[MOTO G] XT1032 black screen after booting up [can be closed]

Despia

New member
Sep 24, 2015
1
0
0
Hello there,

after booting up the phone (Android 5.0.2), the screen turs black (with backlight), becomes warm over time and reboots, no input possible.
I've read almost any post about that problem but nothing helped. I dont know how that problem happened, nothing unusual happened.
At first, i tried booting into bootloader and used there
- Normal Bootup -> booting up with same problem
- factory -> booting up with same problem
- recovery -> "bootup failed"
- barcodes -> Showing barcodes with Informatios (IMEI, Model No. ...)
- QCOM -> booting up with same problem
- BP Tools -> booting up with same problem

So i successfully unlocked the phone (Code 3, warranty was already over) to install the stock recovery -> Success, booting in recovery displaying "no Command". (waiting and then press power and vol. up get me into recovery). Then, i tried to install custom recovery (TWRP and CWM), the log on Phone says "mismatched partition size" but no errors, CMD says OK [...] OK.
Booting in Recovery -> "No Command" no matter what recovery i had flashed.

Booting an recovery out of CMD with "fastboot boot recovery.img" works for twrp-2.8.7.0.-falcon_GPE.img.
Doing "Factory reset with swipe" gives:

Updating Partition details...
E: unable to stat '/data/data/com.google.android.gms/sharedprefs/checkin.xml' other errors concerning '/data/data/com.cleanmaster.mguard[...]'
E: unable to open '/cache/recovery/.version'
MTP Enabled
but it has done factory reset. Trying to mount and send a custom firmware to SD results in error, device not responding.
Formatting data has failed with same errors as above (E: unable to ... '/data/data/[...])

The folder cant removed due to:
E:rm -rf "/data/data/com.cleanmaster.mguard" process ended with ERROR=1

Next, i tried to flash the Stock firmware (im from Germany, it was an O2-Promo with Google play) "XT1032_FALCON-O2DE_5.0.2_LXB22.46-28.1_1_cid7_CFC_1FF.xml.zip" with fastboot and mfastboot.V2. No errors from CMD, log on Phone wrote sometimes in purple "Image Size too big", but no errors. Wipe user and wipe cache, then reboot, no success.
I've tried many other firmware versions (EU and DE only, Lollipop and KitKat) step by step for each instruction with fastboot, also no success.

It seems that the write operations take no effect, even erasing partitions like recovery only displays on CMD

erasing 'recovery'...
(bootloader) Erase allowed in unlocked state
OKAY [ 0.031s]
finished. total time: 0.031s

without any effect, stock ercovery remains there, but the phone is unlocked. Now i dont know how to move on anymore, after working on the phone for 7 Hours.
Can you, the experts on XDA, help me? If needed, i can post more informations...

EDIT: It seems to be a hardware error caused by internal SDcard. Ordered a new phone, thread can be closed.
 
Last edited: