• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!
  • Fill out your device list and let everyone know which phones you have!    Edit Your Device Inventory

MTCB/MTCC rk3188 (5.1.1) Firmware with an xposed set of MTC apps

Search This thread

kidclover

New member
Jun 14, 2021
1
0
Yeah look at all the posts above and on the previous page and see what version he asked for.
Greetings, Id love to get a 800x640 micro preinstalled version if possible. I sent a PM to you with Link for upload!
Hi.

Does anybody have a 800x640 microg version of this? I've searched the whole thread but no joy. I did come across johnydj's link to what he said was 800x640 microg but it was 1024 :(

Or.....

How hard is it to edit the update.img file and change the res to 800x640 myself? Anyone any knowledge or experience in this?
I have a copy if you can point me somewhere I can upload it to.
Greetings, Id love to get a 800x640 micro preinstalled version if possible. I sent a PM to you with Link for upload!
edit* Thank you!
 
Last edited:

hu016865

Senior Member
Dec 3, 2010
108
5
tehran
i have kld6 and in your website link i see kld23 with android 5.1.1.
is it ok or my head unit ?
and i found kdl6 but in android 7.1 .can i install kdl6 with 7.1 in my head unit ?
i had android 5.1.1 .my device have 1 gig ram and 16g storage.
 
Last edited:

hu016865

Senior Member
Dec 3, 2010
108
5
tehran
hi.
i tested 5.1.1 and i see this in monitor :

update rkimage complete.
installation rkimage aborted.
installation hctextcfg start
installation hctextcfg aborted
installation mcucfg start
installation mcucfg aborted
installation mcucfg start
-- not found .
installation mcucfg aborted
update fail.

after reboot head unit rebooted 3 times .but stay in mazda logo yet ..
in recovery i do wipe all but unsuccessful yet
 

hu016865

Senior Member
Dec 3, 2010
108
5
tehran
after many tries head unit is ok . but i see many errors google play stopped . galary stopped.google services stopped
and head unit reset 5-6 times and go back to mazda logo.
 

hu016865

Senior Member
Dec 3, 2010
108
5
tehran
i cant update .after set google account head unit reset and mazada logo again.
i cant install any app .
i see storage is not enough
head unit in in mazda logo again,
 

jcubed

Senior Member
Nov 7, 2008
57
13
Denver
Hi.

Does anybody have a 800x640 microg version of this? I've searched the whole thread but no joy. I did come across johnydj's link to what he said was 800x640 microg but it was 1024 :(

Or.....

How hard is it to edit the update.img file and change the res to 800x640 myself? Anyone any knowledge or experience in this?


I need the exact same thing if you still have this typos1. Here's my preferred filehost where you can click the upload files button.

 

typos1

Senior Member
Apr 3, 2007
9,424
1,700
UK
I need the exact same thing if you still have this typos1. Here's my preferred filehost where you can click the upload files button.

 

Top Liked Posts

  • There are no posts matching your filters.
  • 32
    Based on latest LOLLIPOP with MICRO GAPS and OPEN GAPS 1024 x 600 and 800 x 480 from @dsa8310.
    Sharing with you my custom modified rom with LP image.

    UPDATE 29.8.2017:
    MicroG version: 1024 x 600 and 800 x 480
    - added screen saver with speed, clock and apps shortcut ported from well known developer @Malaysk (null null still present)
    (if someone need: screen saver in the attachement - replace with root explorer: system - app - mtcscreenclock
    MTCScreenClock (round)
    - 1024 x 600 resolutions has different radio and bluetooth apk
    - included all xposed modules and fast google maps
    - remember to enable all xposed modules and copy folder contents to external gps card!!!
    Enjoy :)

    UPDATE: 3.9.2017 LINKS UP 2019
    microGaps version:
    Lite 1024x600 microG version.
    openGaps version:
    Lite 1024 x 600 openG version.
    Lite 800 x 480 openG version.

    ___________________________________________________________________________________
    - LITE version of system
    - added xposed status bar module for remove status bar items (copy mtc-status bar to external GPS Card)
    - new screen saver without null null text (if doesn't show install it manually from: system/app/mtcscreensaver)
    - removed all the bloatware callendar, calculator etc...
    - added a lot of tweaks to speed the units with 1gb ram
    - added new car launcher AG (trial) for me the best - full version 1€
    - new xposed mtc manager 2.5 module

    LITE VERSION OPTIMIZATIONS:
    - kernel tweaks (changed parameters of dalvik vm etc,...)
    - better ram management
    - faster scrolling
    - faster boot
    - better responsiveness
    - increased performance and app ram management
    - better video acceleration
    - disable sending android logging stuff
    - force gpu&cpu rendering
    System now uses less than 470 Mb of ram

    BEFORE YOU START:
    1. With disable service app find google play store and disable the first 5 services from top including DailyHygiene.
    2. Login to MicroG
    3. In microG settings enable google device registration
    4. Clear data on Google playstore or clear from recents
    5. Enjoy fast 5.1.11. playstore (if not showing paid apps just restart HU)

    MTCB MCU USERS
    - DSA's mtcxp xposed module has to be enabled before the status bar will show.

    PREINSTALLED APPS and MODULES:
    All these apps and xposed modules are preinstalled and you just have to activate xposed modules you need:
    - disable_service
    - google-maps-9.2 (you can update it just install as normal apk)
    - mtcservice-2.60
    - mtcsound-2.0.5 (remove from xposed if you don't have sound mod for better performance)
    - mtcxp-1.0
    - quickreboot
    - RootExplorer
    - Titanium_Backup
    - xposed-disablefullscreenkeyboard
    - xposed-mtc-bt-2.3
    - xposed-mtc-keys-5.2 (custom keys for harware buttons)
    - xposed-mtc-manager-2.5 (mode button mod and no closing apps when starting the car, etc.)
    - xposed-mtc-music-2.8
    - xposed-mtc-poweramp-1.4 (working media keys and stopping power amp when mtc app is started)
    - xposed-mtc-radio-1.11
    - xposed-VolumeBar (replaces original volume bar)
    - 7th floor sound mod preinstalled and working

    OTHER ADDITIONS: (included in download to copy on external SD (GPS card)
    There is also file to copy on SD card (GPS card) that has features for MTCManager:
    - hardware mode button can be configured (included in download) as well to switch between apps and auto play them (radio, poweramp, music, pcradio etc)
    - mtc screen clock
    - mtc status bar

    DISABLING THE SCREEN SAVER OR CHANGING TIME:
    Edit on external SD/ GPS-Card : Mtc.Manager/settings.ini
    # the inclusion of an alternative screen saver, when you specify false will work full-time mechanism:
    screenClock=false or true to activate
    # Time off the screen if you do not set out full-time settings will be used in sec:
    screenTimeout=300
    # The name of the screensaver program package
    screenPackage=com.microntek.screenclock
    # Name Activiti screensaver
    screenClass=MainActivity
    # If the name of the package and Activiti is not specified, it will use a standard screensaver


    MTC MANAGER CAPABILITIES:
    capabilities
    All configuration files must be on the external map in the mtc-manager directory.
    1. The module carries the functionality of xposed-mcu , which does not allow the radio to go to sleep during the scrolling of the starter.

    - when receiving a signal to turn off the module delays for 5 seconds, if at that moment the power reappears, nothing happens, in the absence of power, the radio recovers into sleep.

    Due to the features of the implementation of the inclusion in our MCU, the screen goes out for the time of voltage failure.
    This functionality can be disabled in settings.ini:
    Settings.ini
    Mcu_power = false
    2. The module has a white list of applications that does not allow the system to close necessary services and applications when going to sleep and when pressing the "Acceleration" button in the blind. Thus, the module allows to refuse from using mtc-wakeup-service .
    Filename with exceptions whitelist.ini
    The file name of the white list application packages must be listed.
    #
    example
    3. Accelerated start of user services. The services are started when the system kernel is loaded.
    The list of services should be on the external map in the mtc-manager directory, the file name start_services.ini
    each line should contain the service name in the format package name / full service name,
    #
    example
    4. An alternative screensaver with a list of exceptions, running in any (even a non-standard application). The standard screen saver mechanism is activated.
    It may not work on all firmware.
    Settings in the settings.ini file.
    Settings.ini
    # Inclusion of an alternative screensaver, if false, the standard mechanism will work:
    screenClock = true
    # screen off time, if not specified, the value from the
    default settings will be used: screenTimeout = 60
    # screen saver program name
    screenPackage = com.microntek.screenclock
    # screen saver activation name
    ScreenClass = MainActivity
    # if the package name and activations are not specified, then the standard screensaver will be used
    The exception list is located in the ss_exceptions.ini file - the package names must be listed, for example:
    Ss_exceptions.ini
    com.microntek.music
    ru.yandex.yandexmaps
    Also the screensaver will not start when talking on the phone, the rear view camera, navigation and turning off the radio.
    If instead of a beautiful clock MTCSreenClock.apk a screensaver with a standard digital clock on a black background is called, you need to make sure that the MTCScreenClock application is installed.
    If the application is installed, you can try setting screenPackage and screenClass parameters in settings.ini
    5. Also in the module there is a "backup" for correct sound adjustment in MTC-Volume and MTC-Service .
    #
    The adjustment of sound in firmware on Android 4.4.4
    6. Re-designation of OBD-device bluetooth.
    Device names must be listed in the settings.ini file in obd_device parameter, separated by commas, in the form in which they are visible in the standard hands-free application. You can specify not names, but parts of names, for example:
    Settings.ini
    Obd_device = OBD, DUAL-SPP
    7. Set the list of programs that are switched by the MODE button,
    In settings.ini, set
    Settings.ini
    ModeSwitch = true
    Programs are switched sequentially one after the other.
    For correct sound switching, the applications used must be managed (play / pause) programmatically via intents. If the player does not support the start and stop playback of external intents, then you have to manually switch the sound.
    When you click on the MODE button, the active application is searched for in the running list. Next, the application is sent a command (configurable in mode.ini) to close or pause the audio stream. After that, the default activation for the next application is launched and the application is sent a command to start playback (also configured in mode.ini)
    #
    Mode.ini
    8. Disable the launch of the last running program.
    Settings.ini
    Clear_last_app = true
    9. GPS time synchronization.
    Settings.ini
    Sync_gps_time = true
    10. Turn on w-fi at startup.
    Settings.ini
    Wifi.on = true


    Paypal:
    https://paypal.me/johnydj?locale.x=en_US
    4
    Can someone test this version (who had black screen before) if it works and has original logo and no black screen?
    http://www22.zippyshare.com/v/rctekwuH/file.html // 1024x600 VERSION FOR NOW!
    - lite version and original boot logo
    - latest microG that works
    - mode button works
    - latest tweaks

    If everything works I will replace boot logo with black one.
    3
    UPDATE: 1.3.2018
    microGaps version:
    1024 x 600 microG version.
    - added new tweaks for ram management
    - latest microG files to get playstore work again
    - added back other apps because the system is still fast because of microG
    - payed apps works and activate
    - app updating works
    - added black startup logo
    - replaced mtc manager with original one, because of better working system (less ''optimizing apps'' message)
    - other
    2
    UPDATE: 3.9.2017 - LITE VERSION - REMOVED BLOATWARE AND EXTRA OPTIMIZATION OF RAM MANAGEMENT, OPENING APPS ADN KERNEL OPTIMIZATION:
    For now: 1024 x 600 version.
    If everything is OK, will add 800 x 480

    - added xposed status bar module for remove status bar items (copy mtc-status bar to external GPS Card)
    - new screen saver without null null text
    - removed all the bloatware callendar, calculator etc...
    - added a lot of tweaks to speed the units with 1gb ram
    - added new car launcher AG (trial) for me the best - full version 1€
    - new xposed mtc manager 2.5 module

    Optimizations:
    - kernel tweaks (changed parameters of dalvik vm etc,...)
    - better ram management
    - faster scrolling
    - faster boot
    - better responsiveness
    - increased performance and app ram management
    - better video acceleration
    - disable sending android logging stuff
    - force gpu rendering
    System now uses less than 490 Mb of ram
    2
    MicroG 800x480 LP LITE with extra modifications.
    If everything works ok, will add in OP.