[Modem][Odin][Stopped]Samsung Galaxy S4 Mini Duos I9192
- Thread starter SilviuMik
- Start date
LOLI will if u explain it betterI don`t understand a thing
.. simple ... when u flash 2 times the modem in cp you MUST let the auto reboot boots into the rom .. if you go to recovery or any other mode you wont have the modem ... simple as that S4 mini WIFI issues
I tried to do the procedure, but nothing happens, does not change the baseband
what can I do?
My problem is that sometimes the WIFI stops working and you must disconnect and connect to the wifi back.
The problem also has 3G signal, sometimes shows it has signal, but do not get or connection.
With this update, it solves?
---------- Post added at 11:41 PM ---------- Previous post was at 11:14 PM ----------
Estou tentando atualizar, mas não acontece nada, simplesmente nao muda o baseband.
Voce estava tendo qual problema?
I tried to do the procedure, but nothing happens, does not change the baseband
what can I do?
My problem is that sometimes the WIFI stops working and you must disconnect and connect to the wifi back.
The problem also has 3G signal, sometimes shows it has signal, but do not get or connection.
With this update, it solves?
---------- Post added at 11:41 PM ---------- Previous post was at 11:14 PM ----------
Junior, como você fez? Qual versão vc tinha?
Estou tentando atualizar, mas não acontece nada, simplesmente nao muda o baseband.
Voce estava tendo qual problema?
You have to flash the modem a lot of times because it not install at the first time. So try install again, again and again to get it installed.
Is there a modem for the GTI9190 (3G) version of this phone?
Latest modem from 9192 stock KK
Last edited:
Is it safe to flash over a Knox free 4.2.2?
I'm planning to try this kk modem on cm11, but I don't want to flash the whole stock kk and their Knox 2.0
sent from my i9192 with CM11 by sekil
I'm using it with CM11 since yesterday
If i remember correctly, modem flash don't trigger knox, only recovery and kernel/rom.
Did you flash it 2 or more times in a row as described in this thread?
mine failI'm using it with CM11 since yesterday
If i remember correctly, modem flash don't trigger knox, only recovery and kernel/rom.
Code:
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Modem_I9192XXUCNG2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> Modem_I9192XXUCNG2.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> Transmission Complete..
<ID:0/007> Now Writing.. Please wait about 2 minutes
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Receive Response from boot-loader
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!Try this Odin_v3.10.rar 802 KB
https://mega.co.nz/#!xEMBWCAC!ff8RoGUmK0GNHwtprf2MTR4ssKTDtphIbUFwTlfGqsI
+
Modem_I9192XXUCNG2.tar.rar 16.9 MB
https://mega.co.nz/#!ocMzBSiC!IUyt6EYhINXKLmgWcOqlNuyTuWDvZlsvV_tTB8czxnQ
I used odin 3.07, it worked, and you manage to flash with 3.10.
Seems that we need to avoid 3.09
It's working after flash three times, thanks
The new Modem must be better with signals and Wifi especially when I use CM11, Right?
All are on my drive and i checked them. They are working
@chemicalrage Don`t remember i think somewhere on xda i saw it
Last edited:
when I flashed one by SilviuMik with odin 3.09, it worked. I notice the different size of these two version.I used odin 3.07, it worked, and you manage to flash with 3.10.
Seems that we need to avoid 3.09