mtk6755 ERROR: NAND Flash was not detected

Search This thread

wendafon

Member
Dec 29, 2012
22
12
Lovosice
www.facebook.com
I've a some problem... but after google a few weeks, i've solved the problem...
Thanks to my phone seller for advice and mr. ramsuresh4 for excellent tutorials...

Here my way...

1. Download SP flash tool (I think you already have) and Smartphone multiport download tool = http://www.mediafire.com/?1ycvu9ywv7vjnhv.
2. Open and run as admin - SPMultiPortFlashDownloadProject.
3. Click file, open download agent name' and add 'MTK_AllInOne_DA.bin'.
4. Open factory database and select the .mdb file.
5. Click scatter file - and select the .txt scatter file.
6. Then the 'top three boxes (LCD and camera driver) . You click last - ???????? button and unlock it for changing driver parameters.
7. Remember the 1st box for back camera, 2nd box for front camera, 3rd box for display driver.
8. My recommended :
under sensor 1 select:eek:v5647_raw
under sensor 2 select:hi704_yuv
under sensor 3 select:T050UWV014NS or if it doesnt work LM050AMYBO1E
(if doesnt work change again and again)
9. Select high speed and no battery (I think no need to do).
10. Simply close the Tool. then open, SP flash tool
11. Select scatter loading, and load the same 'scatter file' , which you previously opened in the 'multiport download tool'
12. SELECT 'UBOOT' ONLY AND NOT SELECT OTHER ALL PARAMETERS. THEN CLICK DOWNOAD.

Then reboot your phone and check... display is ok ?
If not ok, Then again open smartphone multiport download tool and change the display driver and do the same all things previously.
You have to do repeatly, until, you are getting display normal.
The same thing for camera's working also.

Credit to : ramsuresh4

Referral link :
http://xdaforums.com/showthread.php?t=1942268&page=4
http://www.nxglabs.in/nxgblog/?p=324

Hope your phone working again... thank you... ;)

SCATTER txt not add
 

abhinay32

New member
Apr 30, 2016
1
0
The scatterfile you need is inside in your firmware... if you load a right firmware, you should be can load the scatterfile without problem... if you have problem again, just ask, i'll try the best to help you as far as I know... thanks... :good:

scatter file is incorrect in naming for MT6582_Android_scatter what should I do now tell me fast as soon as possible thanks
 

zputnyq

Senior Member
Apr 19, 2013
619
278
I have the same problem but my device is acer z205 mtk6572 & I wanna solve it with the tutorial provided here. However I am facing difficulty on driver parameters. Would you show me the way how to get driver parameters?
 

jamshy

Member
Jun 9, 2010
12
0
The scatterfile you need is inside in your firmware... if you load a right firmware, you should be can load the scatterfile without problem... if you have problem again, just ask, i'll try the best to help you as far as I know... thanks... :good:
I am too getting the same error Incorrect scatter file naming?
Please help
Y511-U30 not booting. No logo.
 

lamargentech

New member
Sep 24, 2016
1
0
i have the same problem with my iview 600

The scatterfile you need is inside in your firmware... if you load a right firmware, you should be can load the scatterfile without problem... if you have problem again, just ask, i'll try the best to help you as far as I know... thanks... :good:
i have the same problem with my iview 600..when i tried to load the file its saying
incorrect scatter file naming
 

marymagdline

New member
Aug 15, 2016
3
0
Letter

I've a some problem... but after google a few weeks, i've solved the problem...
Thanks to my phone seller for advice and mr. ramsuresh4 for excellent tutorials...

Here my way...

1. Download SP flash tool (I think you already have) and Smartphone multiport download tool = http://www.mediafire.com/?1ycvu9ywv7vjnhv.
2. Open and run as admin - SPMultiPortFlashDownloadProject.
3. Click file, open download agent name' and add 'MTK_AllInOne_DA.bin'.
4. Open factory database and select the .mdb file.
5. Click scatter file - and select the .txt scatter file.
6. Then the 'top three boxes (LCD and camera driver) . You click last - ???????? button and unlock it for changing driver parameters.
7. Remember the 1st box for back camera, 2nd box for front camera, 3rd box for display driver.
8. My recommended :
under sensor 1 select:eek:v5647_raw
under sensor 2 select:hi704_yuv
under sensor 3 select:T050UWV014NS or if it doesnt work LM050AMYBO1E
(if doesnt work change again and again)
9. Select high speed and no battery (I think no need to do).
10. Simply close the Tool. then open, SP flash tool
11. Select scatter loading, and load the same 'scatter file' , which you previously opened in the 'multiport download tool'
12. SELECT 'UBOOT' ONLY AND NOT SELECT OTHER ALL PARAMETERS. THEN CLICK DOWNOAD.

Then reboot your phone and check... display is ok ?

If not ok, Then again open smartphone multiport download tool and change the display driver and do the same all things previously.
You have to do repeatly, until, you are getting display normal.
The same thing for camera's working also.

Credit to : ramsuresh4

Referral link :
http://xdaforums.com/showthread.php?t=1942268&page=4
http://www.nxglabs.in/nxgblog/?p=324

Hope your phone working again... thank you... ;)

My Htc desire 616 dual sim hard bricked and tried so manay roms through SP flash tool and every thing failed and shows no sapce error and i tried this SP MDT tool but i can not add scatter file How can i add this one please help Click scatter file - and select the .txt scatter file. - there is no scatter file in SP MDT folder...... Please help

---------- Post added at 03:51 PM ---------- Previous post was at 03:42 PM ----------

hi, after upgrade new rom, my mtk6755 is dead, used flashtool and on memory test i get the message ERROR: NAND Flash was not detected, some help??
thanks
The same problem happend for HTC desire 616 dual sim, can not flash with sp flash tool, no space error 5069. Tried all most all rom got from some sites. Every thing failed. Memory test result ...... Internal RAM:


External RAM:

Type = DRAM

Size = 0x40000000 (1024MB/8192Mb)

NAND Flash:

ERROR: NAND Flash was not detected!

EMMC:

EMMC_PART_BOOT1 Size = 0x0000000000200000(2MB)
EMMC_PART_BOOT2 Size = 0x0000000000200000(2MB)
EMMC_PART_RPMB Size = 0x0000000000200000(2MB)
EMMC_PART_GP1 Size = 0x0000000000000000(0MB)
EMMC_PART_GP2 Size = 0x0000000000000000(0MB)
EMMC_PART_GP3 Size = 0x0000000000000000(0MB)
EMMC_PART_GP4 Size = 0x0000000000000000(0MB)
EMMC_PART_USER Size = 0x00000000e7000000(3696MB)

UFS:

ERROR: UFS was not detected!

============ RAM Test ============

Data Bus Test:

[D0]
[D1]
[D2]
[D3]
[D4]
[D5]
[D6]
[D7]
[D8]
[D9]
[D10]
[D11]
[D12]
[D13]
[D14]
[D15]
[D16]
[D17]
[D18]
[D19]
[D20]
[D21]
[D22]
[D23]
[D24]
[D25]
[D26]
[D27]
[D28]
[D29]
[D30]
[D31]
OK!!

Address Bus Test:

[A1]
[A2]
[A3]
[A4]
[A5]
[A6]
[A7]
[A8]
[A9]
[A10]
[A11]
[A12]
[A13]
[A14]
[A15]
[A16]
[A17]
[A18]
[A19]
[A20]
[A21]
[A22]
[A23]
[A24]
[A25]
[A26]
[A27]
[A28]
[A29]
OK!!

RAM Pattern Test :
Writing ...
0x44332211,
0xA5A5A5A5,
0xA5A5A500,
0xA500A500,
0xA5000000,
0x00000000,
0xFFFF0000,
0xFFFFFFFF,
OK!!

Increment/Decrement Test:
Writing...
OK!!
Please help.....
 

do2deepak

Member
Mar 6, 2014
11
1
Nagpuur
Scatter File Error!

I am getting this error,
"Incorrect scatter file naming!"
while trying to fix my Android One ( Micromax AQ4501) MT6582. Its been bricked, no boot animation, no boot logo, no recovery, nothing. I've tried flashing the STOCK LP ROM several times but nothing happened. So this might be my last option.
 

Milor123

Senior Member
Jul 10, 2016
115
21
What file contain the NAND in a mtk devices? I have a mt6582 with ERROR: NAND Flash was not detected!, but is not dead, only bootloop...
 

saroj rex

New member
Jun 8, 2017
3
0
Plz help me....i tried to flash a ubislate 7c+x with sp tool and drivers were successfully intsalled first i used download only then it showed( pmt change) then i formated it from sp tool format option..then my tab doesn't turn on and then it shows enable dram..so i downloaded another firmware then again i flashed with sp tool this time it successfully flashed but my tab doesnt power on..i tried to flash without battery also but it doesn't worked..then i take a memory test it showed nand not detected.. and its doesnt power on....help me
 

zelendel

Senior Member
Aug 11, 2008
23,360
20,607
OnePlus 6T
OnePlus 9
Plz help me....i tried to flash a ubislate 7c+x with sp tool and drivers were successfully intsalled first i used download only then it showed( pmt change) then i formated it from sp tool format option..then my tab doesn't turn on and then it shows enable dram..so i downloaded another firmware then again i flashed with sp tool this time it successfully flashed but my tab doesnt power on..i tried to flash without battery also but it doesn't worked..then i take a memory test it showed nand not detected.. and its doesnt power on....help me
Buy a new device or send it to the oem. You will have to jtag it as you messed up the nanda partition and that will completely brick a device.
 

sudrufandtuf

New member
Jul 5, 2017
1
0
I have Micromax A120 which is mt6582.

I've a some problem... but after google a few weeks, i've solved the problem...
Thanks to my phone seller for advice and mr. ramsuresh4 for excellent tutorials...

Here my way...

1. Download SP flash tool (I think you already have) and Smartphone multiport download tool = http://www.mediafire.com/?1ycvu9ywv7vjnhv.
2. Open and run as admin - SPMultiPortFlashDownloadProject.
3. Click file, open download agent name' and add 'MTK_AllInOne_DA.bin'.
4. Open factory database and select the .mdb file.
5. Click scatter file - and select the .txt scatter file.
6. Then the 'top three boxes (LCD and camera driver) . You click last - ???????? button and unlock it for changing driver parameters.
7. Remember the 1st box for back camera, 2nd box for front camera, 3rd box for display driver.
8. My recommended :
under sensor 1 select:eek:v5647_raw
under sensor 2 select:hi704_yuv
under sensor 3 select:T050UWV014NS or if it doesnt work LM050AMYBO1E
(if doesnt work change again and again)
9. Select high speed and no battery (I think no need to do).
10. Simply close the Tool. then open, SP flash tool
11. Select scatter loading, and load the same 'scatter file' , which you previously opened in the 'multiport download tool'
12. SELECT 'UBOOT' ONLY AND NOT SELECT OTHER ALL PARAMETERS. THEN CLICK DOWNOAD.

Then reboot your phone and check... display is ok ?
If not ok, Then again open smartphone multiport download tool and change the display driver and do the same all things previously.
You have to do repeatly, until, you are getting display normal.
The same thing for camera's working also.

Credit to : ramsuresh4

Referral link :
http://xdaforums.com/showthread.php?t=1942268&page=4
http://www.nxglabs.in/nxgblog/?p=324

Hope your phone working again... thank you... ;)

I have used format+download in sp flash tool. after that my phone is booting but the screen is blank its not showing anything on the screen. I have done the memory test also after flashing with format+download it shows nand flash was not detected.... so how can I solve this problem. I have also tried SPMultiPortFlashDownloadProject but it shows incorrect scatter file naming. how to recover my phone.??
 

Top Liked Posts

  • There are no posts matching your filters.
  • 6
    Finally solved the problem...

    I've a some problem... but after google a few weeks, i've solved the problem...
    Thanks to my phone seller for advice and mr. ramsuresh4 for excellent tutorials...

    Here my way...

    1. Download SP flash tool (I think you already have) and Smartphone multiport download tool = http://www.mediafire.com/?1ycvu9ywv7vjnhv.
    2. Open and run as admin - SPMultiPortFlashDownloadProject.
    3. Click file, open download agent name' and add 'MTK_AllInOne_DA.bin'.
    4. Open factory database and select the .mdb file.
    5. Click scatter file - and select the .txt scatter file.
    6. Then the 'top three boxes (LCD and camera driver) . You click last - ???????? button and unlock it for changing driver parameters.
    7. Remember the 1st box for back camera, 2nd box for front camera, 3rd box for display driver.
    8. My recommended :
    under sensor 1 select:eek:v5647_raw
    under sensor 2 select:hi704_yuv
    under sensor 3 select:T050UWV014NS or if it doesnt work LM050AMYBO1E
    (if doesnt work change again and again)
    9. Select high speed and no battery (I think no need to do).
    10. Simply close the Tool. then open, SP flash tool
    11. Select scatter loading, and load the same 'scatter file' , which you previously opened in the 'multiport download tool'
    12. SELECT 'UBOOT' ONLY AND NOT SELECT OTHER ALL PARAMETERS. THEN CLICK DOWNOAD.

    Then reboot your phone and check... display is ok ?
    If not ok, Then again open smartphone multiport download tool and change the display driver and do the same all things previously.
    You have to do repeatly, until, you are getting display normal.
    The same thing for camera's working also.

    Credit to : ramsuresh4

    Referral link :
    http://xdaforums.com/showthread.php?t=1942268&page=4
    http://www.nxglabs.in/nxgblog/?p=324

    Hope your phone working again... thank you... ;)
    3
    My phone is s9500. I try all display driver, but the screen is white when I turn on the phone, and when I testing the memory, the result is ERROR: NAND Flash was not detected!
    What can I do wrong?

    It seem your phone is mtk6589... yes, mtk6589 have a bit problem... as long as your phone can't find the correct display drivers, the result always is : ERROR: NAND Flash was not detected! Try another version both SP flash tool and SPMultiPortFlashDownload...

    try this :
    http://www.mediafire.com/download/06i9q9137o85vbf/SP_Flash_Tool_exe_v3.1312.0.139.zip
    http://howfile.com/file/lkk5431/68c2d593/

    Good luck friend...
    2
    Same problem..
    Phone boot up, backlight is on, but the screen is blank.
    1
    hi, after upgrade new rom, my mtk6755 is dead, used flashtool and on memory test i get the message ERROR: NAND Flash was not detected, some help??
    thanks
    1
    I've a some problem... but after google a few weeks, i've solved the problem...
    Thanks to my phone seller for advice and mr. ramsuresh4 for excellent tutorials...

    Here my way...

    1. Download SP flash tool (I think you already have) and Smartphone multiport download tool = http://www.mediafire.com/?1ycvu9ywv7vjnhv.
    2. Open and run as admin - SPMultiPortFlashDownloadProject.
    3. Click file, open download agent name' and add 'MTK_AllInOne_DA.bin'.
    4. Open factory database and select the .mdb file.
    5. Click scatter file - and select the .txt scatter file.
    6. Then the 'top three boxes (LCD and camera driver) . You click last - ???????? button and unlock it for changing driver parameters.
    7. Remember the 1st box for back camera, 2nd box for front camera, 3rd box for display driver.
    8. My recommended :
    under sensor 1 select:eek:v5647_raw
    under sensor 2 select:hi704_yuv
    under sensor 3 select:T050UWV014NS or if it doesnt work LM050AMYBO1E
    (if doesnt work change again and again)
    9. Select high speed and no battery (I think no need to do).
    10. Simply close the Tool. then open, SP flash tool
    11. Select scatter loading, and load the same 'scatter file' , which you previously opened in the 'multiport download tool'
    12. SELECT 'UBOOT' ONLY AND NOT SELECT OTHER ALL PARAMETERS. THEN CLICK DOWNOAD.

    Then reboot your phone and check... display is ok ?
    If not ok, Then again open smartphone multiport download tool and change the display driver and do the same all things previously.
    You have to do repeatly, until, you are getting display normal.
    The same thing for camera's working also.

    Credit to : ramsuresh4

    Referral link :
    http://xdaforums.com/showthread.php?t=1942268&page=4
    http://www.nxglabs.in/nxgblog/?p=324

    Hope your phone working again... thank you... ;)


    What scatterfile are you using?