I'm new to Android. My chinese JTY Model N111 (KT107) only has 1GB of RAM which e.g. causes choppy playback of iOS mov files.
Besides this it has lots of china chunk that can't be disabled properly
Therefore I'd like to use Roehsoft RAM-Expander (SWAP) which requires root.
My specs:
http://specdevice.com/showspec.php?id=00de-2520-ffff-fffff1109570
Mediathek MT6592, 8x ARM cortex A7 @2Ghz,
Device: Manufact JTY, Model N111 (KT107)
Kernel 3.10.72+
I'm currently trying this without success:
How to Root every MTK China Phone - Readback With SP-Flash - Root + CWM on INEW V8 [HD]
https://www.youtube.com/watch?v=s66e-kwvKUU
I could solve these problems:
- PDAnet ADB driver didn't recognize device. I used VCOM usb driver for win 10 (worked)
- Mtk_Droid_Tool_v2.5.3 didn't recognize phone, I used MTKDROIDTOOLS-FIX-1.1 from here https://xdaforums.com/android/general/fix-impossible-to-start-adb-error-t3582571 (worked)
However I've the following problems:
1. Error messages
--- ERROR : --- TotalBytesPerChunk Not Found. Set default Page/Spare=2048/64 !!!
ATTENTION! File /system/recovery-from-boot.p which restore factory recovery in case of phone switching on in a normal mode Is Found!
(see attachment)
I tried different MTKdroidtool versions from different sources, there is plenty of internal mem and SD card mem
2.
Blocks map displays create scatter file greyed out: I'm unable to create a scatter file to store my current rom on HD
3.
engineering mode: user2root missing
*#*#3646633#*#*
shows engineering mode but Log and Debugging there is user2root button!
I tried to update Engineering Mode from playstore without success
4.
A desparate trial of RootGenius_en_3.1.3 caused me an unable to root error.
--> What can I do to store my current rom on a laptop to restore it if something happens?
--> How can I gain root access for my device?
--> Is there a faster alternative to add some RAM than with Roehsoft RAM-Expander?
Thank you very much for your help!
Besides this it has lots of china chunk that can't be disabled properly
Therefore I'd like to use Roehsoft RAM-Expander (SWAP) which requires root.
My specs:
http://specdevice.com/showspec.php?id=00de-2520-ffff-fffff1109570
Mediathek MT6592, 8x ARM cortex A7 @2Ghz,
Device: Manufact JTY, Model N111 (KT107)
Kernel 3.10.72+
I'm currently trying this without success:
How to Root every MTK China Phone - Readback With SP-Flash - Root + CWM on INEW V8 [HD]
https://www.youtube.com/watch?v=s66e-kwvKUU
I could solve these problems:
- PDAnet ADB driver didn't recognize device. I used VCOM usb driver for win 10 (worked)
- Mtk_Droid_Tool_v2.5.3 didn't recognize phone, I used MTKDROIDTOOLS-FIX-1.1 from here https://xdaforums.com/android/general/fix-impossible-to-start-adb-error-t3582571 (worked)
However I've the following problems:
1. Error messages
--- ERROR : --- TotalBytesPerChunk Not Found. Set default Page/Spare=2048/64 !!!
ATTENTION! File /system/recovery-from-boot.p which restore factory recovery in case of phone switching on in a normal mode Is Found!
(see attachment)
I tried different MTKdroidtool versions from different sources, there is plenty of internal mem and SD card mem
2.
Blocks map displays create scatter file greyed out: I'm unable to create a scatter file to store my current rom on HD
3.
engineering mode: user2root missing
*#*#3646633#*#*
shows engineering mode but Log and Debugging there is user2root button!
I tried to update Engineering Mode from playstore without success
4.
A desparate trial of RootGenius_en_3.1.3 caused me an unable to root error.
--> What can I do to store my current rom on a laptop to restore it if something happens?
--> How can I gain root access for my device?
--> Is there a faster alternative to add some RAM than with Roehsoft RAM-Expander?
Thank you very much for your help!
