Could you please send me a video or a full guide with every single step to do? because I'm always ending up with the same issue and it's driving me crazy, i don't know what to do
My experience - PIXEL EXPERIENCE PLUS (A11) - GSI-Unofficial
- Thread starter -Alf-
- Start date
Since I updated to Android 12 i have problems with bluetooth. Here's the infos :
-I need to retry many time before succeeding to pair a device.
-I need to re-pair the device every time i want to connect it.
-It works normally as soon as it's connected.
(things like syncing with windows with the app "your phone" works)
(And also i'm considering to change to dotOS and i would know if it's better in terms of battery and performance than pe+)
-I need to retry many time before succeeding to pair a device.
-I need to re-pair the device every time i want to connect it.
-It works normally as soon as it's connected.
(things like syncing with windows with the app "your phone" works)
(And also i'm considering to change to dotOS and i would know if it's better in terms of battery and performance than pe+)
Last edited:
Tried but it's no working. Is there a way to flash TWRP over erecovery without a micro SD card?
maybe if you try to read whole section you would find the answer
it was just irony, sorry
I am also facing the same problem on PE+ [12.1].
As for dotOS, only 5.2 version is available, and dotOS 5.2 is not better than PE + [11], imo...
https://forum.xda-developers.com/t/data-decryption-on-emui-9-1.4319329/
P.S.: this is an older post; you can use the variant with TWRP also for stock EMUI
Does anyone have any more ideas on how to fix the bluetooth issues? The Treble Misc setting for Huawei bluetooth did nothing.
I tried finding similar issues on other forums but couldn't find any. The stock ROM also seems to have bluetooth issues that are related to battery settings, but the settings don't exist on PE+ (or AOSP for that matter).
Can't seem to connect to some devices at all, and e.g. speakers sound terrible with weird pauses every 5 sec or so...
If this doesn't get fixed I find no alternative than to switch to Android 11 (LOS 18 worked well right?) which is too bad, this ROM has otherwise been absolutely amazing.
I tried finding similar issues on other forums but couldn't find any. The stock ROM also seems to have bluetooth issues that are related to battery settings, but the settings don't exist on PE+ (or AOSP for that matter).
Can't seem to connect to some devices at all, and e.g. speakers sound terrible with weird pauses every 5 sec or so...
If this doesn't get fixed I find no alternative than to switch to Android 11 (LOS 18 worked well right?) which is too bad, this ROM has otherwise been absolutely amazing.
and if you try to try with CAOS to see how it works for you? It is not a solution but maybe that does not have the error that you get
Dolby Atmos for PE+ [12.1] (maybe it works also on PE+ [11P].
Required: Magisk root, root explorer.
1. In system/app-private uninstall MusicFX apk. Reboot.
2. Download Dolby Magisk module
3. In Magisk manager install D.A. module
4. Reboot.
Required: Magisk root, root explorer.
1. In system/app-private uninstall MusicFX apk. Reboot.
2. Download Dolby Magisk module
3. In Magisk manager install D.A. module
4. Reboot.
Last edited:
Hello it makes several months i didn t take a lokk here. It seems you reached to boot A12??
Last time i saw that forum it wasn t booting.
I've tried anything but with no result. In order to decrypt data I need to root my phone but to be able to root I need to flash twrp over erecovery ect... but i can't do any of those thing because I need to have data decrypted and so it starts all over again
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
13Stable enough to be used as your daily driver.
This rom is not developed nor maintained by me!
Credits: @ponces
Requirements: full stock EMUI 9.1, with stock recovery_ramdisk
Download arm64-ab-11.0-xxxxx
or arm64-ab-vndklite-11.0-xxxxx
Download: Link
Extra tip: try Lawnchair launcher
Install like any other GSI Rom including the Nfc patch.
IMPORTANT! Before booting up the ROM, you will need to perform a factory reset in stock recovery!
Quick and easy way to install GSI & NFC :
1. Extract the ROM .img file from the compressed file.
2. Flash extracted ... .img in fastboot , use command
fastboot flash system (file_name).img
3. In fastboot flash TWRP over eRecovery (!) - guide:
https://forum.xda-developers.com/t/rom-official-anne-9-lineageos-16-0.4151163/post-83603363
4. Run command fastboot reboot , enter TWRP (press and hold Volume Up)
5. In TWRP unmount all except SD Card , Vendor and System (unmount and mount again if needed) and flash NFC patch
6. Go back to the TWRP's main menu, select Reboot > Recovery.
7. Now you can perform factory reset in stock Recovery.
Note: the TWRP will remain instead of eRecovery.
MAGISK ROOT :
(Note: If you don't plan to use TWRP, simply install patched Recovery_ramdisk in fastboot mode. Run command
fastboot flash recovery_ramdisk magisk_patched-23.img ).
Install TWRP-9.1
https://mega.nz/#!tkcTlATI!A8UJGPBGtxJbLcUOJoxCGJj5PFZXzCnjbb3OkwqKTP8
over eRecovery (it's necessary on EMUI 9.1 - Guide
( Note: for those who want keep the erecovery as a fail-safe:
https://forum.xda-developers.com/t/...-erecovery-with-twrp-installed-on-it.4357127/ )
1. In TWRP flash Mount-fix .zip file
2. Reboot into TWRP
3. Select 'Install Image' and flash
patched recovery_ramdisk
https://mega.nz/file/lp1kHLxJ#htCMaPjSsg_dy0w_jNOft-t_DZRAPwhOvwy_Wr2cjX8
over recovery_ramdisk.
4. Go back , select Reboot > Recovery.
5. Install Magisk manager apk:
https://mega.nz/file/go0m2RiR#M5UTv6FPjWPtDaGPr-u2tpJMCwdf8uwnniZg69LiGfw
(SafetyNet
Contactless payments with Magisk v23.0 )
How to boot into patched Recovery :
- Restart your phone, when appears the yellow warning on the screen, press and hold Volume Up for ~ 2 sec,
release the button and immediately press and hold again for ~ 2 sec. Repeat it 6-7 times, the device will reboot into Stock Recovery (you can perform Wipe cache or Factory reset, also you can use dload method).
ROOT WITH SUPERUSER:
1. In TWRP flash Zip.file
2. Install Phh Superuser apk .(if needed) https://mega.nz/file/A4sWFYxZ#9KMkvKRgzU7oCvgThPFQOpv_wKAnLZcZVWcJ03HDyNE
Not working: VoLTE, LED notification (at least for me)
Screenshots:
4
Try this way out:
- Install Chrome Beta from market
- Type chrome://flags into the app's address bar
- search flag 'Android SurfaceControl'
- switch to Disabled
- Relaunch
Worked for me on PE_Plus_312.
P.S.: Maybe it also works with other versions of Chrome, I haven't tried.4
Hello, there's only subjectively "best" and that's different for everyone. Everyone has different usage patterns and preferences.
All GSI Treble ROMs that are compatible with P20 lite are AOSP based on 'phhusson' sources, so the difference in performance, battery life, etc. is minimal.
The main differences between these ROMs are in the customization options.
In my experience CAOS is faster, crDRom is customization monster, LiR is a perfect balance between battery efficiency, performance and the customization. And, of course, PixelExperience_Plus also got on the podium. As for DotOS - the previous version 5.1.3 was better, imo.
And all ROMs have some common bugs - offline charging, VoLTE, native callrecording etc.. If you like to take pictures, you will be disappointed with the GSI camera...
The only way you'll find the best one for you is by trying them yourself
.2
On Pixel Exp. some things work easier and more flexible . And I don't think it's just a placebo2
Try this method
https://forum.xda-developers.com/t/migrate-custom-rom-migration-tool.4252863/
There are several options, I do not remember exactly, but I think that the best results I had with Flasher & Helper
