mtk6755 ERROR: NAND Flash was not detected

[split52]

hi, after upgrade new rom, my mtk6755 is dead, used flashtool and on memory test i get the message ERROR: NAND Flash was not detected, some help??
thanks

 

[split52]

Uploaded with ImageShack.us

 

[split52]

Uploaded with ImageShack.us

 

[reguero01]

problem in x810d

me too
thumbnails106.imagebam.com/23093/98d25a230925382.jpg

 

[conteabba]

Same problem..
Phone boot up, backlight is on, but the screen is blank.

 

[masterofdarker]

Finally solved the problem...

I've a some problem... but after google a few weeks, i've solved the problem...
Thanks to my phone seller for advice and mr. ramsuresh4 for excellent tutorials...

Here my way...

1. Download SP flash tool (I think you already have) and Smartphone multiport download tool = http://www.mediafire.com/?1ycvu9ywv7vjnhv.
2. Open and run as admin - SPMultiPortFlashDownloadProject.
3. Click file, open download agent name' and add 'MTK_AllInOne_DA.bin'.
4. Open factory database and select the .mdb file.
5. Click scatter file - and select the .txt scatter file.
6. Then the 'top three boxes (LCD and camera driver) . You click last - ???????? button and unlock it for changing driver parameters.
7. Remember the 1st box for back camera, 2nd box for front camera, 3rd box for display driver.
8. My recommended :
under sensor 1 selectv5647_raw
under sensor 2 select:hi704_yuv
under sensor 3 select:T050UWV014NS or if it doesnt work LM050AMYBO1E
(if doesnt work change again and again)
9. Select high speed and no battery (I think no need to do).
10. Simply close the Tool. then open, SP flash tool
11. Select scatter loading, and load the same 'scatter file' , which you previously opened in the 'multiport download tool'
12. SELECT 'UBOOT' ONLY AND NOT SELECT OTHER ALL PARAMETERS. THEN CLICK DOWNOAD.

Then reboot your phone and check... display is ok ?
If not ok, Then again open smartphone multiport download tool and change the display driver and do the same all things previously.
You have to do repeatly, until, you are getting display normal.
The same thing for camera's working also.

Credit to : ramsuresh4

Referral link :
http://forum.xda-developers.com/showthread.php?t=1942268&page=4
http://www.nxglabs.in/nxgblog/?p=324

Hope your phone working again... thank you...

 

[spideric]

I've a some problem... but after google a few weeks, i've solved the problem...
Thanks to my phone seller for advice and mr. ramsuresh4 for excellent tutorials...

Here my way...

1. Download SP flash tool (I think you already have) and Smartphone multiport download tool = http://www.mediafire.com/?1ycvu9ywv7vjnhv.
2. Open and run as admin - SPMultiPortFlashDownloadProject.
3. Click file, open download agent name' and add 'MTK_AllInOne_DA.bin'.
4. Open factory database and select the .mdb file.
5. Click scatter file - and select the .txt scatter file.
6. Then the 'top three boxes (LCD and camera driver) . You click last - ???????? button and unlock it for changing driver parameters.
7. Remember the 1st box for back camera, 2nd box for front camera, 3rd box for display driver.
8. My recommended :
under sensor 1 selectv5647_raw
under sensor 2 select:hi704_yuv
under sensor 3 select:T050UWV014NS or if it doesnt work LM050AMYBO1E
(if doesnt work change again and again)
9. Select high speed and no battery (I think no need to do).
10. Simply close the Tool. then open, SP flash tool
11. Select scatter loading, and load the same 'scatter file' , which you previously opened in the 'multiport download tool'
12. SELECT 'UBOOT' ONLY AND NOT SELECT OTHER ALL PARAMETERS. THEN CLICK DOWNOAD.

Then reboot your phone and check... display is ok ?
If not ok, Then again open smartphone multiport download tool and change the display driver and do the same all things previously.
You have to do repeatly, until, you are getting display normal.
The same thing for camera's working also.

Credit to : ramsuresh4

Referral link :
http://forum.xda-developers.com/showthread.php?t=1942268&page=4
http://www.nxglabs.in/nxgblog/?p=324

Hope your phone working again... thank you...

What scatterfile are you using?

 

[spideric]

I keep getting "Incorrect scatter file naming" trying to load my scatter file: MT6589_Android_scatter_emmc

 

[masterofdarker]

I keep getting "Incorrect scatter file naming" trying to load my scatter file: MT6589_Android_scatter_emmc

What scatterfile are you using?

The scatterfile you need is inside in your firmware... if you load a right firmware, you should be can load the scatterfile without problem... if you have problem again, just ask, i'll try the best to help you as far as I know... thanks... :good:

 

[spideric]

The scatterfile you need is inside in your firmware... if you load a right firmware, you should be can load the scatterfile without problem... if you have problem again, just ask, i'll try the best to help you as far as I know... thanks... :good:

I keep hitting unlock after I've entered the values & nothing happens. (As per posts above, I keep hitting unlock)

Attachment

 

[masterofdarker]

I keep hitting unlock after I've entered the values & nothing happens. (As per posts above, I keep hitting unlock)

Attachment

Sorry friend for late reply... i think you got the problem with MDT flashtool... try redownload software or use another version... make sure you already install the right driver for your android phone (for sp flashtool)...

 

[pkollar]

What scatterfile are you using?

I don't find UBOOT parameter!

---------- Post added at 07:38 AM ---------- Previous post was at 07:23 AM ----------

I've a some problem... but after google a few weeks, i've solved the problem...
Thanks to my phone seller for advice and mr. ramsuresh4 for excellent tutorials...

Here my way...

1. Download SP flash tool (I think you already have) and Smartphone multiport download tool = http://www.mediafire.com/?1ycvu9ywv7vjnhv.
2. Open and run as admin - SPMultiPortFlashDownloadProject.
3. Click file, open download agent name' and add 'MTK_AllInOne_DA.bin'.
4. Open factory database and select the .mdb file.
5. Click scatter file - and select the .txt scatter file.
6. Then the 'top three boxes (LCD and camera driver) . You click last - ???????? button and unlock it for changing driver parameters.
7. Remember the 1st box for back camera, 2nd box for front camera, 3rd box for display driver.
8. My recommended :
under sensor 1 selectv5647_raw
under sensor 2 select:hi704_yuv
under sensor 3 select:T050UWV014NS or if it doesnt work LM050AMYBO1E
(if doesnt work change again and again)
9. Select high speed and no battery (I think no need to do).
10. Simply close the Tool. then open, SP flash tool
11. Select scatter loading, and load the same 'scatter file' , which you previously opened in the 'multiport download tool'
12. SELECT 'UBOOT' ONLY AND NOT SELECT OTHER ALL PARAMETERS. THEN CLICK DOWNOAD.

Then reboot your phone and check... display is ok ?
If not ok, Then again open smartphone multiport download tool and change the display driver and do the same all things previously.
You have to do repeatly, until, you are getting display normal.
The same thing for camera's working also.

Credit to : ramsuresh4

Referral link :
http://forum.xda-developers.com/showthread.php?t=1942268&page=4
http://www.nxglabs.in/nxgblog/?p=324

Hope your phone working again... thank you...

12. SELECT 'UBOOT' ONLY AND NOT SELECT OTHER ALL PARAMETERS. THEN CLICK DOWNOAD.
I can't find 'UBOOT' parameter, (where are the OTHER parameters) and DOWNLOAD button to. I use Smartphone Multiport Download ver 3.1304.00.00.
Please help me!

 

[inGen.AD]

Look at the title bar,if "runtime trace mode" is written then press CTRL+ALT+T. Load the scatter file and select every thing and click download. When it shoes searching connect the phone with battery removed. Hope it works

 

[pkollar]

I've a some problem... but after google a few weeks, i've solved the problem...
Thanks to my phone seller for advice and mr. ramsuresh4 for excellent tutorials...

Here my way...

1. Download SP flash tool (I think you already have) and Smartphone multiport download tool = http://www.mediafire.com/?1ycvu9ywv7vjnhv.
2. Open and run as admin - SPMultiPortFlashDownloadProject.
3. Click file, open download agent name' and add 'MTK_AllInOne_DA.bin'.
4. Open factory database and select the .mdb file.
5. Click scatter file - and select the .txt scatter file.
6. Then the 'top three boxes (LCD and camera driver) . You click last - ???????? button and unlock it for changing driver parameters.
7. Remember the 1st box for back camera, 2nd box for front camera, 3rd box for display driver.
8. My recommended :
under sensor 1 selectv5647_raw
under sensor 2 select:hi704_yuv
under sensor 3 select:T050UWV014NS or if it doesnt work LM050AMYBO1E
(if doesnt work change again and again)
9. Select high speed and no battery (I think no need to do).
10. Simply close the Tool. then open, SP flash tool
11. Select scatter loading, and load the same 'scatter file' , which you previously opened in the 'multiport download tool'
12. SELECT 'UBOOT' ONLY AND NOT SELECT OTHER ALL PARAMETERS. THEN CLICK DOWNOAD.

Then reboot your phone and check... display is ok ?
If not ok, Then again open smartphone multiport download tool and change the display driver and do the same all things previously.
You have to do repeatly, until, you are getting display normal.
The same thing for camera's working also.

Credit to : ramsuresh4

Referral link :
http://forum.xda-developers.com/showthread.php?t=1942268&page=4
http://www.nxglabs.in/nxgblog/?p=324

Hope your phone working again... thank you...

My phone is s9500. I try all display driver, but the screen is white when I turn on the phone, and when I testing the memory, the result is ERROR: NAND Flash was not detected!
What can I do wrong?

 

[masterofdarker]

My phone is s9500. I try all display driver, but the screen is white when I turn on the phone, and when I testing the memory, the result is ERROR: NAND Flash was not detected!
What can I do wrong?

It seem your phone is mtk6589... yes, mtk6589 have a bit problem... as long as your phone can't find the correct display drivers, the result always is : ERROR: NAND Flash was not detected! Try another version both SP flash tool and SPMultiPortFlashDownload...

try this :
http://www.mediafire.com/download/06i9q9137o85vbf/SP_Flash_Tool_exe_v3.1312.0.139.zip
http://howfile.com/file/lkk5431/68c2d593/

Good luck friend...

 

[pkollar]

It seem your phone is mtk6589... yes, mtk6589 have a bit problem... as long as your phone can't find the correct display drivers, the result always is : ERROR: NAND Flash was not detected! Try another version both SP flash tool and SPMultiPortFlashDownload...


I think that is the problem, I found only Star N9500 rom but the N9500 screen resolution is 1280 x 720, and my Star S9500 only 854*480 .
I try star-n9500-rom-stock-20130514 ROM to store to my phone , but the Nand flash Error do not persist.
Can you help me where I can find Star S9500 rom, or how can I use the Start N9500 Rom, to my phone (if it possible)?


Thx Your help!

 

[ian619420]

my phone is haipai i9389 i have white screen, i try spmulti i downloaded both 2 roms root and the non root rom, but the scatterfile says incorrect on spmultiportflash. help please

 

[PackMan123]

@split52 I am having the same NAND Flash not detected problem. Did you solve the problem?

 

[elfanto]

Hi, i was trying to change drivers with this tool, but allways shows me the "Incorrect scatter file naming". Any ideas to solve this?

 

[ronald027]

does anyone fix their ERROR: NAND Flash was not detected! ??can anyone help about this?