[MOD][Xposed+Magisk][13 Compatible] AOSP Mods - System modifications for AOSP-based Android 12+

Search This thread

siavash79

Senior Member
Dec 6, 2010
640
1,989
Google Pixel C
Google Pixel 4 XL
I just entered issue #462 on GitHub concerning the splitting of the wifi and data into two separate QS tiles leaving the wifi tile showing connected to a network it has lost connection to. I couldn't figure out how to attach a file to GitHub. Would it be helpful to attach my settings export file here?
AOSP Mods will only "enable" the option, hidden in Android. However, Google stopped maintaining these tiles and they are a bit buggy.
 

specx2

Member
Oct 8, 2010
18
2
Hello. I'm going to try AOSP Mods. Please explain how the option to convert the taskbar to "Recents bar" works? The stock Taskbar in Android 13 is actually a Dockbar or Appbar. That is, it displays only those applications that have been added to it. Did I understand correctly that the option to convert the taskbar turns the stock Taskbar into a real-time taskbar? Sorry for bad english)
 

temporazed

Member
Jan 30, 2022
7
0
hi, thanks for this great module! Finally i can customize all i need. What's the difference between full and xposed release?
 

djcsurf

Senior Member
Jan 9, 2011
2,003
435
Kent
I have set to enable screenshot in secure apps, it takes the screenshot but shows a black screen. Using pixel 7 pro. Any advice pls
 
Last edited:

Morphine1

Senior Member
Sep 23, 2014
486
664
Andalusia.
This mod works perfectly. I absolutely love it and it became a total must.

I was just wondering if it could get an option to disable pulling the qs panel on the lockscreen. or at least make the toggles unable to tap on. That could be a great feature.
 

djcsurf

Senior Member
Jan 9, 2011
2,003
435
Kent
So asop mod allows secure screenshot using volume down & power buttons which works fine btw but if I create a gesture to take screenshots then the secure screenshot is black. Is there no possible work around or using buttons the only possible way?
 

finger11

Senior Member
May 16, 2011
182
17
san diego
Thank you for splitting the wifi and mobile data tiles.

Can I suggest to add an option to collapse the QS panel after pressing one of the QS tiles?
 

Schroeder09

Senior Member
Nov 6, 2017
976
152
Google Pixel 7 Pro
I've been using AOSP mods on A13 on my p7p. If I install and switch to nova launcher am I going to crash the phone and end up in a bootloop or something? I'm guessing it's best to turn all the mods off and restore to factory launcher settings. After switching my launcher to nova launcher pro will any of these mods still work?
 

siavash79

Senior Member
Dec 6, 2010
640
1,989
Google Pixel C
Google Pixel 4 XL
I've been using AOSP mods on A13 on my p7p. If I install and switch to nova launcher am I going to crash the phone and end up in a bootloop or something? I'm guessing it's best to turn all the mods off and restore to factory launcher settings. After switching my launcher to nova launcher pro will any of these mods still work?
If you're planning to install Nova from play store: don't take any precautions.
 
I've been using AOSP mods on A13 on my p7p. If I install and switch to nova launcher am I going to crash the phone and end up in a bootloop or something? I'm guessing it's best to turn all the mods off and restore to factory launcher settings. After switching my launcher to nova launcher pro will any of these mods still work?
I use nova launcher beta 8 and no issues with AOSP mods on Pixel 6 running stock with Radioactive kernel.
 

Dbj.Dhaval

Senior Member
May 17, 2014
1,213
108
Mumbai
Google Pixel 7 Pro
Using v. 2.4.0 full version on pixel 7 pro. Have selected move brightness slider to bottom. It soo happens after some time it will again go to default position to the top.. Have to again deselect and reselect the option to move the slider back to bottom.
 

i5lee8bit

Senior Member
PSA: AOSPMods 2.4 isn't compatible with December feature drop. It hopefully will be in the next version
I updated this morning (Pixel 7 Pro) and I can at least say it didn't bootloop my device. Most things are working, some things aren't (which I expected going into a QPR feature drop type update). I'm sure you're already on it, but things I noticed working so far vs. not working in case it helps.

Btw obviously I don't use all options, and even the ones I use I haven't tested all yet. But from quick checking over my settings:

Not working:
- double tap to sleep / to wake (lockscreen, not status bar)
- light theme on QS panel
- expand / collapse all buttons on notification panel

Working:
- recents clear all button
- insecure screenshot
- long press power torch while screen off
- circle battery mod (everything I use - percentage, scaling, fast charge colors)
- navbar swipe to top to kill
- navbar bottom left/right swipe up (action to sleep)
- vibrate/silent icons
- vibrate on QS tile**
- brightness level flashlight (I'm not using global)**
- 3x3 QS tiles / quick QS = 6
- brightness slider on QQS

If I didn't list an option, I prob don't use it or maybe just forgot. Point is, it works well enough to keep using it until broken features are fixed. YMMV, update at your own risk, etc.

** Question for dev: Not sure if this was always like this, something that needs to be fixed, or intended (I honestly never paid attention to it before, lol!) - but I noticed just now that toggling the Flashlight on or off from QS doesn't produce vibrate/haptic feedback despite having that option on. Is this on purpose and always been like that, a technical limitation, broken because of new update, or something that can be implemented in the future (I suppose a "feature request" in this case 😉)?

Anyway, hope all this info can help either devs with dev'ing or users with deciding.
 

Thebear j koss

Senior Member
I updated this morning (Pixel 7 Pro) and I can at least say it didn't bootloop my device. Most things are working, some things aren't (which I expected going into a QPR feature drop type update). I'm sure you're already on it, but things I noticed working so far vs. not working in case it helps.

Btw obviously I don't use all options, and even the ones I use I haven't tested all yet. But from quick checking over my settings:

Not working:
- double tap to sleep / to wake (lockscreen, not status bar)
- light theme on QS panel
- expand / collapse all buttons on notification panel

Working:
- recents clear all button
- insecure screenshot
- long press power torch while screen off
- circle battery mod (everything I use - percentage, scaling, fast charge colors)
- navbar swipe to top to kill
- navbar bottom left/right swipe up (action to sleep)
- vibrate/silent icons
- vibrate on QS tile**
- brightness level flashlight (I'm not using global)**
- 3x3 QS tiles / quick QS = 6
- brightness slider on QQS

If I didn't list an option, I prob don't use it or maybe just forgot. Point is, it works well enough to keep using it until broken features are fixed. YMMV, update at your own risk, etc.

** Question for dev: Not sure if this was always like this, something that needs to be fixed, or intended (I honestly never paid attention to it before, lol!) - but I noticed just now that toggling the Flashlight on or off from QS doesn't produce vibrate/haptic feedback despite having that option on. Is this on purpose and always been like that, a technical limitation, broken because of new update, or something that can be implemented in the future (I suppose a "feature request" in this case 😉)?

Anyway, hope all this info can help either devs with dev'ing or users with deciding.
I am not sure but it is most likely due to the slide level on the flashlight qs button.
 
  • Like
Reactions: i5lee8bit

Top Liked Posts

  • There are no posts matching your filters.
  • 10
    2.6.0 released in stable channel

    Changelog:
    Added:
    - Lockscreen shortcut mods
    - Hebrew translation
    - Option to set different QS tile setup in portrait/landscape

    ... And bugfixes

    I wish there was an api to post directly to XDA
    7
    Im facing a little problem with the notification icons in the statusbar.
    They arent in line with the clock.set a Bit down.
    Thus happens straight when i enter the aosp mod after a fresh Installation.
    Only happens with the newest 2.5 Version of it.
    With 2.4 i got no problems with the icons.

    Actually im in cherish os 4.3, but im facing the same problem on other roms like crdroid,ricedroid,sparkos.
    Dont know about Arrow and lineage.

    All roms are with the december secruity Patch. So im a little bit forced to usw 2.5 insteed of 2.4.


    Someone else faced the same issues and maybe found an solution for it?
    Yes it seems on some roms the notification icons don't sit exactly where they're supposed to.

    The "reason" why compatibility of AOSPMods is limited to pixel roms is that I don't have access to other custom roms to test the mod on them and find possible issues to solve (finding issues is not enough of course, the causes have to be identified). (Of course I can download and install those roms, but having limited resources - device and time -, it's not practical to support more)

    Edit: I do hope other Xposed devs can participate in the mod so that the range can get extended
    7
    In case anyone is wondering about the January update, I just installed it on my Pixel 7. From what I can tell, all of the (many) AOSP-Mods features I have enabled seem to be working without issue. YMMV ;-)
    7
    Didnt work. This module update destroyed everything. Even after reflash the custom Rom, it doesn't boot.

    I'll uninstall the module on my phone and never touch it again.

    This module is experimental sh%t
    No. You just failed to follow directions. Module has worked fine since day 1. Never had any issue with it. Maybe you should take the time to read before just installing things. It is completely unfair to the devs who have continued this project to have a user not follow directions and blame them/the module.
    7
    Ok I suggest to close this argument:

    As mentioned in the second post, magisk and Xposed mods are very tricky and should be used with lots of precautions and only by users with very high experience about rooting.

    In this specific case I guess at least one of these requirements (no matter which) was omitted, and as the result (also mentioned in post 2), the device had to be reset.

    Even I lost a whole pixel 6 phone because I ran a command when I was sleepy and not careful enough.

    My suggestion to everyone working with rooted devices is to read a lot, think about consequences of actions and finally be very, very careful. Always
  • 136

    AOSPMods_Banner_1280.jpg


    This is a mixed Xposed+Magisk module, which is made to allow customizations that are not originally designed in AOSP (Android Open Source Project).

    Features:
    Currently, AOSP Mods offers customizations on different aspects of system framework and SystemUI, including:
    - Status bar
    - Lock screen
    - Notifications
    - Quick Settings panel
    - Gestural Navigation
    - Screen properties

    Compatibility:
    These mods are designed based on AOSP source code. What does it mean? it means that they are expected to work on Roms (Firmwares) which are built based on fairly unmodified Android source code. This means, mainly, Pixel Phones (3, 4(XL/a), 5(a), 6(PRO/a), 7(PRO)), and any other Roms that haven't heavily modified the original Android codes.

    - Android 12: Compatible
    - Android 12.1 (12L): Compatible
    - Android 13 stable version: Compatible

    Prerequisites:
    - Compatible Roms (see above)
    - Device Rooted by Magisk 24.2+
    - LSPosed (Zygisk Version)


    How to install: (Make sure to read post #2 (FAQ) carefully before you proceed)
    - Install the Magisk module
    - Reboot (bootloop is not expected, but user should always be prepared for the worst)
    - You can use AOSPMods app to configure the module


    The module is released in 2 flavors, which download and update procedures are different:
    • Stable release:
      • Manual Install/Update: through repository's Github release page (link below)
      • Automated updates: through magisk manager, or through in-app updater
    • Canary release:
      • Manual Install/Update: only through repository's Actions page
      • Automated install/updates: only through in-app updater - updates will NOT appear in release section, and will NOT count against the module's download count
    *No matter which flavor you're on, you can always switch to the other one with in-app updater


    Credits / Thanks:
    Android Team
    @topjohnwu for Magisk
    @rovo89 for Xposed
    Team LSPosed
    Team EvolutionX (Specially @kdrag0n). Some of the mods are inspired from their work
    [email protected] for remote-preferences
    @nijel8 for double-tap to wake

    Translations:
    [email protected] Portuguese
    [email protected] Chinese Traditional
    [email protected] Chinese Simplified
    [email protected] Russian
    [email protected] Romanian
    [email protected] Polish
    [email protected] German
    [email protected] Spanish
    [email protected] Spanish
    [email protected] Spanish
    [email protected] Turkish
    [email protected] Turkish, German, Russian
    [email protected] Spanish
    [email protected] Ukrainian
    [email protected] Persian
    [email protected] Dutch
    [email protected] Vietnamese

    Graphic design:
    [email protected] (Icon and Banner)
    [email protected] (Icon)

    Brought to you by:
    @siavash79 & @Typhus_

    Download:
    Android 13 Dec 2022 (AOSP 13 R18) and later: get.aospmods.siava.sh

    Android 12 or 13 Nov 2022 (AOSP 13 R8) and earlier: AOSPMods v2.4.1
    42

    FAQ


    Q: I've found bugs, I have suggestions, or I want to suggest a new feature
    A: Your feedback will be very welcome. Please head to Github repository (linked below) and report your issue. We'll try our best (and never guarantee) to resolve them

    Q: The installation steps are too difficult / I'm not sure how to install the module
    A: This mod is made only (and only) for power users who know how to root their device, are fairly familiar with magisk, and are very fluent with adb/fastboot, specially if their device falls into bootloops, etc. IF you're not sure how to work with magisk, adb, bootloaders, root explorers, etc., you're making a huge risk by proceeding with installation of this mod, which we (the authors) cannot bear the consequences. Maybe your device never boots normally, or you can easily lose your data in case you make any mistakes.
    So, if you're not sure how to proceed, please (please) stop right here, and DO NOT GO FURTHER. We will not be responsible for any damage caused

    Q: Do you accept donations/payments?
    A: This module is not / will not be a commercial product. While we really appreciate your support, we do not / will not accept any payments for this module, in any form

    Q: How can I help?
    A: We will be more than happy to receive help, in any way possible. So, If you are a developer and can contribute to the project (which by the way is open source), we will gladly accept your contribution. Even if you're not a developer, you can always help us by opting-in for tests/experiments and provide feedbacks, so that we can further improve the module. (Please send a message to one of the authors)
    25

    Pre-Release

    Updated: April 11th., 2022

    This is a mixed Xposed+Magisk module, which is made to allow customizations that are not originally designed in AOSP (Android Open Source Project).

    (Current) Features:
    - Back gesture customization
    - (3-Button navigation) Hold back to kill app
    - Hide navigation bar
    - Light QS Theme
    - Vibrate on QS tile tap
    - One-Finger QS panel pulldown
    - Customize 4G/LTE icon
    - Combined signal Icons
    - Double-tap to sleep
    - Customization on Battery icon style and size
    - Configure build number text in QS footer
    - Hide fingerprint circle (Pixel 6)
    - Lockscreen shortcut customization
    - Configure carrier text in lock screen
    - Disable screenshot sound
    - Power button long-press to toggle Torch
    - Double-tap to wake
    - Network Monitor
    - Statusbar Height
    - Statusbar Padding (for phones with left-corner camera)
    - Quick Settings Row & Column numbers
    - Quick Settings tiles text size
    - Internet / Wifi + Cell Tiles
    - Navbar pill thickness
    - Navbar pill theme
    - Keyboard height
    - Icon shapes
    - Statusbar Icon styles
    - Fonts
    - Themed Icons
    - SystemUI Tuner
    - Brightness Slider in Quick QS
    - Battery Bar
    - Volume Longpress to skip music
    - QS Tiles Styles
    - Dark Theme Styles
    - Longpress on settings icon (in QS) to launch AOSPMods manager
    - Expand/Collapse all notifications
    - Tablet taskbar (12.1+)

    Of course, this is an ongoing work and the feature list will get longer through time

    Compatibility:
    These mods are designed based on AOSP source code. What does it mean? it means that they are expected to work on Roms (Firmwares) which are build based on fairly unmodified Android source code. This means mainly Pixel Phones (3, 4, 4a, 5, 5a, 6), and any other phones that haven't heavily modified the original Android.

    - Android 12: Compatible
    - Android 12.1 (12L): Compatible
    - Andriod 12.1 beta: Compatible
    - Android 13 DP1: Compatible
    - Android 13 DP2: Poorly Compatible


    Prerequisits:
    - Compatible Roms (see above)
    - Device Rooted by Magisk 24.2+
    - LSPosed (Zygisk Version)


    How to install: (Make sure to read post #2 (FAQ) carefully before you proceed)
    - Install the magisk module
    - Reboot (bootloops are not expected)
    - You can use AOSPMods app to configure the module


    Credits / Thanks:
    Android Team
    @topjohnwu for Magisk
    @rovo89 for Xposed
    Team LSPosed
    Team EvolutionX (Specially @kdrag0n). Most of the mods are based on their work
    [email protected] for remote-preferences
    @nijel8 for double-tap to wake
    @HofaTheRipper for German translation
    [email protected] for Chinese translation
    [email protected] for Spanish translation
    @krystiano for Polish translation
    [email protected] for Chinese Smiplified translation

    Brought to you by:
    @siavash79 & @Typhus_

    Download (Canary 009)
    V 1.0.0-canary-010


    Changelog:

    • Added music album art on lockscreen
    • Added auto-grant of required root permissions
    • Improvement of Battery Bar
    • Improved Light QS header
    • Fixed screenshot lag
    • Fixed 3 column QS tiles bug
    • Misc Bugfixes

    If you're updating from previous versions:
    • 1.0.0-beta-01 and after: Update your module via module update shortcut in Magisk
    • canary 007 and before: uninstall your module and app completely and flash the zip file

    Download:
    24
    I would like to draw your attention that the thread title doesn't contain [Prerelease] anymore!

    1.0.0 is out! All credits go to @Typhus_
    22

    Pre-Release

    Updated: April 1st., 2022

    This is a mixed Xposed+Magisk module, which is made to allow customizations that are not originally designed in AOSP (Android Open Source Project).

    (Current) Features:
    - Back gesture customization
    - (3-Button navigation) Hold back to kill app
    - Hide navigation bar
    - Light QS Theme
    - Vibrate on QS tile tap
    - One-Finger QS panel pulldown
    - Customize 4G/LTE icon
    - Combined signal Icons
    - Double-tap to sleep
    - Customization on Battery icon style and size
    - Configure build number text in QS footer
    - Hide fingerprint circle (Pixel 6)
    - Add camera button to lockscreen
    - Configure carrier text in lock screen
    - Disable screenshot sound
    - Power button long-press to toggle Torch
    - Double-tap to wake
    - Network Monitor
    - Statusbar Height
    - Statusbar Padding (for phones with left-corner camera)
    - Quick Settings Row & Column numbers
    - Quick Settings tiles text size
    - Internet / Wifi + Cell Tiles
    - Navbar pill thickness
    - Navbar pill theme
    - Keyboard height
    - Icon shapes
    - Statusbar Icon styles
    - Fonts
    - Themed Icons
    - Lockscreen assistant shortcut
    - SystemUI Tuner

    Of course, this is an ongoing work and the feature list will get longer through time

    Compatibility:
    These mods are designed based on AOSP source code. What does it mean? it means that they are expected to work on Roms (Firmwares) which are build based on fairly unmodified Android source code. This means mainly Pixel Phones (3, 4, 4a, 5, 5a, 6), and any other phones that haven't heavily modified the original Android.

    - Android 12: Compatible
    - Android 12.1 (12L): Compatible
    - Andriod 12.1 beta: Compatible
    - Android 13 DP1: Compatible
    - Android 13 DP2: Partially Compatible


    Prerequisits:
    - Compatible Roms (see above)
    - Device Rooted by Magisk 24.2+
    - LSPosed (Zygisk Version)


    How to install: (Make sure to read post #2 (FAQ) carefully before you proceed)
    - Install the magisk module
    - Reboot (bootloops are not expected)
    - You can use AOSPMods app to configure the module


    Credits / Thanks:
    Android Team
    @topjohnwu for Magisk
    @rovo89 for Xposed
    Team LSPosed
    Team EvolutionX (Specially @kdrag0n). Most of the mods are based on their work
    [email protected] for remote-preferences
    @nijel8 for double-tap to wake
    @HofaTheRipper for German translation
    [email protected] for Chinese translation

    Brought to you by:
    @siavash79 & @Typhus_

    Download (Canary 007)
    V 1.0.0-beta-01

    As promised, we've made it to another release for April 1st.

    Changelog:​

    Added customization of

    • Statusbar Height
    • Statusbar Padding (for phones with left-corner camera)
    • Quick Settings Row & Column numbers
    • Quick Settings tiles text size
    • Internet / Wifi + Cell Tiles
    • Navbar pill thickness
    • Navbar pill theme
    • Keyboard height
    Themes

    • Icon shapes
    • Statusbar Icon styles
    • Fonts
    • Themed Icons
    Other

    • Added Lockscreen assistant shortcut
    • Added SystemUI Tuner
    • Compatibility with Lsposed 1.8
    • The module manager App is now included in the Magisk module
    • German Translation (Thanks to @HofaTheRipper )
    • Chinese Translation (Thanks to cracky5322@Github)
    • Many bugfixes

    ALSO: We've included another feature which is NOT listed above! Let's see who finds it first :D


    If you're updating from previous versions:
    • Uninstall AOSPMods app from your device and do a fresh installation
    • You can find future updates in Magisk, whenever the module is updated. You won't need to uninstall your current versions later anymore (Hopefully!)

    To install, you will need to
    1. Install LSPosed Zygisk (https://t.me/LSPosedArchives)
    2. Install the zip file in Magisk
    3. Reboot
    4. Technically, the module should automatically activate itself in Lsposed. If didn't, please activate manually and reboot again

    Download: