Moto g6 plus rooted with MAgick updating OTA procedure

[ko2005pu]

I want to update my current Stock Room version by OTA


Could anyone confirm if the stock rom OTA updates of a mobile already routed with Magisk are being executed following the procedure of the Magisk OP for "Devices with A / B Partitions" in xdadevelopers Forum?


https://github.com/topjohnwu/Magisk/blob/master/docs/tips.md#ota-installation-tips

-Please disable Automatic system updates in developer options, so it won't install OTAs without your acknowledgement.
-When an OTA is available, first go to (Magisk Manager → Uninstall → Restore Images). Do not reboot or you will have Magisk uninstalled. This will restore your boot (and dtbo if applicable) back to 100% untouched stock images in order to pass pre-OTA block verifications. This step is required before doing any of the following steps written below!
-After restoring stock boot image, apply OTAs as you normally would (Settings → System → System Update).
-Wait for the installation to be fully done (both step 1 and step 2 of the OTA), do not press the restart button!! Instead, go to (Magisk Manager → Install → Install to Inactive Slot) and install Magisk to the slot that the OTA engine just updated.
-After installation is done, press the reboot button in Magisk Manager. Under-the-hood Magisk Manager forces your device to switch to the updated slot, bypassing any possible post-OTA verifications.


Many thanks in advancehttps://cdn-cf-3.xda-developers.com/images/smilies/highfive.gif

 

[leo_hacker82]

dont work for me..i get the update but when start to download fail at 1%

 

[Aaronmv]

ise all the steps however it does not let me download and throws me the notification and interrupts me every so often that it could not be updated but there is something that is not clear to me when it comes to restoring images in magis also after that it is necessary to give it also to be uninstalled or it was only to restore because it has not worked for me after 1% makes me wrong and does not install me