This tool just automate command line process read how to section
[Motorola]{Any Moto series device} Moto All-In-one Tool v2.0
- Thread starter hard91
- Start date
ADB issue?
I continue to get this error message even after making sure drivers have been installed and USB-debugging is enabled. Any thoughts?
"'adb' is not recognized as an internal or external command,
operable program or batch file."
Thank you!
I continue to get this error message even after making sure drivers have been installed and USB-debugging is enabled. Any thoughts?
"'adb' is not recognized as an internal or external command,
operable program or batch file."
Thank you!
Thanks! Worked perfect to get phone info and initial connectivity, however now I get the "no command" droid after attempting to flash twrp recovery.
I apologize. I realized that in order for any of this to happen, the bootloader has to be unlocked. Unfortunately I don't have this option because I have a Verizon device.
Sorry I don't knowCan I use this tool to root and flash a new stock rom in a Moto G4 Amazon Prime version? If it is possible, could you please tell me the link to download the firmware?
Thanks!
Help
sir, I own Moto E 1st Gen (XT1022 Dual SIM India) & I'm experiencing some software issues (like battery always shows 100%, wifi doesn't turns on etc.). In Order to fix it, I need to flash ROM on it while it runs on Stock 5.1 LPCS23.13-34.8-3 & has never been rooted neither bootloader is unlocked.
I want exact procedure which service centre guys use to flash a phone
Can I follow above mentioned steps without being rooted & while already running the stock ROM?
<I'm new to Android & I need your support>
MOTO All-In-one Tool
Supported Model:
1. Any Motorola device to Flash Stock ROM.
Pre-Required:
1. Windows OS
2. STOCK ROM For flashing.
3. SuperSu.zip for rooting.
4. Bootloader Key to unlock bootloader.
5. Stock Recovery for flashing.
Downloads:
*In next Post
Bugs:
1. You tell
Features:
1. Flashing stock ROM on any Motorola Device (Any model).
2. Root through SuperSu.zip.
3. custom recovery.
4. Bootloader lock and unlock (Required bootloader key).
5. Flashing logo.bin to remove bootloader warning message.
6. sideload any zip/ROM.
7. Installing ADB & mfastboot driver.
Request:
Please don't add direct download link in your form@Xda or in your website. if you want to add in your thread then
First ask me for permission and after that mention me in your thread and instead of giving download link, direct them to this page for downloading.
Please rate this thread to 5 * so that this tool can be published on XDA Portal
XDA:DevDB Information
Moto All-In-one Tool, Tool/Utility for all devices (see above for details)
Contributors
hard91
Version Information
Status: Stable
Stable Release Date: 2016-09-17
Created 2016-09-17
Last Updated 2016-11-02
sir, I own Moto E 1st Gen (XT1022 Dual SIM India) & I'm experiencing some software issues (like battery always shows 100%, wifi doesn't turns on etc.). In Order to fix it, I need to flash ROM on it while it runs on Stock 5.1 LPCS23.13-34.8-3 & has never been rooted neither bootloader is unlocked.
I want exact procedure which service centre guys use to flash a phone
Can I follow above mentioned steps without being rooted & while already running the stock ROM?
<I'm new to Android & I need your support>
But, I'm not rooted & neither do I want.
To be clear, I want exact procedure that service center guys follow to rectify any software issue on moto e 1st gen
Last edited:
May be your internet problemgot it!
But the (mediafire)link isn't downloading the file, stops after 2-3MB
Hit thank to support my work
MOTO All-In-one Tool
Supported Model:
1. Any Motorola device to Flash Stock ROM.
Pre-Required:
1. Windows OS
2. STOCK ROM For flashing.
3. SuperSu.zip for rooting.
4. Bootloader Key to unlock bootloader.
5. Stock Recovery for flashing.
Downloads:
*In next Post
Bugs:
1. You tell
Features:
1. Flashing stock ROM on any Motorola Device (Any model).
2. Root through SuperSu.zip.
3. custom recovery.
4. Bootloader lock and unlock (Required bootloader key).
5. Flashing logo.bin to remove bootloader warning message.
6. sideload any zip/ROM.
7. Installing ADB & mfastboot driver.
Request:
Please don't add direct download link in your form@Xda or in your website. if you want to add in your thread then
First ask me for permission and after that mention me in your thread and instead of giving download link, direct them to this page for downloading.
Please rate this thread to 5 * so that this tool can be published on XDA Portal
XDA:DevDB Information
Moto All-In-one Tool, Tool/Utility for all devices (see above for details)
Contributors
hard91
Version Information
Status: Stable
Stable Release Date: 2016-09-17
Created 2016-09-17
Last Updated 2016-11-02
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
115MOTO All-In-one Tool
Supported Model:
1. Any Motorola device to Flash Stock ROM ( except mtk chipset devices like moto e3)
Pre-Required:
1. Windows OS
2. STOCK ROM For flashing.
3. SuperSu.zip for rooting.
4. Bootloader Key to unlock bootloader.
5. Stock Recovery for flashing.
Downloads:
*In next Post
Bugs:
1. You tell:cyclops:
Features:
1. Flashing stock ROM on any Motorola Device (Any model).
2. Root through SuperSu.zip.
3. custom recovery.
4. Bootloader lock and unlock (Required bootloader key).
5. Flashing logo.bin to remove bootloader warning message.
6. sideload any zip/ROM.
7. Installing ADB & mfastboot driver.
Request:
Please don't add direct download link in your form@Xda or in your website. if you want to add in your thread then
First ask me for permission and after that mention me in your thread and instead of giving download link, direct them to this page for downloading.
Please rate this thread to 5 * so that this tool can be published on XDA Portal
XDA:DevDB Information
Moto All-In-one Tool, Tool/Utility for all devices (see above for details)
Contributors
hard91
Version Information
Status: Stable
Stable Release Date: 2016-09-17
Created 2016-09-17
Last Updated 2016-11-0260Downloads:
Latest:
Link: MOTO ALL-IN-ONE v2.5
Downloaded: 40,300 times
Thanks for liking my work that much
change Note:
1. Flashing Stock ROM For moto Z model updated.
2. Links in log file for this post updated.
MOTO ALL-IN-ONE TOOL v 2.0
change Note:
1. Log File added.
2. while Flashing STOCK ROM, GUI will not hang.
3. For every button script used is added in log file.
4. windows tray icon with message popup added
5. Links for update and SuperSu.zip added.
Bugs:
1. GUI Hangs if you are loading a heavy zip in sideload process(will fix in next update.)
Previous Release:
1. MOTO ALL-IN-ONE TOOL v 2.0 Downloaded 4,400 times
2. MOTO ALL-IN-ONE TOOL v 1.1 a (Driver button Fix) Downloaded 10,280 times
3. MOTO ALL-IN-ONE TOOL v 1.0 Downloaded 1,000 times
Ask me for mirror on any website
Please don't mirror my work as I constantly monitoring my no of downloads which gives me energy to give you constant updates.33How to Section
How to SectionHow to Install Driver
1. Click on Driver.
2. Now Click on ADB & mfastboot Drivers.
3. Now just click Next> Next> button.
4. Do not change Installation directory.
5. After installations please make sure mfastboot.exe, fastboot, adb etc Files are present in installation directory.
6. Done.
Note: Above section is very very important without it this tool will not work.
How to Phone Info
1. Please ensure you have installed ADB & mfastboot Drivers from Driver page.
2. Enable USB debugging option under settings of your Mobile.
3. If there is any Message appears on mobile screen which require authentication to connect PC then click on remember option and Press Ok.
4. Now Click on ADB Devices button. It will show connected device and its serial No.
5. Now click on Get Phone Info to get Information Regarding Phone you currently connected with.
6. Done!
How to Flash STOCK ROM (fastboot flashable) and recover from bricked moto device.
1. Click on Flasher.
2. If you are not in fastboot mode then click on AUTO Button under Reboot into Bootloader Group Box. If you are in mobile bricked stage then manually boot into bootloader.
3. Click on browse button. It will open a dialog to select STOCK fastboot Flashable ROM
4. Go to the path where your STOCK ROM is placed.
5. On selecting STOCK ROM Directory it will show its path under STOCK ROM Path Group Box.
6. If all the basic files are present in the directory then Flash button is enabled otherwise it will give error and show missing files and Disable Flash Button.
7. Select whether you want to lock bootloader or Un-lock bootloader (if bootloader is previously unlocked it will not lock it).
8. Click on Flash button.
9. See Log window.
10. When progress bar reaches to 100% it will show Flashing Done!
11. Your phone will now reboot automatically.
12. Flashing Done!
Note: First boot take 5-10 min. So don’t worry.
How to Flash Stock/Custom Recovery
1. Click on Root/ Recovery.
2. Under Flash recovery Group box click on Browse button.
3. Select your Recovery (twrp, cwm, Stock etc) from opened dialog box.
4. It will show your selected file path in Path line.
5. Click on Flash.
6. Done!
How to Flash custom ROM or Zip using Sideload
1. Click on Root/ Recovery.
2. Under side Load Group box click on Browse button.
3. Select your custom ROM or any fastboot flashable Zip file from opened dialog box.
4. It will show your selected file path in Path line.
5. Click side load.
6. Done!
How to Root any MOTO Device
1. Click on Root/ Recovery.
2. Under Root Group box click on Browse button.
3. Select supersu.zip path from opened dialog box.
4. It will show your selected file path in Path line.
5. Click on Root.
6. Your Phone will reboot into custom recovery which you flashed previously.
7. Under custom recovery click on INSTALL > SDCARD (Internal) > select superuser.zip which you selected in 3rd step.
8. Rooting Done!
NOTE: You have to flash custom recovery first in order to Root.
How to Lock Bootloader
1. Click on Root/ Recovery.
2. Under Lock/Unlock Boot-loader Group box.
3. Click on Lock Button.
4. Done!
NOTE: There is no need of bootloader unlock key while locking bootloader.
How to Unlock Bootloader
1. Click on Root/ Recovery.
2. Under Lock/Unlock Boot-loader Group box.
3. Enter 20 digit bootloader key.
4. Click on Un-Lock.
5. Done!
How to get Unlock Bootloader Key
1. Click on Root/ Recovery.
2. Click on get Moto Key button.
3. It will restart your phone into fastboot and wait for device to respond.
4. A message box will open Read it carefully.
5. Click on show info and copy that string.
6. Now Click on OK to go to MOTO website.
7. Login to the website and paste previously copied string where motorola website say.
8. And click on can I unlock my bootloader?.
9. If yes then you will get Bootloader key in your Email inbox.
10. Now paste above 20 digit bootloader key into Under Lock/Unlock Boot-loader Group box.
11. Click on unlock bootloader button.
12. Done!
NOTE: Please note that all the MOTO Models do not support unlocking bootloader like phones under AT &T and other contract phone. This tool is not created by Rajnikant or Superman. Hence this tool can only automate the adb commands that are used to get bootloader string and unlock bootloader. This tool will not do any kind of magic to unlock your contract Moto device.
How to Remove Bootloader Warning Message
1. Click on Root/ Recovery.
2. Under Flash Logo Group box click on Browse button.
3. Select logo.bin file downloaded from your mobile XDA form.
4. It will show your selected file path in Path line.
5. Click on Flash.
6. Done!
You Have to Download each and every File from your respective XDA Form20F.A.Q Section
Frequently Asked Question
1. Why I am not Replying to your bug reported?
Ans. Because you Quote my whole thread which irritates me.
2. I have XYZ moto device with XYZ Model will your TOOL Unlock my bootloader?
Ans. Please read my how to section and my first post where in Prerequest section I have clearly written that for Unlocking bootloader You need a bootloader key and if your mobile is under any contract which donot let you unlock bootloader then this tool will not work. but if your bootloader can be unlocked then you can use my tool to get bootloader string to paste it in moto website to get 20 digit key.
3. I am not getting reply from Tool ?
Ans. 1. Check whether you have installed drivers.(from driver groupbox)
2.Check your usb-debugging option is enabled and you gave permission on your mobile to remember this PC.
3.Check whether path of the installed drivers is present in your environment variable under PATH, if not present then append it (followed by
4 How To report a bug?
Ans. First be polite,mention me in your comment via @hard91 and Give me detail like Mobile Name(MOTO E,E2015,G,G+ etc) and MODEL (XT 1022, XT 10XX etc), and in next line give your bug Details. and what is possible solution you want and you think.
5. WOW your Tool is great and it works for me how can I help you?
Ans. You can HIT thanks button on my this POST and other posts which helped you and PLEASE TELL ME YOUR MODEL(XT1022 ETC) AND MOBILE NAME(moto E,G,G+,X,PLAY ETC),YOUR COUNTRY AND STATE
