Requirements :
ADB Drivers
Fastboot
Moto G Stock Firmware
Downlaods :
ADB & Fastboot Setup - https://drive.google.com/file/d/0BxE4PACUiwQqVkxCOTJBZ29WNnc/view?usp=sharing
Unbrick Zip - https://drive.google.com/file/d/0BxE4PACUiwQqN0xvOGpJMUg5MVU/view?usp=sharing
CWM Touch Recovery - https://drive.google.com/file/d/0BxE4PACUiwQqbXFpU25Eb3lIWkE/view?usp=sharing
PAC-MAN ROM with GApps - http://forum.xda-developers.com/showthread.php?t=2667834
Credits : Firmware Team
CWM
Carlos Spitzer
If your phone doesn't turn on after the battery dies, then keep the power button pressed till you see the battery icon. Always connect to a wall charger if the battery is dead after the phone is hard bricked.
Method :
To Enter Fastboot :
1) When your phone is turned off, press the power key and volume down button for around 5-10 seconds and let it go.
2) Connect your phone to your pc via usb.
3) Install the setup provided in the link and press "y" in the window.
To Flash Firmware :
3) Extract the zip which contains a batch file "unbrick.bat", 5.0.2 Firmware & Fastboot.
4) Run the batch file "unbrick.bat"
If your phone is still stuck in a bootloop, I would recommend you to first flash the CWM Recovery using fastboot.
Then, you can sideload a ROM (I used PAC-MAN) using ADB. Then just flash the ROM in CWM. If you need stock, then follow the above steps after successfully booting into PAC-MAN ROM. I have provided all the links above.
That's it, you are done!
ADB Drivers
Fastboot
Moto G Stock Firmware
Downlaods :
ADB & Fastboot Setup - https://drive.google.com/file/d/0BxE4PACUiwQqVkxCOTJBZ29WNnc/view?usp=sharing
Unbrick Zip - https://drive.google.com/file/d/0BxE4PACUiwQqN0xvOGpJMUg5MVU/view?usp=sharing
CWM Touch Recovery - https://drive.google.com/file/d/0BxE4PACUiwQqbXFpU25Eb3lIWkE/view?usp=sharing
PAC-MAN ROM with GApps - http://forum.xda-developers.com/showthread.php?t=2667834
Credits : Firmware Team
CWM
Carlos Spitzer
If your phone doesn't turn on after the battery dies, then keep the power button pressed till you see the battery icon. Always connect to a wall charger if the battery is dead after the phone is hard bricked.
Method :
To Enter Fastboot :
1) When your phone is turned off, press the power key and volume down button for around 5-10 seconds and let it go.
2) Connect your phone to your pc via usb.
3) Install the setup provided in the link and press "y" in the window.
To Flash Firmware :
3) Extract the zip which contains a batch file "unbrick.bat", 5.0.2 Firmware & Fastboot.
4) Run the batch file "unbrick.bat"
If your phone is still stuck in a bootloop, I would recommend you to first flash the CWM Recovery using fastboot.
Then, you can sideload a ROM (I used PAC-MAN) using ADB. Then just flash the ROM in CWM. If you need stock, then follow the above steps after successfully booting into PAC-MAN ROM. I have provided all the links above.
That's it, you are done!
Last edited: