[MODULE] Smali Patcher 7.4
- Thread starter fOmey
- Start date
don't seem like these GPS spoofing apps work. Too bad this module isn't updated anymore
is there someone going to take it back and working on newer android? letting this module to die is very bad, they are takin down all the useful stuff lately
OFF: You can try the Lsposed + hidemocklocations method but don't set too high expectations. And if your goal is PoGo, Polygon is not compatible with A13 yet. That's why I haven't updated my device yet.
jamescable
Senior Member
I've used zygisk and brandonalls mock location lsposed app but gpsjoystick from ninja and have been able to spoof location for pogo on all android version and devices for Oneplus and Pixel, including pixel 6 pro
Dear Admin and All
i have a situation.
below are screenshot about my device, xiaomi redmi note 10 pro/
look like if smali module is being installted via magisk.
i follow direction from this forum.
is there any answer why this happened ?
for i cant use any fake gps without being trace.
big THANKS.
*sorry for my bad english
i have a situation.
below are screenshot about my device, xiaomi redmi note 10 pro/
look like if smali module is being installted via magisk.
i follow direction from this forum.
is there any answer why this happened ?
for i cant use any fake gps without being trace.
big THANKS.
*sorry for my bad english
It still works on my 9 pro oos 13 like everything works i can't even find my device
but my 10 pro had a error patching but still works in some ways I only wish this one is getting updated
so that i can use it on my OnePlus 10 pro fully
Or find ipogo even for non root uses and its in bèta stage on Android so I'm you get a free code on discord and they even have a root version
Attachments
I don't know if I understood correctly, did you mean that the Ipogo has a beta version compatible with A13?
I believe this module was good at spoofing precise location also and not just IPs.... most of the apps out there would spoof IPs and that's enough for most.... I am searching for something that can spoof precise location
I think that would not not be a drawback in the end because it means that is harder for big g. to make a patch or reverse-code, but we wll really miss this patcher for future android versions
Does this work with Magisk v25.2?
Also does it need Zygisk or riru or is it a normal Magisk module that'll work on v25.2?
I'm on Android 10 and might update to 11
Also does it need Zygisk or riru or is it a normal Magisk module that'll work on v25.2?
I'm on Android 10 and might update to 11
Why though? What version of magisk and/or Android did it stop working on?
Works fine for me on magisk v23 and Android 10
On P7, A13 stable build (JAN update), Magisk 25.2.
I have mock locations, mock providers, secure flags, and high volume warnings enabled.
I ran the patch, which installed successfully on Magisk.
Now I can't take screenshot, it says screenshot disable by IT Admin.
There's Magisk modules to enable screenshots.. just reinstall this without that patch..
I'm assuming the rest of the features work fine?
wheres that module?
allow screenshots to bypass restrictions on screenshots set by the system?
i will preseume but i have found other lsposed module to mocked locations except for the screenshot
Similar threads
- Sticky
Top Liked Posts
-
There are no posts matching your filters.
-
422
Smali Patcher
WHAT THE HELL IS THIS THING? ::
To sum things up this is an application I developed that pulls the android framework from your device, applies what I (or other users) consider useful patches to the sourced files and then finally generates a magisk module applying the patches system-lessly.
The unique thing about Smali Patcher is it sources the framework files from your device, in an attempt to provide maximum compatibility across the entire android device family.
While I have your attention I wanted to throw out a massive thank you to all the people who have provided support to the project and the thread over the years, you guys are absolute champions. I can't thank you enough and couldn't have done it without you, here's to ya!
PATCHES ::
- Mock locations - Hide mock locations status, allowing apps like Pokemon GO to treat them as genuine location updates.
- Mock Providers: Allow creation of mock providers without mock permissions.
- GNSS updates: Disable all GNSS (GPS) location updates.
- Secure flag - Allow screenshots/screensharing in secure apps.
- Signature verification (as-is, legacy support only) - Disable signature verification allowing modification/execution of signed system apps.
- Signature spoofing (as-is) - Enable signature spoofing app permission.
- Recovery reboot - Reboot directly back into recovery from powermenu.
- Samsung Knox (as-is, legacy support only) - Bypass Samsung Knox trip protection, only confirmed working for secure folder.
- High volume warning - Disable high volume popup dialog.
GPS SPOOFERS / FUSEDLOCATION / RUBBERBANDING NOTICE ::
FusedLocation API GPS spoofers are NOT compatible with the mock location patch.. your required to use a traditional GPS spoofer! Spoofed location updates will be fed into fusedlocation all the same, meaning you don't need to disable the service.. which means while your not spoofing you still gain the benefit of fusedlocation which is all around more accurate location updates!
REQUIREMENTS ::
- PC with at least 3GB+ of RAM.
- .NET Framework 4.7.1 or later installed
- Java installed
- Android device running 6.0 or above.
INSTRUCTIONS (ADB METHOD/AUTOMATED - RECOMMENDED):
COMPATIBLE WITH BOTH ODEX & DEODEXED ROMS! WILL AUTOMATICALLY DEODEX REQUIRED FILES IF NECESSARY.
- Backup device.. safety first kids.
- Enable USB debugging in developer settings on your device and connect via USB to your PC.
- Authorise USB debugging connection on your phone.. example of popup.
- Run "SmaliPatcher.exe", First startup will automatically download the latest necessary binary's.
- Select your desired patches.
- Hit "ADB PATCH" button (yes without browsing for a .jar file).
- Once the process has completed, magisk module will be generated in the same directory as "SmaliPatcher.exe" named: "[email protected]".
- Install the generated magisk module either in recovery mode or from the magisk app.
- Enable smali patcher module in magisk.
INSTRUCTIONS (ALTERNATIVE METHOD - FOLLOW ONLY IF ADB METHOD FAILS) ::
BEFORE REPORTING ANY ISSUES ::
- You have tried running the patcher as administrator.
- You have accepted the USB debugging connection & ticked "Always allow from this computer".
- You have tried running the patcher with phone booted in recovery mode with /system mounted.
UPDATING MODULE INSTRUCTIONS:
Disable/uninstall any active smali patcher modules before generating a new one! If you generate a module with a older version active there's a chance the outdated patches will carry over to the new module.. I do my best efforts to prevent this, but it may still happen. Before reporting issues, make sure you have tried this.
CHANGELOG ::
Cheers,
Honorable mention to @Eng.Raman & @A30NI_Y, who has been kind enough to patch service.jar's for tons of users who lack the knowledge to deodex (despite my best efforts of writing out clear instructions!)... the smali patcher user base thanks you for your service!
PRECAUTIONS / TERMS OF USE ::
You must backup your device prior to flashing the module, I am not responsible or providing support to recover any devices stuck in bootloops.. if for what ever reason you find yourself in this situation, simply uninstall magisk and reinstall.. doing this will reset your installed modules.
PLEASE READ FAQ IN POST 2 & SEARCH THE THREAD BEFORE ASKING QUESTIONS, CHANCES ARE THEY HAVE BEEN ANSWERED ALREADY AND YOU CAN FIND YOUR ANSWER IMMEDIATELY.
Rather then making mirrors of the download link, please redirect traffic to this thread to ensure they are always using the latest version! Oh hi reddit.
DOWNLOAD MIRRORS
82
FAQ
HELP! I'M STUCK IN A BOOTLOOP, HOW DO I UNINSTALL ::
- Boot into TWRP
- Advanced -> File Manager
- Navigate to: data -> adb -> modules -> select the module directory (in this case "fomey.smalipatcher") -> Folder icon (bottom right of screen) -> Delete
MAGISK TEMPLATE DOWNLOAD FAILED ::
- Run the patcher as administrator, may not have read / write access to drive.
- Verify you have a active internet connection.
- Verify firewall is not blocking the patcher.
- Verify your not running a outdated .NET framework.
MOCK LOCATION RUBBER BANDS TO REAL LOCATION ::
- Set device only in location method settings (Settings -> Location -> Location method).
- Disable improve location accuracy settings (Settings -> Location -> Improve accuracy).
- If you are still experiencing rubber banding after trying everything above, try a different spoofer.
INVALID OR CORRUPT JAR FILE BIN ::
- Delete the "bin" directory and restart the patcher to re-download the binary files.
- Corruption is caused by a unreliable internet connection.
HOW DO I CLEAR A MOCK LOCATION WHILE USING A GPS SPOOFER ::
- Exit the app by pressing the "back" key, you may have to press this a few times. Any good spoofer should clean up after itself, by removing any mock providers on exit.
MAGISK TEMPLATE FAILED TO DOWNLOAD ::
- Make sure you're using the LATEST release of the patcher.
- If you are using the latest version already.. a update will be available shortly to fix this issue.
UNSUPPORTED MAJOR.MINOR VERSION XX.X ::
- Use the Java Uninstall Tool to clean up out-of-date java versions and reinstall the latest java release.
W: COULD NOT FIND RESOURCES ::
- This is a harmless warning, you can safely ignore it.
!!! ERROR: BASE DIRECTORY NOT FOUND ::
- You did not accept the USB debugging permission popup on your phone.. the patcher can't do anything without this permission (example of popup).
- The permission popup should be displayed after hitting the "ADB PATCH" button.. or as soon as you connect your phone to your PC.
- If you can't see the permission popup: go to settings -> developer options -> revoke usb debugging authorisations.. disconnect and reconnect your phone and try again.
- Make sure you tick "always allow from this computer".. otherwise you may have to confirm the popup multiple times during a single patch.
!!! ERROR: XYZ CLASS NOT FOUND ::
- The patch is most likely not compatible with your android version/device, if a patch is marked "as-is" no further support is provided.
- If you are browsing for a services.jar - it's most likely not deodexed.. try the "ADB METHOD".
- If you are using the "ADB METHOD" and you receive this error, post a reply to this thread including as much information as you can. Useful information: android version, patcher log and the directory named "adb" in the patcher folder (upload this directory to google drive).
17Deodexing Services.jar For Android 8.1
Full Step By Step Guide
1. Download "Batch ApkTool 3.7.0" by BurSoft from the official site or 4pad link. (Thanks:good:to burSoft for this amazing tool).
BatchApkTool370.7z ( for 64-bit Windows ).
BatchApkTool370_32bit_and_XP.7z ( for 32-bit Windows and Windows XP ).
2. Download the plugin named vdex2dex which will be used with Batch ApkTool ( vdex2dex1.0.2.zip )
(alternative 4pda link ).
3. Extract Batch ApkTool to any where on your PC then extract and move vdex2dex plugin folder to
( X:\BatchApkTool\bin\plugins\ ).
4. Go to ( X:\BatchApkTool\_system\ ) and create 4 empty folders named "framework", "arm64", "oat" and another "arm64" arranged as follows:
( X:\BatchApkTool\_system\framework ).
( X:\BatchApkTool\_system\framework\arm64 ).
( X:\BatchApkTool\_system\framework\oat\arm64 ).
5. Copy the following 3 files from your phone to the PC:
"services.jar" from ( /system/framework/ ) to ( X:\BatchApkTool\_system\framework ).
"boot.oat" from ( /system/framework/arm64 ) to ( X:\BatchApkTool\_system\framework\arm64 ).
"services.vdex" from ( /system/framework/oat/arm64 ) to ( X:\BatchApkTool\_system\framework\oat\arm64 ).
6. Run Batch ApkTool and select your language then hit the no. "7" plugins.
7. Hit the no. next to vdex2dex then will tell you to press any key to continue and after a few seconds will see "Done", now press any key to return to the main menu and exit.
8. Now you have a deodexd services.jar created in ( X:\BatchApkTool\_system\framework\ ) move or copy it to the smali patcher tool folder and generate the magisk module zip.
9. Done.
