Motorola G Power (2022) (TONGA)

Search This thread

T_Tank

Senior Member
Nov 23, 2013
64
5
Ended up flashing back to stock due to tmo USA being unstable sometimes it get stuck on edge or no signal, messed with the Sim tray to see if it was a hardware issue but it works completely normal on stock
 

Quantumstate

Senior Member
Feb 6, 2010
885
117
I'm seeing references to cherish, Octivi-OS, corvus, etc. Where are you guys finding this firmware for Tonga?

And what is "GSI"?
 

Yeedatoy

Senior Member
Jul 18, 2018
340
134
38
Charlotte
AT&T HTC One X
Moto G6
Flashed a12 Retail over boost. Downloaded G22 system apps and changed the stupid stock CPU sets.
 

Attachments

  • Screenshot_20221119-121009.png
    Screenshot_20221119-121009.png
    363.9 KB · Views: 46
  • Screenshot_20221119-180135.png
    Screenshot_20221119-180135.png
    88.6 KB · Views: 43
  • Screenshot_20221119-111851.png
    Screenshot_20221119-111851.png
    367 KB · Views: 42
  • Screenshot_20221119-111907.png
    Screenshot_20221119-111907.png
    1.8 MB · Views: 38
  • Screenshot_20221119-114217.png
    Screenshot_20221119-114217.png
    168 KB · Views: 39
  • Screenshot_20221119-180628.png
    Screenshot_20221119-180628.png
    73.2 KB · Views: 43

grumbleson

New member
Nov 24, 2022
1
0
So I got the tonga about a week ago, bootloader unlocked rooted with magisk and firmware flashed all successful without a hiccup.

But every time I go to flash the pixel 12 or an alternate GSI of the same criteria everything works up until when it's flashing the system it fails that trunk four of 12, and when I try and flash a different GSI it too freezes at chunk four of 11. This is my daily driver so after messing up I always got to reflash the new firmware and start from scratch. Does anybody have any clue what it might be? Could it possibly be the drivers on my windows 11 laptop? That's the only thing I can think of unless I'm missing something.

I installed the GSI according to the directions up top. And ain't no help will be greatly appreciated thank you.

I thought I posted about this earlier so if it's a double post if I notice it all fall back and delete it.
I'm having the exact same problem you were. Everything works until I'm flashing the GSI and it fails at chunk four of 12. I tried to flash a different GSI and it failed at chunk four of 11.

Do you happen to remember how you solved it?
 

Yeedatoy

Senior Member
Jul 18, 2018
340
134
38
Charlotte
AT&T HTC One X
Moto G6
I'm having the exact same problem you were. Everything works until I'm flashing the GSI and it fails at chunk four of 12. I tried to flash a different GSI and it failed at chunk four of 11.

Do you happen to remember how you solved it?
Flashing the gsi fails or flashing stock firmware? Doesn't the gsi just flash a system img? There shouldn't be any sparse Img chunks I thought? Are you in fastboot or fastbootD? Fastboot can flash everything except for the img chunks, you have to be in fastbootD to flash them. Only other thing in can think of is the Gsi is too large for the partition
 

jumpup

Senior Member
Kernel Update!!

TMO and Boost Mobile has an update for December 2021

I extracted the boot.img from the newest firmware and noticed a November security patch and performance boost.

Out of the box this phone was laggy and felt like a 100 dollar phone. Now with Android 12, an updated kernel and keeping refresh rate at 90mhz. This phone feels just as fast as the stylus 5G 480 soc. This mediatek Helio G37 is not that bad once it's overclocked ..
I set governor to "performance'
CPU min Big clusters 2.3ghz
Little clusters 1.8ghz
I can't find a way to overclock the GPU yet.
GPU high frequency is 650mhz. Similar to stylus 5 g..View attachment 5529585
Running smooth with Great battery life..
Dang, I didn't even think about a custom kernel for the tonga, too. Thanks for that idea!
 
  • Like
Reactions: jhjhjhjhjhjh

donjan3

Member
Apr 23, 2015
9
0
Moto G Power (2021)
Hello there,
I just got this device Motorola g power 2022 (Build number: S3QS32.20-42-10-2) as a back up phone, its rooted but hard to find a working twrp recovery that compatible or i haven't been on this for a long times and i missing something.
 

Yeedatoy

Senior Member
Jul 18, 2018
340
134
38
Charlotte
AT&T HTC One X
Moto G6
Hello there,
I just got this device Motorola g power 2022 (Build number: S3QS32.20-42-10-2) as a back up phone, its rooted but hard to find a working twrp recovery that compatible or i haven't been on this for a long times and i missing something.
No, there is no twrp. Just use magisk Delta with boot loop protection built in. If you flash a bad module, boot the phone into safe mode and then reboot it and all your modules will be automatically turned off so you can remove the bad module
 
  • Like
Reactions: WarriorMarth

Viva La Android

Recognized Contributor
Jul 31, 2019
1,347
589
Northeastern Tennessee
LG G Pad 8.3
Moto G
Been away for a while. Think I'll start tinkering again. Got this phone on boost
Good to see you on the forums again @madbat99. Question for you...you may have knowledge of this. I was going to write up a full rooting guide for the Tonga, but I don't want to duplicate somebody else's work. I searched and was unable to find a rooting thread for Tonga here on XDA. By chance, have you ran across any such threads? Thanks
 

Top Liked Posts

  • There are no posts matching your filters.
  • 3
    Hey bro can you do me a favor have you tested it all completely out for bugs? Let me know which ones there are if any... Also what process did you use did you use fastboot flash system_a?
    Read this to the "T'.

    Install Android 12 Pixel GSI instructions:
    1 Unlocked bootloader
    2 Windows laptop or CPU
    3Your Region Stock "Tonga" firmware from lolinet.. and the PIXEL 12 GSI firmware from GitHub. Product.img file to resize the GSI (see attachment)
    Open two folders on computer and put Tonga stock firmware in one and the GSI 12 ROM in the other folder along with the product.img file and the vbmeta.img from your stock firmware.
    4.Turn off device and on the computer open a command prompt inside the Stock firmware folder.
    5.While Holding "volume down" connect phone to computer you'll be in fastboot mode.
    6 Flash stock firmware using these commands. Just copy and paste into the command prompt.
    (After about 10 minutes phone will reboot to stock welcome screen)
    This is Metro by T-Mobile so if using a different stock firmware only difference is the number of (super.img_sparsechunk) so check your stock firmware folder and add or delete any super.img_sparsechunks commands if necessary...you see Metro by TMobile has "24" of them..

    fastboot set_active a
    fastboot flash preloader preloader.img
    fastboot flash lk lk.img
    fastboot flash tee tee.img
    fastboot flash scp scp.img
    fastboot flash sspm sspm.img
    fastboot flash dtbo dtbo.img
    fastboot flash logo logo.img
    fastboot flash spmfw spmfw.img
    fastboot flash scp scp.img
    fastboot flash vbmeta vbmeta.img
    fastboot flash vbmeta_system vbmeta_system.img
    fastboot flash md1img md1img.img
    fastboot flash gz gz.img
    fastboot flash boot boot.img
    fastboot flash super super.img_sparsechunk.0
    fastboot flash super super.img_sparsechunk.1
    fastboot flash super super.img_sparsechunk.2
    fastboot flash super super.img_sparsechunk.3
    fastboot flash super super.img_sparsechunk.4
    fastboot flash super super.img_sparsechunk.5
    fastboot flash super super.img_sparsechunk.6
    fastboot flash super super.img_sparsechunk.7
    fastboot flash super super.img_sparsechunk.8
    fastboot flash super super.img_sparsechunk.9
    fastboot flash super super.img_sparsechunk.10
    fastboot flash super super.img_sparsechunk.11
    fastboot flash super super.img_sparsechunk.12
    fastboot flash super super.img_sparsechunk.13
    fastboot flash super super.img_sparsechunk.14
    fastboot flash super super.img_sparsechunk.15
    fastboot flash super super.img_sparsechunk.16
    fastboot flash super super.img_sparsechunk.17
    fastboot flash super super.img_sparsechunk.18
    fastboot flash super super.img_sparsechunk.19
    fastboot flash super super.img_sparsechunk.20
    fastboot flash super super.img_sparsechunk.21
    fastboot flash super super.img_sparsechunk.22
    fastboot flash super super.img_sparsechunk.23
    fastboot flash super super.img_sparsechunk.24
    fastboot erase carrier
    fastboot erase userdata
    fastboot erase metadata
    fastboot -w
    fastboot reboot

    Ready to flash Android 12 let's go!!!!

    After you see welcome screen turn off device.

    1.Open Pixel GSI 12 folder and open a command prompt inside the folder
    2Connect phone to PC and put back into fastboot mode.
    3Copy and paste these commands to flash the ROM .(Note the GSI you download and unzip the name will be pixel..ab..slim....img..Rename it to "system.img")

    fastboot set_active a
    fastboot reboot fastboot
    fastboot flash product product_gsi.img
    fastboot flash system system.img
    fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
    fastboot -w
    fastboot reboot

    After about 10 minutes you will boot up to Android 12 Pixel ROM. Yay..

    Now to get Bluetooth ,VOLTE,MMS and SMS working follow these instructions.

    1.Go through the set up screen and set up everything "offline" uncheck all options .
    2 Go into settings and look for "PHH Treble Settings" (Magic happens here) lol
    Go to "MISC Features and check these three boxes for Bluetooth fix

    "Use alternative way to detect headset.."
    "Force -disable A2DP offlload"
    Option called Bluetooth Workaround( check Mediatek)

    LTE VOLTE FIX
    PHH Treble settings
    3 Go to "IMS Features" and check the last two boxes then hit "install ims for Mediatek.." then lastly hit "create ims apn"
    4 once the ims apk downloads, manually install it from the notification drop down. (Don't reboot if it says to)
    5. Open stock GSI ROM phone dialer and type
    *#*#4636#*#* Three options will appear choose 'phone information"
    6 Change data option using the little arrow drop down to (GSM WCDMA LTE (PRL) see full image.
    7 Reboot phone,,,, Once rebooted go to mobile data settings and check the VOLTE options... ...Now test calls and text you should have VOLTE BLUETOOTH in call voice, MMS,SMS everything working like me...
    8 Root if you want ,,same way just patch the boot image with magisk manager 23 or 24. And fastboot flash the magisk boot.img.
    Profit... Now set up your phone to your liking.
    Screenshot_20220205-053444_Photos.png
    Screenshot_20220205-081700_Settings.png
    3
    Product.img to resize any GSI to fit any device.

    Oh I have no bugs to report.
    Zero!!!
    1
    Moto G Power 2022
    Picked up this phone free.
    Rootable with 90hz display
    R/w with magisk root
    Dolby viper all work

    On MetrobyT-mobile but was able to flash
    "Retus" firmware no issues..link

    1
    Pixel 12 GSI 100% working on this phone.

    ATTENTION please ATTENTION please!!!!


    I new this GSI rom

    was special. I decided to get a free Motorola G Power (2022) (Tonga) from MetroPCS and after root I said I remember reading LTE and mediatek phones were having less issues.

    So I said I'll flash this on my new moto g Power 2022 and wow ... VOLTE works... Bluetooth... everything....yessssssss!!

    Forget my stylus 5 G and 5G ace this is my new daily driver....View attachment 5525479
    Send me your stylus 5g 🤣😂
    Just joking, congratulations 👍

    On another note, this isnt the right place for your device. Looks like a forum hasnt been created yet for the 2022 g power.
    1
    Bonus !!!!!Android Auto works on this rom
    First rom I ever had that supported AA

    Geekbench on a11 single core "183" mulitcore "983. Now on A12 look at the boost jump Single ""814 Multi "3160..
    Screenshot_20220202-004850_Geekbench 4.png
    Screenshot_20220206-183602_System UI.png
    Screenshot_20220206-183642_System UI.png