MTCB/MTCC rk3188 (5.1.1) Firmware

[~phoeny~]

This is by far the best firmware i have tried yet for my unit. Included Media Player is Trash though, Only Shows deepest folder, Ignores .nomedia I really enjoy listening to nav voice examples between the tracks :crying:

 

[Karanso]

How can we change/remove the icon, backarrow, screen, home etc in Statusline?

 

[rgviewer]

Thank you for this wonderful rom. It is very fast and am loving it. But I do have one problem I was wondering if anyone might be able to answer. I can no longer connect to my WiFi at home. I tried several times and it can't find the IP address. I have checked and rechecked my password. I even removed security on my router. Still will not connect. It saves the Network Name (SSID), but just times out.
Thanks for any help

---------- Post added at 10:11 PM ---------- Previous post was at 10:09 PM ----------

Thank you for this wonderful rom. It is very fast and am loving it. But I do have one problem I was wondering if anyone might be able to answer. I can no longer connect to my WiFi at home. I tried several times and it can't find the IP address. I have checked and rechecked my password. I even removed security on my router. Still will not connect. It saves the Network Name (SSID), but just times out.
Thanks for any help

I am using the Open GApps rom. Also my head unit is a Joying MTCB 1 Gig Ram. Originally 4.4 kitkat

 

[dsa8310]

This is by far the best firmware i have tried yet for my unit. Included Media Player is Trash though, Only Shows deepest folder, Ignores .nomedia I really enjoy listening to nav voice examples between the tracks :crying:

I use Poweramp: the playlist is configurable - you can opt out from system, nav folders. And I provided custom support for it related to fast music restart after power on...

 

[dsa8310]

Thank you for this wonderful rom. It is very fast and am loving it. But I do have one problem I was wondering if anyone might be able to answer. I can no longer connect to my WiFi at home. I tried several times and it can't find the IP address. I have checked and rechecked my password. I even removed security on my router. Still will not connect. It saves the Network Name (SSID), but just times out.
Thanks for any help.

I am using the Open GApps rom. Also my head unit is a Joying MTCB 1 Gig Ram. Originally 4.4 kitkat

Try to use a fixed IP address.
And, have you done a "wipe all" from recovery yet? Followed by HU reconfiguration, of course.

 

[rgviewer]

Try to use a fixed IP address.
And, have you done a "wipe all" from recovery yet? Followed by HU reconfiguration, of course.

I did do a wipe all when I installed, I did it again just in case. It still would not obtain IP address, but after I manually set IP address inside wifi settings on stereo it connected. Kinda weird that it would not connect by DHCP but I really don't care. Either way it works now. A Big Thumbs Up to you.

Thanks again :laugh:

 

[dsa8310]

Admittedly, it has happened to me, too. Frustrating, but I got all my home/local network on fixed IP... And it was a long time ago.
However, the HU can connect to (most) other public access points, via dhcpd.
It will go away, after a while...

 

[thachosenone]

Can someone try out Netflix on this rom? I had issues in the past with Netflix and 5.1 roms.

Sent from my SM-N950U using Tapatalk

 

[rgviewer]

Is there anyway to not auto start Poweramp. Sometimes it starts in the background. Example, I was listening to radio, shut off car. Came back and booted device, Radio started playing.. then a few seconds later Poweramp kicks in. Both radio and Poweramp play over each other. I have read Poweramp isn't supposed to auto play if something else is playing. Sometimes it works sometimes it doesn't. Also sometimes I don't want anything to play, as weird as that sounds sometimes I get out of all music while driving and just enjoy silence. But I know that next time I start car Poweramp auto kicks in, then I have to go in and shut it off. I love poweramp when I use it. But wasn't sure if there is a way to shut off auto start of poweramp.

I got to say. I am really loving the look of this firmware, and don't want to go back to stock, or another rom for that fact.

Thanks

 

[dsa8310]

Comment out (with # in front of lines), with a root editor, then reboot, the following code toward end of script /etc/install-recovery.sh:

###                        #always restart
###                        #second to last
###                        usbmnt
###                        while ! am startservice -a com.maxmpz.audioplayer.API_COMMAND --ei cmd 3; do sleep 1; done
###                        sleep 2

BTW, if script gets damaged (e.g. it becomes not executable), the fix is firmware installation anew, but without clear all, to preserve current configuration.

===
But aren't you in breach of OP rules?!

 

[rgviewer]

Comment out (with # in front of lines), with a root editor, then reboot, the following code toward end of script /etc/install-recovery.sh:

###                        #always restart
###                        #second to last
###                        usbmnt
###                        while ! am startservice -a com.maxmpz.audioplayer.API_COMMAND --ei cmd 3; do sleep 1; done
###                        sleep 2

BTW, if script gets damaged (e.g. it becomes not executable), the fix is firmware installation anew, but without clear all, to preserve current configuration.

===
But aren't you in breach of OP rules?!

Thank you for responding so quickly. I will give it a go.

 

[baybars sultan]

As promised, the dsa logo kernels (thanks to SergioPoverony's tools), for either Open GApps or MicroG (LP!) firmware versions:

dsakernelKLD1024x600LP5.1.1.rk3188.MTCB-C.December.rar

dsakernelKLD800x480LP5.1.1.rk3188.MTCB-C.December.rar

Black kernels seem not needed - the original logo is an LP one.

I am not sure that there is a Settings/Factory Settings/Logo valid combination that would show the brief Android logo followed by the car (boot animation) logo, but anyway, just for fun & fans!
I will check it out later, 'cause I'm under LP again!

BTW, installation is swift since the update.img file is very small in size -- do not clear or wipe anything.

===
It's "Logo Animation One" (the default) that combines Android/DSA logo with boot animation/car logo, under LP.
I did not explore other boot animations beyond car logo, though I'm sure they are possible.

Please, reupdate the file, zippyshare deleted file

 

[dsa8310]

Please, reupdate the file, zippyshare deleted file

That's not absolutely necessary because fortunately current firmware does include the dsa kernels...

 

[baybars sultan]

Ohh sorry @dsa8310 Thank you for your interest...

 

[fectivi]

Hi, just flash the micro g version, i have only one problem with the Bluetooth that not working, the parameters are empty, and when i filed them it's reset again after reboot, any idea how to solve this problem?

 

[dsa8310]

Hi, just flash the micro g version, i have only one problem with the Bluetooth that not working, the parameters are empty, and when i filed them it's reset again after reboot, any idea how to solve this problem?

Probably in the Settings/Factory Settings (password 126) menu, select the right BT device type?
Although your picture does not seem to represent my firmware...

 

[technobibba]

MTCC-KLD6 version

what is the newest version of MTCC-KLD6?

Sorry for my bad english

 

[pcmender2005]

what is the newest version of MTCC-KLD6?

Sorry for my bad english

Read the first page

 

[fectivi]

Probably in the Settings/Factory Settings (password 126) menu, select the right BT device type?
Although your picture does not seem to represent my firmware...

Thank you for your reply, I installed the firmware from the op, with your logo on startup.

I didn't change the bt settings from the factory settings.

I had before Malaysk 4.4 rom, and there was xposed module that was fixed the Bluetooth issues.

There is more pictures.

 

[carlosgo333]

66uuolmbvzzx aqweoiaqwxftouhyyggv 6uu