsung.com just need to type M110S or any other model.
Will it be available also for the korean Galaxy S (M110S instead of i9000)?
Samsung keeps the source code on opensource.samsung.com just need to type M110S or any other model.
Guys, as awesome as this "experiment" is/was, please use CM7 instead.
This project is dead and can potentially destroy your front cam.
This project is dead and can potentially destroy your front cam.
Similar threads
- Locked
- Poll
- Locked
Top Liked Posts
-
There are no posts matching your filters.
-
362UPDATE statement.
As original author for this thread, videos and first demos, I'm not currently working on the Gingerbread port these days (heavily busy working on Voodoo sound improvements).
It doesn't mean I lost interest in it, only that I miss time at the moment.
CyanogenMod team work on a serious port of Gingerbread for Galaxy S, witch won't be just a technical demo like the original spirit of this one.
Of course, such goal requires a lot of work, dedication, and also some calm.
There is a lot of natural interest about Gingerbread on Galaxy S, and it's perfectly understandable too.
Giving an ETA until the porting work is done or some major advance is made would be dishonest.
It means that not asking for ETA will be appreciated. However, you're welcome discussing other aspects.
If you want more technical insights and a few updates by most actives developers for this port, i would recommend to follow:
http://twitter.com/CMSGSTeam
http://twitter.com/codeworkx
http://twitter.com/dumdidum
[list needs to be completed, thanks for input]
Thank you!
Original post:
Galaxy S with Nexus S kernel - Booting Nexus S Android Gingerbread
Videos are here:
http://www.youtube.com/supercurioxda
Early demo Releases - V6
Requirements
You must be root on your phone
Your /data must be converted in Ext4 by Voodoo lagfix or another Ext4 lagfix.
Verizon Fascinates are not yet supported - Epic4G will require a lot more development.
You must have proceed to complete backups before
Some busybox installation is also useful for tar.
Another Important note
Be sure you have access to the download mode using the 3 buttons combination.
If you don't, it will be extremely difficult (even if in theory not impossible) to to flash another kernel back.
Steps:
1/ Download this system dump on your sdcard:
system dump archive
2/ Run these commands
3/ unzip the attached nsonsgs.tar.zip to nsonsgs.tarCode:adb shell su cd /data mkdir gingerbread cd gingerbread busybox tar zxvf /sdcard/system-dump-as-root.tar.gz busybox cp -a /efs efs sync reboot download
4/ flash the kernel with Odin or Heimdall - no pit - no re-partition
Watch Gingerbread boot on your phone !
How do I get back?
Everything is still in place on your phone - no harm done.
All you need to do is to flash your preferred custom (that support Ext4 obviously) Kernel back on your phone
What's about this port:
- It uses the Nexus S kernel compiled from sources
- It runs the exact /system image release, we dumped on IRC from an actual Nexus S device.
Am i French ?
Now you don't have any doubt anymore
Which filesystem ?
This early preview runs on Ext4. no RFS at all, the kernel don't support RFS.
Does everything work ?
Nope, but there are progresses.
Don't work: GPS / Voice / camera
Work: everything else: like sound, GL acceleration etc
Will it work ?
I think most of it will work after countless hours spent on it.
Is it flashable with Odin ?
Won't be so easy, but it's one of the goals
Do you work alone ?
Credits go the IRC channel #NSdev on freenode, and now a team formed regrouping most Captivate/Vibrant/Fascinate/I9000 developers and CyanogenMod team, with Kernel and ROM developers and also newcomers.
When will this/that work ?
The only honest answer is: there is no answer.
Please don't ask for ETA, don't pressure developers, they need peace of mind
Is this Open Source ?
Everything is fully published under an open source license
Latest initramfs: https://github.com/project-voodoo/nsonsgs-initramfs
Kernels: https://github.com/galaxys-kernel
Who are the actual contributors to the code?
For the kernel, you can follow works here : who / when.
https://github.com/galaxys-kernel/linux_samsung_galaxys_port/commits/galaxys-port
As it is a team work, sometimes it's not the guy who had the idea who commits the code, but still
Articles:
http://www.engadget.com/2010/12/18/samsung-galaxy-s-receives-gingerbread-port-right-from-the-nexus/
http://briefmobile.com/samsung-galaxy-s-android-2-3-gingerbread
And a lot of other ones now!
Versions:
V6
- Easy root. You only need to install Superuser app from Market.
Downloads :
Kernel you can flash with Odin / heimdall / kernel flashing apps
ClockWorkMod unsigned update.zip
V5
- Wifi semi-working (tend to crash the phone on Wifi sleep timeout)
- Calls working but no DATA for me (coolya had data, which means: erratic) - voice not tested.
- kind of laggy, but there is a lot of headroom.
- GPS working only by Wifi/Triangulation networking - No satellites.
Fantastic job by coolya who did most of the advancement, for Wifi, baseband and also OneDRAM partitions configuration. Really really awesome work.
We were so lucky the snow forced him to stay at home instead of going to work
This time you can really start to play with the phone, install apps, surf on the Internet all this with Gingerbread! kind of cool
V4
Buttons fixed thanks to the contributions of xcaliburhands, pawitp, fenfir
No need to create some directories manually anymore.
Kernel available as ClockWorkMod recovery update.zip - be sure you have access to 3 buttons !
V3
SDcard now works
- As internal storage
- As USB storage
V2
improved pre-init script and mounts:
no more insufficient space
improved dual-boot solution
faster boot
faster disk I/O
V1
initial
Edit: we started working now as a team, joining XDA forces with CyanogenMod.
Gingerbread CM is AOSP, which means the port will be the real Google experience, using clean source modified just as we need to.26Here are some Infos and Screens for you!
Code:/dev/block/mtdblock2 on /system type yaffs2 (rw,relatime) /dev/block/mtdblock3 on /cache type yaffs2 (rw,relatime) /dev/block/mmcblk0p2 on /data type ext4 (rw,nosuid,nodev,noatime,nodiratime,barrier=1,data=ordered,noauto_da_alloc) /dev/block/mtdblock6 on /datadata type yaffs2 (rw,relatime) /dev/block/mtdblock4 on /efs type yaffs2 (rw,relatime)
Quadrant Advanced:
CPU: 4725
Memory: 1855
I/O: 914
2D: 309
3D: quadrant fails
Screenshots:
12Currently we're using CM7 sources for our work.
It doesn't matter because CM = AOSP.
If we get one thing working, the other will work too.
This means we'll release booth.
A clean AOSP rom and a CM7 rom at the same time.
Current Status:
- CWM 3.0.0 fully working
- bootlogo is fine now, no more pixelz!
- no rfs support anymore, MTD working (yaffs2), data on ext4
- problems on flash_image function
- Wifi working (Wifi sleep crashes phone)
- Phone working (a little polling problem on RIL)
- Graphics mostly working except overlay cause of framebuffer (youtube playback and camera ****ed up)
- Sensors dead (write a new driver)
- only one sdcard supported at the moment
- a secure method for rolling out must be created
Don't ask any questions. Let us just work on this stuff.
