[Motorola] Moto All-In-one Tool v1.1

hard91

Senior Member
Nov 18, 2012
561
910
133
30
PATIALA
MOTO All-In-one Tool

Supported Model:
Any moto device

Pre-Required:
1. Windows OS
2. STOCK ROM For flashing.
3. Supersu.zip for rooting.
4. Bootloader Key to unlock bootloader.
5. Stock Recovery for flashing.

Downloads:
*In next Post

Bugs:
1. GUI hangs if you press anything during flashing. So avoid touching anything once flash button pressed.{fixed in next update}
2. You tell :confused::cyclops:

Features:
1. Flashing stock rom on any Motorola Device (Any model).
2. Root through superuse.zip.
3. custom recovery.
4. Bootloader lock and unlock (Required bootloader key).
5. Flashing logo.bin to remove bootloader warning message.
6. sideload any zip/ROM.
7. Installing ADB & mfastboot driver.

Request:
Please don't add direct download link in your [email protected] or in your website. if you want to add in your thread then
First ask me for permission and after that mention me in your thread and instead of giving download link, direct them to this page for downloading.

Please rate this thread to 5 * so that this tool can be published on XDA Portal

XDA:DevDB Information
Moto All-In-one Tool v1.1, Tool/Utility for the Moto Z

Contributors
hard91

Version Information
Status: Stable
Current Stable Version: v1.0
Stable Release Date: 2016-06-12

Created 2016-06-13
Last Updated 2016-06-16
 
Last edited:

hard91

Senior Member
Nov 18, 2012
561
910
133
30
PATIALA
Guide

How to Section
How to Install Driver
1. Click on Driver.
2. Now Click on ADB & mfastboot Drivers.
3. Now just click Next> Next> button.
4. Do not change Installation directory.
5. After installations please make sure mfastboot.exe, fastboot, adb etc Files are present in installation directory.
6. Done.

Note: Above section is very very important without it this tool will not work.

How to Phone Info
1. Please ensure you have installed ADB & mfastboot Drivers from Driver page.
2. Enable USB debugging option under settings of your Mobile.
3. If there is any Message appears on mobile screen which require authentication to connect PC then click on remember option and Press Ok.
4. Now Click on ADB Devices button. It will show connected device and its serial No.
5. Now click on Get Phone Info to get Information Regarding Phone you currently connected with.
6. Done!

How to Flash STOCK ROM (fastboot flashable) and recover from bricked moto device.
1. Click on Flasher.
2. If you are not in fastboot mode then click on AUTO Button under Reboot into Bootloader Group Box. If you are in mobile bricked stage then manually boot into bootloader.
3. Click on browse button. It will open a dialog to select STOCK fastboot Flashable ROM
4. Go to the path where your STOCK ROM is placed.
5. On selecting STOCK ROM Directory it will show its path under STOCK ROM Path Group Box.
6. If all the basic files are present in the directory then Flash button is enabled otherwise it will give error and show missing files and Disable Flash Button.
7. Select whether you want to lock bootloader or Un-lock bootloader (if bootloader is previously unlocked it will not lock it).
8. Click on Flash button.
9. See Log window.
10. When progress bar reaches to 100% it will show Flashing Done!
11. Your phone will now reboot automatically.
12. Flashing Done!

Note: First boot take 5-10 min. So don’t worry.

How to Flash Stock/Custom Recovery

1. Click on Root/ Recovery.
2. Under Flash recovery Group box click on Browse button.
3. Select your Recovery (twrp, cwm, Stock etc) from opened dialog box.
4. It will show your selected file path in Path line.
5. Click on Flash.
6. Done!

How to Flash custom ROM or Zip using Sideload
1. Click on Root/ Recovery.
2. Under side Load Group box click on Browse button.
3. Select your custom ROM or any fastboot flashable Zip file from opened dialog box.
4. It will show your selected file path in Path line.
5. Click side load.
6. Done!


How to Root any MOTO Device
1. Click on Root/ Recovery.
2. Under Root Group box click on Browse button.
3. Select supersu.zip path from opened dialog box.
4. It will show your selected file path in Path line.
5. Click on Root.
6. Your Phone will reboot into custom recovery which you flashed previously.
7. Under custom recovery click on INSTALL > SDCARD (Internal) > select superuser.zip which you selected in 3rd step.
8. Rooting Done!

NOTE: You have to flash custom recovery first in order to Root.

How to Lock Bootloader
1. Click on Root/ Recovery.
2. Under Lock/Unlock Boot-loader Group box.
3. Click on Lock Button.
4. Done!

NOTE: There is no need of bootloader unlock key while locking bootloader.

How to Unlock Bootloader
1. Click on Root/ Recovery.
2. Under Lock/Unlock Boot-loader Group box.
3. Enter 20 digit bootloader key.
4. Click on Un-Lock.
5. Done!

How to get Unlock Bootloader Key
1. Click on Root/ Recovery.
2. Click on get Moto Key button.
3. It will restart your phone into fastboot and wait for device to respond.
4. A message box will open Read it carefully.
5. Click on show info and copy that string.
6. Now Click on OK to go to MOTO website.
7. Login to the website and paste previously copied string where motorola website say.
8. And click on can I unlock my bootloader?.
9. If yes then you will get Bootloader key in your Email inbox.
10. Now paste above 20 digit bootloader key into Under Lock/Unlock Boot-loader Group box.
11. Click on unlock bootloader button.
12. Done!

NOTE: Please note that all the MOTO Models do not support unlocking bootloader like phones under AT &T and other contract phone. This tool is not created by Rajnikant or Superman. Hence this tool can only automate the adb commands that are used to get bootloader string and unlock bootloader. This tool will not do any kind of magic to unlock your contract Moto device.

How to Remove Bootloader Warning Message
1. Click on Root/ Recovery.
2. Under Flash Logo Group box click on Browse button.
3. Select logo.bin file downloaded from your mobile XDA form.
4. It will show your selected file path in Path line.
5. Click on Flash.
6. Done!

You Have to Download each and every File from your respective XDA Form
 

XperianceIT

Senior Member
Jan 7, 2012
409
71
0
are the drivers included in the AIO Tool? For some reason I cant download the Tool from the provided link, my laptop hates mediafire, so I am having to hunt for it seperately. I found the MOTO AIO Tool, and another program for ADB called minimal ADB/Fastboot.
 

joshw0000

Senior Member
Jun 15, 2010
3,984
402
0
Has anyone tried this on a Moto Z? I assume the Verizon variant has a locked bootloader and the Motorola version will be unockable.

Sent from my XT1575 using Tapatalk
 

Ace2cool

Member
Dec 24, 2012
36
12
0
Murfreesboro, TN
Verizon's bootloader is locked on both the Z and the Force. You can get to the dev options through the usual taps, but when you unlock the bootloader with the toggle, nothing happens. It's gonna take some cracking to get into it. There are 3 quadrooter exploits that someone better than me at coding might be able to get into, but knowing big red, it might not happen. I think the mods aspect of it may spur action, but the outlook is bleak on the force forum.
 
  • Like
Reactions: jrock77420

nesgcmx

Member
Dec 29, 2012
26
1
0
México DF
Dind't work for me, i've installed the drivers following the intructions but, the tool don't recognize my phone and i get this message "adb is not recognized as an internal or external command" same for fastboot , i already unlocked the bootloader following the intructions on motorola site.
 

hard91

Senior Member
Nov 18, 2012
561
910
133
30
PATIALA
Dind't work for me, i've installed the drivers following the intructions but, the tool don't recognize my phone and i get this message "adb is not recognized as an internal or external command" same for fastboot , i already unlocked the bootloader following the intructions on motorola site.
Try updated v 2.0


Sent from my CP8298_I00 using XDA-Developers mobile app
 
  • Like
Reactions: jrock77420

nesgcmx

Member
Dec 29, 2012
26
1
0
México DF
Hello again and apologize for the late reply, I have managed to make the program see my phone but now when trying to flash a rom stock gives me a message saying NULLmotoboot.img and does not allow me to flash the system, I have reviewed the rom files and .img file that does not come within the rom.
 

hard91

Senior Member
Nov 18, 2012
561
910
133
30
PATIALA
Hello again and apologize for the late reply, I have managed to make the program see my phone but now when trying to flash a rom stock gives me a message saying NULLmotoboot.img and does not allow me to flash the system, I have reviewed the rom files and .img file that does not come within the rom.
Send me list of file in zip folder and your model detail

Sent from my CP8298_I00 using XDA-Developers mobile app
 
  • Like
Reactions: jrock77420