Motorola Fire XT / XT-530 / XT-531 ROOTING / SBFs / Custom ROMs / CWM

Search This thread
By:
Advanced…
Arijit.Ray81

Arijit.Ray81

Senior Member
Jul 23, 2010
914
191
Bangalore
Disclaimer:
I am not responsible for anything that happens to your phone, your computer or anything else while following these instructions. Proceed at your own risk.


NEW ONE CLICK ROOT​

Special Thanks to rootdefyxt320

BAT version
EXE version

SUTLR method​

Downloads:
Here are the apps/files needed for Rooting -
1. SuperOneClick 2.3.3.0
2. SUT LR 1.8.2 (Doesn't seem to be working on 64-bit systems)
3. FXX_PR3_NV.xml and NvDefinition.xml [ATTACHED]

Before Rooting:
Prepare your phone by doing the following:
- Go to Settings > Applications > CHECK "Unknown Sources"
- Go to Settings > Applications > Developer > CHECK "USB Debugging" and "Stay Awake"
- Connect your phone via USB, when prompted DO NOT select USB Mass Storage.
- Extract FXX_PR3_NV.xml and NvDefinition.xml from the attached zip file in to a folder

- Now, install SUT LR, run the app
- Select the FXX_PR3_NV.xml [ensure NvDefinition.xml is also in the same folder as FXX_PR3_NV.xml]
- Your phone will restart.

It does NOT erase anything on the phone, since it only patches the ROM.

Rooting:
After the phone restarts, open SuperOneClick and select root. It will take less than a minute to finish.

Credits & Special Thanks to 7amdoun for the New Instructions.


For Folks for whom the above instructions DO NOT work; please follow instructions at THIS LINK

UPDATE your Phone to the latest FIRMWARE HERE

* YOU CAN UPDATE UNROOTED PHONES ONLY!


Could someone take the initiative to MOD this phone? Create some custom ROMs and Themes? I believe Motorola is not providing an ICS update for this phone but some skilled developers can surely help us get the ICS feel on it. I would appreciate if someone could take their time out and get to work on this. I would extend any help I can give.



Increasing Internal Phone Memory​

Credits to Pianorcar for this.

You need –



Steps –

  1. Download and Install Link2SD on your phone
  2. Backup the existing data on the SD Card
  3. Install MiniTool Partition and open it
  4. Delete the existing Partition on the SD Card
  5. Right Click on the “Unallocated” SD Card once again and select “Create”
  6. Create a “Primary Partition”, File System as ”Fat32” and specify the “Partition Size”
  7. Click OK
  8. Right Click on the remaining “Unallocated” space
  9. Create a “Primary Partition”, File System as “Ext2”
  10. Click OK
  11. Start Link2SD and select Ext2
  12. Restart your phone
  13. Start Link2Sd again
  14. The SD Card should now be mounted and you can click “Create Link” on the apps you want to send to the SD Card
  15. The App now will be completely moved to the SD Card

1.jpg 2.jpg


Which apps to safe to move to SD? Look HERE
Thanks to Kammii


Increase SD Card Speed up to 200%​

Required -



  1. Run SD Tools and test the speed of your SD Card
  2. Open SD Speed Increase and move the slider to 1024
  3. Save the Setting
  4. Now Run SD Tools again and test if the speed has increased
  5. Try different settings with SD Speed Increase and save the best setting to start at boot.
* 2048 worked best for me.




SBFs for Motorola Fire XT 530/531​
NOT Custom ROMs​


You would need RSD Lite 5.6 to flash the SBFs.

*NOTE: Chinese ROM does NOT have Google apps, Market. European ROM has everything

European 2.3.5: DMP-4480-0-4017-A01_RFM


Latin American SBFs:
Claro
Entel

Chinese 2.3.5: DMP-4480-0-7009-A02_RFM

Another ROM - DMP-454A-0-2010-A03_RFM(RETAIL) - Suggested by cmndst. Claims are that the ROM is excellent. I have not tried it personally so I leave it up to you folks to try and comment about it.

Credits & Special Thanks to 7amdoun for the SBFs.




CUSTOM ROM HERE​









Here is how you can flash CWM​
 

Attachments

  • FXX_PR3_NV.zip
    65 KB · Views: 9,645
  • RSDLite5.6.rar
    4.4 MB · Views: 7,530
Last edited:
  • Like
Reactions: kalel_1987, fanghongjian, mentose and 61 others
Sort by date Sort by votes
Y

YaduXGT

Senior Member
Apr 16, 2012
51
3
Bangalore
Upvote 0 Downvote
T

tsakaritas

Member
Apr 4, 2011
24
0
Hello guys,
i am connecting my motorola fire xt and i am going to flash ICJ V2 but it says that device not found. what i have to do ?
 
Last edited:
Upvote 0 Downvote
vvk30

vvk30

Senior Member
Oct 11, 2012
143
44
Belgaum
It's not exactly 4.1 .. ICJ is still gingerbread themed to look like jb :D
And I think u need to try installing it on a win7 32bit PC

Sent from my Nexus 4 using xda app-developers app
 
Upvote 0 Downvote
zhalx

zhalx

Senior Member
Nov 10, 2012
298
454
Visit Indonesia
bit.ly
dear dev and xt user who still concern of our device future development, please send me text on my whatsapp +6281510112701.



current member

jaafar - Jordan - developer,

andrewidya - Indonesia - cwm team, linux master,

inyong/supriyadi - indonesia - java scripter

memmoz - Egypt - UI designer and modder



regards

zhalx

Sent from my XT531 using xda app-developers app
 

Attachments

  • uploadfromtaptalk1386245088595.jpg
    uploadfromtaptalk1386245088595.jpg
    42.3 KB · Views: 164
Upvote 0 Downvote
A

aquared

Member
Dec 2, 2008
18
5
Anyone has any stock or custom firmware with GREEK language for XT530? cwm recovery flash or sbf file. DMP-4460-0-4053-A04_RFM (4_460_4053) was the original firmware.
 
Upvote 0 Downvote
You must log in or register to reply here.

Similar threads

S
[Q] Root for Asus Fonepad
Replies
2K
Views
1M
Willjoe2442
Willjoe2442
Boskan
All about HUAWEI Ascend Y530 (Q&A, Root,Unlocking, etc)
Replies
4K
Views
1M
V
vista_user
Q
Rooting the ASUS Memo Pad HD 7 (ME173x)
Replies
849
Views
600K
Willjoe2442
Willjoe2442
DallasCZ
[Q] ZTE V5 Red Bull V9180 WCDMA 2GB RAM, 8GB ROM- root, cwm
Replies
2K
Views
330K
R
radpaikar
s7yler
[How to/MTK65xx] ROOT, Backup & Flash (MTKDroidTools, Spflashtool, CWM) [MTK Only]
Replies
81
Views
274K
R
ramunsa

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 64
    Arijit.Ray81
    Arijit.Ray81
    Disclaimer:
    I am not responsible for anything that happens to your phone, your computer or anything else while following these instructions. Proceed at your own risk.


    NEW ONE CLICK ROOT​

    Special Thanks to rootdefyxt320

    BAT version
    EXE version

    SUTLR method​

    Downloads:
    Here are the apps/files needed for Rooting -
    1. SuperOneClick 2.3.3.0
    2. SUT LR 1.8.2 (Doesn't seem to be working on 64-bit systems)
    3. FXX_PR3_NV.xml and NvDefinition.xml [ATTACHED]

    Before Rooting:
    Prepare your phone by doing the following:
    - Go to Settings > Applications > CHECK "Unknown Sources"
    - Go to Settings > Applications > Developer > CHECK "USB Debugging" and "Stay Awake"
    - Connect your phone via USB, when prompted DO NOT select USB Mass Storage.
    - Extract FXX_PR3_NV.xml and NvDefinition.xml from the attached zip file in to a folder

    - Now, install SUT LR, run the app
    - Select the FXX_PR3_NV.xml [ensure NvDefinition.xml is also in the same folder as FXX_PR3_NV.xml]
    - Your phone will restart.

    It does NOT erase anything on the phone, since it only patches the ROM.

    Rooting:
    After the phone restarts, open SuperOneClick and select root. It will take less than a minute to finish.

    Credits & Special Thanks to 7amdoun for the New Instructions.


    For Folks for whom the above instructions DO NOT work; please follow instructions at THIS LINK

    UPDATE your Phone to the latest FIRMWARE HERE

    * YOU CAN UPDATE UNROOTED PHONES ONLY!


    Could someone take the initiative to MOD this phone? Create some custom ROMs and Themes? I believe Motorola is not providing an ICS update for this phone but some skilled developers can surely help us get the ICS feel on it. I would appreciate if someone could take their time out and get to work on this. I would extend any help I can give.



    Increasing Internal Phone Memory​

    Credits to Pianorcar for this.

    You need –



    Steps –

    1. Download and Install Link2SD on your phone
    2. Backup the existing data on the SD Card
    3. Install MiniTool Partition and open it
    4. Delete the existing Partition on the SD Card
    5. Right Click on the “Unallocated” SD Card once again and select “Create”
    6. Create a “Primary Partition”, File System as ”Fat32” and specify the “Partition Size”
    7. Click OK
    8. Right Click on the remaining “Unallocated” space
    9. Create a “Primary Partition”, File System as “Ext2”
    10. Click OK
    11. Start Link2SD and select Ext2
    12. Restart your phone
    13. Start Link2Sd again
    14. The SD Card should now be mounted and you can click “Create Link” on the apps you want to send to the SD Card
    15. The App now will be completely moved to the SD Card

    1.jpg 2.jpg


    Which apps to safe to move to SD? Look HERE
    Thanks to Kammii


    Increase SD Card Speed up to 200%​

    Required -



    1. Run SD Tools and test the speed of your SD Card
    2. Open SD Speed Increase and move the slider to 1024
    3. Save the Setting
    4. Now Run SD Tools again and test if the speed has increased
    5. Try different settings with SD Speed Increase and save the best setting to start at boot.
    * 2048 worked best for me.




    SBFs for Motorola Fire XT 530/531​
    NOT Custom ROMs​


    You would need RSD Lite 5.6 to flash the SBFs.

    *NOTE: Chinese ROM does NOT have Google apps, Market. European ROM has everything

    European 2.3.5: DMP-4480-0-4017-A01_RFM


    Latin American SBFs:
    Claro
    Entel

    Chinese 2.3.5: DMP-4480-0-7009-A02_RFM

    Another ROM - DMP-454A-0-2010-A03_RFM(RETAIL) - Suggested by cmndst. Claims are that the ROM is excellent. I have not tried it personally so I leave it up to you folks to try and comment about it.

    Credits & Special Thanks to 7amdoun for the SBFs.




    CUSTOM ROM HERE​









    Here is how you can flash CWM​
    View
    10
    Kammii
    Kammii
    Jiggerica said:
    What system apps you convert to sd card? (what is etc.....?) Any problems with your phone?

    Thanks a lot!
    Click to expand...
    Click to collapse

    Edit: Just realised that you may not know what the abbreviation "etc" means. If that's the case, it is an abbreviation for the term et cetera, which means "and other things" or "and so forth".

    No problems with my phone so far. I just avoid tampering with system apps that may cause irreversible problems (such as Android System, Settings, and MotoSwitch). Some system apps are no longer functional, but they can easily be made functional again by using Link2SD to "remove link" and convert them back to system apps.

    I now have 105MB of free internal storage (with 52MB used).

    Also, note that you want to use the "Create link" function in Link2SD not "Move to SD card". "Move to SD card" uses the system's native apps2sd method which is not as effective as that of Link2SD's.

    To give you an idea of things, here's a list of what system apps I've converted to user apps and have linked to the SD card and how they've been affected:
    • Browser – No longer functional. Opens but does not load webpages. That's easily reversed via Link2SD and then becomes fully functional again.
    • Email – No longer works. At start-up, I get a message that it has crashed. Easily reversed.
    • FM Radio – Works as normal.
    • FQC program – I believe this is an app used for quality checking at the factory, so I've never used it.
    • Gmail – Works as normal.
    • Google Play Store – Appears to work as normal.
    • Maps – Works as normal.
    • Moto [Chinese characters] (com.motorola.inputmethod.gpinyin) – Never used it, so don't know.
    • Moto Smart Handwriting – Never used it, so don't know.
    • News & Weather – No longer functional. Opens but does not work.
    • People Centric – No longer functional. When trying to add the widget, it places a message as the widget stating "Problem loading widget".
    • Qik Video – Never used it, but it fails to open. So it's no longer functional.
    • RSS Reader – No longer functional.
    • Street View – Never used it.
    • Swype – Can still be used. Just need to go into Language & Keyboard settings and tick it.
    • Talk – Appears to work as normal.
    • Voice Search – Works as normal.
    • Weather – Fully functional. Widget can still be added to home screen and used without problem.
    • YouTube – No longer functional.
    View
    8
    D
    Dr. Hurt
    I just can't believe this!!!

    I just found out that the GPU on our phone is disabled by default :( :( :(

    Force enabling it gave me "unbelievably" smooth graphics. Text no longer fades and blurs while scrolling. Also, the occasional lag I get while playing some games seems to have gone.

    However, the graphics drivers are very old and buggy which causes major graphics artefacts. Thats probably the reason Motorola has disabled the GPU.

    Motorola, in their ultimate wisdom, decided to disable the GPU altogether instead of updating the kernel, and adreno200 libs

    To try this, change the following in build.prop:

    debug.composition.type=mdp
    to
    debug.composition.type=gpu
    Click to expand...
    Click to collapse

    NB: screen will keep turning white while navigating thru system menus. Taping the screen will bring it back to life.

    And before someone asks, no we can't update the libs either as they require the Gingerbread kernel (.35) while we have the Froyo kernel (.32)
    View
    6
    D
    Dr. Hurt
    Some SBFs

    NB:
    To flash those, use RSD Lite 5.6
    Chinese ROM does NOT have Google apps, Market. European ROM has everything

    European 2.3.5:
    DMP-4480-0-4017-A01_RFM
    http://www.mediafire.com/?h73a80xuhs0ii8j

    Chinese 2.3.5:
    DMP-4480-0-7009-A02_RFM
    http://www.mediafire.com/?20qf909peofbodn

    Latin American SBFs:
    [Claro] http://www.grupoandroid.com/topic/41195-firmware-spice-xt531-claro-chile-gingerbread/

    [Entel] http://www.grupoandroid.com/topic/40427-firmware-spice-xt531-entel-chile-gingerbread/
    View
    6
    D
    Dr. Hurt
    Cyanogen 9 has finally been ported to the Galaxy Ace.
    Since our Fire XT and the Ace use the same hardware (Chipset, CPU, and Graphics), porting this ROM to our phone will be very easy.

    Once Cyanogen 9 is officially released and cyanogen 9 for Ace is updated and stabilized, I might (if I have time) start creating a Custom Recovery for our phone. Hopefully the ROM itself won't need too much work to make it fully functional.


    http://forum.xda-developers.com/showthread.php?t=1490867
    View

New posts