Request:
PROCEDURE:
*DELETE EVERYTHING AFTER # ADDITIONAL_BUILD_PROPERTIES INCLUDING IT AND REPLACE WITH THIS ONE CAUSE OF DOUBLE LINES - FOR XPERIA MDPI DEVICES
*FOR ALL OTHER DEVICES COPY FROM ## UNLIMITED™TWEAKS ##
A)
1. Open "Root Explorer" and click the R/W
2. Go to /system/build.prop.
3. Backup yout current build.prop.
4. Long-press on Build.Prop and you’ll see a pop up.
5. Text Editor.
6. Type in those few line of words below into the last line of the text then save.
7.reboot and enjoy
B)
1. Open "Root Explorer" and click R/W
2. Go to /system and copy build.prop to your sd card
3. Copy build.prop to your pc
4. Copy tweaks to your build.prop
5. Move build.prop again to /system and change permission
HERE ARE MINE UNLIMITED™TWEAKS
Guys i would need a little favour.
As you may know im 17 years old.
Next year in august my class is going on school trip.
We dont know destination yet but it will probably be Czech Prague.
We would stay there around a week.
It would cost around 450euros + i need some money to spend 150euros.
Why am I asking for donations?
I would really want to go but i dont want my family to spend that kind of money but they cant even afford it.
My rom is one of most downloaded in this section and manny people use my UNLIMITED™tweaks and UNLIMITED™BOOST and i think i would deserve to get some help from you.
Every donation is helpful and I hope you will make this trip possible for me.
Hey guys here aret build.prop tweaks which i use in my roms
It will give you big boost
It will give you big boost
PROCEDURE:
*DELETE EVERYTHING AFTER # ADDITIONAL_BUILD_PROPERTIES INCLUDING IT AND REPLACE WITH THIS ONE CAUSE OF DOUBLE LINES - FOR XPERIA MDPI DEVICES
*FOR ALL OTHER DEVICES COPY FROM ## UNLIMITED™TWEAKS ##
A)
1. Open "Root Explorer" and click the R/W
2. Go to /system/build.prop.
3. Backup yout current build.prop.
4. Long-press on Build.Prop and you’ll see a pop up.
5. Text Editor.
6. Type in those few line of words below into the last line of the text then save.
7.reboot and enjoy
B)
1. Open "Root Explorer" and click R/W
2. Go to /system and copy build.prop to your sd card
3. Copy build.prop to your pc
4. Copy tweaks to your build.prop
5. Move build.prop again to /system and change permission
HERE ARE MINE UNLIMITED™TWEAKS
#
# ADDITIONAL_BUILD_PROPERTIES
#
drm.service.enabled=true
keyguard.no_require_sim=true
net.bt.name=Android
persist.sys.usb.config=mass_storage,adb
ro.com.google.clientidbase=android-sonyericsson
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.com.google.gmsversion=4.0_r1
ro.drm.active.num=4
ro.drm.active.0=semc,1
ro.drm.active.1=cmla,0
ro.drm.active.2=viaccess,0
ro.drm.active.3=marlin,1
ro.product-res-path=framework/SemcGenericUxpRes.apk
ro.setupwizard.mode=DISABLED
ro.sf.lcd_density=160
ro.semc.xloud.supported=true
ro.usb.pid_suffix=14F
######################
## UNLIMITED™TWEAKS ##
######################
##EXPLANATION
# lines starting with "##" are group titles
# lines starting with "#" are not working on ICS+ or they are cyanogenmod specific if your on GB/cyanogenmod its suggested to remove "#"
## System Tweaks
#debug.sf.nobootanimation=1 # disable bootanimation [to active remove "#"]
dev.bootcomplete=0 # faster booting
ro.config.hw_fast_dormancy=1
ro.config.hw_quickpoweron=true
#ro.HOME_APP_ADJ=1 #no effect in ICS +
ro.mot.eri.losalert.delay=1000
ro.ril.enable.amr.wideband=1
touch.presure.scale=0.001 # better touchscreen sensitivity
## Miscellaneous Tweaks
com.qc.hardware=1 # qualcomm
debug.qctwa.preservebuf=1 # qualcomm
debug.qctwa.statusbar=1 # qualcomm
debug.qc.hardware=true # qualcomm
persist.sys.shutdown.mode = hibernate
persist.telephony.support.ipv4=1
persist.telephony.support.ipv6=1
ro.telephony.sms_segment_size=160
pm.sleep_mode=1
ro.config.hw_fast_dormancy=1
ro.config.hw_power_saving=true
ro.media.enc.hprof.vid.fps=75
ro.mot.buttonlight.timeout=1
wifi.supplicant_scan_interval=180
## Signal Tweaks
persist.cust.tel.eons=1
persist.data_netmgrd_mtu=1482
persist.data_netmgrd_nint=8
ro.ril.gprsclass=10
ro.ril.hsdpa.category=8
ro.ril.hsupa.category=6
ro.ril.hsxpa=1
ro.ril.set.mtu1472=1
ro.use_data_netmgrd=true
## Wireless Speed Tweaks
net.ipv4.ip_no_pmtu_disc=0
net.ipv4.route.flush=1
net.ipv4.tcp_ecn=0
net.ipv4.tcp_fack=1
net.ipv4.tcp_mem=187000 187000 187000
net.ipv4.tcp_moderate_rcvbuf=1
net.ipv4.tcp_no_metrics_save=1
net.ipv4.tcp_rfc1337=1
net.ipv4.tcp_rmem=4096 39000 187000
net.ipv4.tcp_sack=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_window_scaling=1
net.ipv4.tcp_wmem=4096 39000 187000
net.tcp.buffersize.default=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960
## Makes streaming videos stream faster
media.stagefright.enable-http=true
media.stagefright.enable-meta=true
media.stagefright.enable-player=true
media.stagefright.enable-record=true
media.stagefright.enable-scan=true
## Website Bypass
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
## Graphics Enhancement
#ro.media.dec.jpeg.memcap=20000000 #no effect
ro.media.enc.hprof.vid.bps=8000000 # raise JPG quality to 100%
ro.media.enc.jpeg.quality=100
ro.media.enc.hprof.vid.fps=75
#video.accelerate.hw=1 #no effect on ICS +
## Disables data sent and logging
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
ro.config.nocheckin=1
## Scrolling Responsiveness
persist.cust.tel.eons=1
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
windowsmgr.max_events_per_sec=90
## Power Saving Tweaks
#pm.sleep_mode=1 # no effect in ICS +
power_supply.wakeup=enable
proximity_incall=enable
ro.config.hw_fast_dormancy=1
ro.config.hw_power_saving=1
ro.config.hw_quickpoweron=true
ro.ril.disable.power.collapse=1
ro.ril.sensor.sleep.control=1 # sensor sleep control
usb_wakeup=enable
## Dialing Tweaks
mot.proximity.delay=25
ro.lge.proximity.delay=25
ro.telephony.call_ring.delay=0 # Decrease dialing out delay
## DalvikVM
dalvik.vm.dexopt-data-only=1dalvik.vm.checkjni=false
dalvik.vm.dexopt-data-only=1
dalvik.vm.dexopt-flags=m=v,o=y
dalvik.vm.execution-mode=int:fast
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=64m # VM Heapsize, higher ram=higher value
dalvik.vm.heapstartsize=5m
dalvik.vm.jmiopts=forcecopy
dalvik.vm.lockprof.threshold=500
dalvik.vm.stack-trace-file=/data/anr/traces.txt
dalvik.vm.verify-bytecode=false
## Disable Logers (safe battery + performance gain)
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
ro.config.htc.nocheckin=1
ro.config.nocheckin=1
## Performance
debug.composition.type=gpu
debug.egl.profiler=1 # Enable egl profiler
debug.egl.hw=1
debug.enabletr=true
debug.gr.swapinterval=1
debug.kill_allocating_task=0
#Debug.performance.tuning=1 #no effect on ICS +
debug.qctwa.preservebuf=1
debug.sf.hw=1 # render UI with GPU
dev.pm.dyn_samplingrate=1
ENFORCE_PROCESS_LIMIT=false
hw3d.force=1
#persist.sys.purgeable_assets=1 #cyanogenmod specific
#persist.sys.use_dithering=0 #cyanogenmod specific # when [1] performance are lower but image quality is better
persist.sys.use_16bpp_alpha=1
persist.sampling_profiler=0
persist.service.pcsync.enable=0
persist.service.lgospd.enable=0
persist.sys.NV_FPSLIMIT=60
persist.sys.ui.hw=1
#profiler.force_disable_err_rpt=1 # htc specific
#profiler.force_disable_ulog=1 #no effect in ICS +
ro.config.disable.hw_accel=false
ro.debuggable=1
ro.fb.mode=1
ro.kernel.android.checkjni=0
ro.min_pointer_dur=8
ro.min_pointer_dur=1
ro.secure=0
ro.sf.compbypass.enable=1
ro.vold.umsdirtyratio=20
ro.wmt.blcr.enable=0 # Disable the zygote loader
Last edited: