mtk6755 ERROR: NAND Flash was not detected

[jamshy]

Hi

I am stuck with Huawei Y511-U30 with black screen.
Phone detected by PC.
I tried using the above method.
Unable to select the scatter file.
Error: Incorrect scatter file naming" trying to load my scatter file.
I got this scatter file (MT6572_Android_scatter file ) from the above link for the firmware.

Any help will be appreciated.

 

[damboohala]

keeps having error scatter file name error

---------- Post added at 12:58 AM ---------- Previous post was at 12:52 AM ----------

cant load scatter file

 

[jamshy]

Can I get the correct file

 

[Sharashchandra]

Can anyone help me to get back my device. i have htc desire 616 dual dead after flash.when i run the memory check its showing NAND flash was not detected ,then i used spmdt tool but when i click scan its showing DA with full red bar with 100% nothing more than that.
thanks in advance

 

[cafe001]

when i am selecting scatter file error is accuring "incorrect scatter file nameing " pls help

 

[akash172946]

Are you able to Boot It Up

I am getting this error,
"Incorrect scatter file naming!"
while trying to fix my Android One ( Micromax AQ4501) MT6582. Its been bricked, no boot animation, no boot logo, no recovery, nothing. I've tried flashing the STOCK LP ROM several times but nothing happened. So this might be my last option.

Same Happened with my device (A1) , If you did the Job then pls tell me Any tHING THAT HELPED YOU BRO

 

[ppuri3]

Samsung Galaxy S8+ Clone

Hi, I have the following phone: I was receiving some errors but flashed with "MT6580__samsung__SM-G950__hero2qltechn__7.0__ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P55"
Now the phone boots but I do not get a display. Just the back light on the LED. I tried following your instructions but get the error "Incorrect scatter file naming!" . Do you know of the appropriate scatter file for my phone details listed below?

Samsung Galaxy S8+ Clone
BB CHip : MT6580
MS Board. : hero2qltechn
Build tzime :
2018 01 23 17:51:37 C
Kernel Ver. :
3.10.0-2828982 ([email protected]) (gcc version 4.8 (GCC) #1 SMP PREEMPT Tue Jan 23 18:00:35 CST 2018
Android Ver. : 7.0
SW Ver. :
ALPS.L1.MP6.V2.19_HTC6580.WEG.A.L_P55
Custom Build Verno. : unknown
Modem Ver. :
MOLLY.WR8.W1449.MD.WG.MP.V23.P8, 2016/07/25 26:07
Bar code : 10

 

[2012z]

Hi, I have the following phone: I was receiving some errors but flashed with "MT6580__samsung__SM-G950__hero2qltechn__7.0__ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P55"
Now the phone boots but I do not get a display. Just the back light on the LED. I tried following your instructions but get the error "Incorrect scatter file naming!" . Do you know of the appropriate scatter file for my phone details listed below?

Samsung Galaxy S8+ Clone
BB CHip : MT6580
MS Board. : hero2qltechn
Build tzime :
2018 01 23 17:51:37 C
Kernel Ver. :
3.10.0-2828982 ([email protected]) (gcc version 4.8 (GCC) #1 SMP PREEMPT Tue Jan 23 18:00:35 CST 2018
Android Ver. : 7.0
SW Ver. :
ALPS.L1.MP6.V2.19_HTC6580.WEG.A.L_P55
Custom Build Verno. : unknown
Modem Ver. :
MOLLY.WR8.W1449.MD.WG.MP.V23.P8, 2016/07/25 26:07
Bar code : 10

Try using ODIN... download a firmware that's consistent with your model.

 

[samd1234]

I've a some problem... but after google a few weeks, i've solved the problem...
Thanks to my phone seller for advice and mr. ramsuresh4 for excellent tutorials...

Here my way...

1. Download SP flash tool (I think you already have) and Smartphone multiport download tool = http://www.mediafire.com/?1ycvu9ywv7vjnhv.
2. Open and run as admin - SPMultiPortFlashDownloadProject.
3. Click file, open download agent name' and add 'MTK_AllInOne_DA.bin'.
4. Open factory database and select the .mdb file.
5. Click scatter file - and select the .txt scatter file.
6. Then the 'top three boxes (LCD and camera driver) . You click last - ???????? button and unlock it for changing driver parameters.
7. Remember the 1st box for back camera, 2nd box for front camera, 3rd box for display driver.
8. My recommended :
under sensor 1 selectv5647_raw
under sensor 2 select:hi704_yuv
under sensor 3 select:T050UWV014NS or if it doesnt work LM050AMYBO1E
(if doesnt work change again and again)
9. Select high speed and no battery (I think no need to do).
10. Simply close the Tool. then open, SP flash tool
11. Select scatter loading, and load the same 'scatter file' , which you previously opened in the 'multiport download tool'
12. SELECT 'UBOOT' ONLY AND NOT SELECT OTHER ALL PARAMETERS. THEN CLICK DOWNOAD.

Then reboot your phone and check... display is ok ?
If not ok, Then again open smartphone multiport download tool and change the display driver and do the same all things previously.
You have to do repeatly, until, you are getting display normal.
The same thing for camera's working also.

Credit to : ramsuresh4

Referral link :
http://forum.xda-developers.com/showthread.php?t=1942268&page=4
http://www.nxglabs.in/nxgblog/?p=324

Hope your phone working again... thank you...

scatter file is not found in zip. where is that file ?

 

[hjhjhjhkhjhksbowbdksnx]

Did you solve your scatter file problem? If you did, how? I have the same device and same prob.