MT6592 JTY Model N111 (KT107) Mtk_Droid_Tool stuck - root attempts failed

[hari.st]

I'm new to Android. My chinese JTY Model N111 (KT107) only has 1GB of RAM which e.g. causes choppy playback of iOS mov files.
Besides this it has lots of china chunk that can't be disabled properly
Therefore I'd like to use Roehsoft RAM-Expander (SWAP) which requires root.

My specs:
http://specdevice.com/showspec.php?id=00de-2520-ffff-fffff1109570

Mediathek MT6592, 8x ARM cortex A7 @2Ghz,

Device: Manufact JTY, Model N111 (KT107)
Kernel 3.10.72+

I'm currently trying this without success:
How to Root every MTK China Phone - Readback With SP-Flash - Root + CWM on INEW V8 [HD]
https://www.youtube.com/watch?v=s66e-kwvKUU

I could solve these problems:
- PDAnet ADB driver didn't recognize device. I used VCOM usb driver for win 10 (worked)
- Mtk_Droid_Tool_v2.5.3 didn't recognize phone, I used MTKDROIDTOOLS-FIX-1.1 from here https://forum.xda-developers.com/android/general/fix-impossible-to-start-adb-error-t3582571 (worked)

However I've the following problems:
1. Error messages
--- ERROR : --- TotalBytesPerChunk Not Found. Set default Page/Spare=2048/64 !!!
ATTENTION! File /system/recovery-from-boot.p which restore factory recovery in case of phone switching on in a normal mode Is Found!
(see attachment)

I tried different MTKdroidtool versions from different sources, there is plenty of internal mem and SD card mem

2.
Blocks map displays create scatter file greyed out: I'm unable to create a scatter file to store my current rom on HD

3.
engineering mode: user2root missing
*#*#3646633#*#*
shows engineering mode but Log and Debugging there is user2root button!
I tried to update Engineering Mode from playstore without success

4.
A desparate trial of RootGenius_en_3.1.3 caused me an unable to root error.



--> What can I do to store my current rom on a laptop to restore it if something happens?
--> How can I gain root access for my device?
--> Is there a faster alternative to add some RAM than with Roehsoft RAM-Expander?

Thank you very much for your help!

 

[hari.st]

I found out that it's actually MT6580 and not MT6592.

I created a scatter file by Miracle Box 2.58 and read the ROM to HD

MTK root attempt with Miracle Box failed.

However using SP_Flash_Tool_v5.1824 I could not read back rom with scatter file from miracle box:
Mtk_Droid_Tool_v2.5.3 reported an error if I try to process file ROM_ from flash Tool.

Read back Rom from Miracle box apparently worked. How can I use this to root my device?


Hardware:mt6580
Board:
CPU ABI:armeabi-v7a
Manufacturer:jty
Model:n111
Android Ver:7.1
bootloader ver:unknown
USB config:mtp,adb
User:azhuo
FS:unknown
Baseband ver:moly.wr8.w1449.md.wg.mp.v23, 2016/06/17 13:38
Build number:kt107_v01
ID:lmy47i
Chipset:mt6580
Root: Not Root Connected to Phone.
CPU: MT6580 SW:0000 Ver: CA00
Downloading Boot8 ...
EMMC Size: 0x03AB800000
Flash Type: EMMC
INT/EXT RAM Size: 0x20000/0x40000000
Reading infr(EMMC)...
BT_ADDR:000046658001
WIFI MAC:000000000000
IMEI1:355456101986240
IMEI2:355457101987009
id:KT107_V01
version:7.1
model:N111
brand:IP
manufacturer:JTY
PROINFO BaseAddr:0x80000 Size:0x300000
NVRAM BaseAddr:0x380000 Size:0x500000
PROTECT1 BaseAddr:0x880000 Size:0xA00000
PROTECT2 BaseAddr:0x1280000 Size:0xA00000
SECCFG BaseAddr:0x1C80000 Size:0x40000
ITEMS BaseAddr:0x1CC0000 Size:0x100000
LK BaseAddr:0x1DC0000 Size:0x60000
BOOT BaseAddr:0x1E20000 Size:0x1000000
RECOVERY BaseAddr:0x2E20000 Size:0x1000000
PARA BaseAddr:0x3E20000 Size:0x80000
LOGO BaseAddr:0x3EA0000 Size:0x800000
EXPDB BaseAddr:0x46A0000 Size:0xA00000
FRP BaseAddr:0x50A0000 Size:0x100000
NVDATA BaseAddr:0x51A0000 Size:0x2000000
METADATA BaseAddr:0x71A0000 Size:0x2660000
OEMKEYSTORE BaseAddr:0x9800000 Size:0x200000
SECRO BaseAddr:0x9A00000 Size:0x600000
KEYSTORE BaseAddr:0xA000000 Size:0x800000
SYSTEM BaseAddr:0xA800000 Size:0x80000000
CACHE BaseAddr:0x8A800000 Size:0x10000000
USERDATA BaseAddr:0x9A800000 Size:0x30FF80000
FLASHINFO BaseAddr:0x3AA780000 Size:0x1000000

 

[Cheosaul]

Please help me :c

I'm new to Android. My chinese JTY Model N111 (KT107) only has 1GB of RAM which e.g. causes choppy playback of iOS mov files.
Besides this it has lots of china chunk that can't be disabled properly
Therefore I'd like to use Roehsoft RAM-Expander (SWAP) which requires root.

My specs:
http://specdevice.com/showspec.php?id=00de-2520-ffff-fffff1109570

Mediathek MT6592, 8x ARM cortex A7 @2Ghz,

Device: Manufact JTY, Model N111 (KT107)
Kernel 3.10.72+

I'm currently trying this without success:
How to Root every MTK China Phone - Readback With SP-Flash - Root + CWM on INEW V8 [HD]
https://www.youtube.com/watch?v=s66e-kwvKUU

I could solve these problems:
- PDAnet ADB driver didn't recognize device. I used VCOM usb driver for win 10 (worked)
- Mtk_Droid_Tool_v2.5.3 didn't recognize phone, I used MTKDROIDTOOLS-FIX-1.1 from here https://forum.xda-developers.com/android/general/fix-impossible-to-start-adb-error-t3582571 (worked)

However I've the following problems:
1. Error messages
--- ERROR : --- TotalBytesPerChunk Not Found. Set default Page/Spare=2048/64 !!!
ATTENTION! File /system/recovery-from-boot.p which restore factory recovery in case of phone switching on in a normal mode Is Found!
(see attachment)

I tried different MTKdroidtool versions from different sources, there is plenty of internal mem and SD card mem

2.
Blocks map displays create scatter file greyed out: I'm unable to create a scatter file to store my current rom on HD

3.
engineering mode: user2root missing
*#*#3646633#*#*
shows engineering mode but Log and Debugging there is user2root button!
I tried to update Engineering Mode from playstore without success

4.
A desparate trial of RootGenius_en_3.1.3 caused me an unable to root error.



--> What can I do to store my current rom on a laptop to restore it if something happens?
--> How can I gain root access for my device?
--> Is there a faster alternative to add some RAM than with Roehsoft RAM-Expander?

Thank you very much for your help!

Good afternoon

It shows that you know a lot about the subject, I have the same tablet but wanting to put another ROM delete the entire system and now it does not turn on or anything, only the PC recognizes it in preloader. Do you have the Rom? Could you provide it to me to try to recover my tablet? I would thank you infinitely.

The only ROM I have found is this https: // w ww.needrom.com/download/jty-kt107/ But it needs a premium user and has not let me join.

I have searched the ROM everywhere and it is not there, I have tried to flash ROMs with similar characteristics and nothing works. You would help me a lot if you can do this, thank you and I await your response, happy day.

 

[amisprokillaz]

Please help me :c




Good afternoon

It shows that you know a lot about the subject, I have the same tablet but wanting to put another ROM delete the entire system and now it does not turn on or anything, only the PC recognizes it in preloader. Do you have the Rom? Could you provide it to me to try to recover my tablet? I would thank you infinitely.

The only ROM I have found is this https: // w ww.needrom.com/download/jty-kt107/ But it needs a premium user and has not let me join.

I have searched the ROM everywhere and it is not there, I have tried to flash ROMs with similar characteristics and nothing works. You would help me a lot if you can do this, thank you and I await your response, happy day.

i'm late to the game. but i'm too in need for new firmware for my JTY-k107. Android 4.4 does not play nicely these days. i'm not willing to purchase needrom premium membership for one file that has little probability to even work.