My list of compiled Roms for Motorola Xoom

[Manuellama]

This is the forum for the roms I compile for Motorola Xoom.
I have nicknamed these future roms Moto-Rola for personal reasons. xD
I will try to make them faster and put some cute things on them, even if I start with KitKat versions.
As you all know, I am currently using some of Schischu's sources, I am just following his hard work and making it available for everyone.

This first rom is the Cyanogenmod 11 version for Motorola Xoom Wingray you already know.
I will compile next the Everest version, you will have to try it for me if I am able to do it. I do not have the everest version of the Motorola Xoom so...

https://www.dropbox.com/sh/1fxrnv2ce8fyjyn/AABHGMZcGCYBYqtDSvMMpXC-a?dl=0
Here are the links (up here) It is a dropbox folder with everything you need.

TWRP 3.0.1 recovery with sdcard support.
CM11 for wingray
Open gapps Kitkat pico version
Open gapps Kitkat nano version
Supersu.
Omnirom 4.4.4.
Thank you for your support!


XDA:DevDB Information
Moto-Rola ROMS, ROM for the Motorola Xoom

Contributors
Manuellama
Source Code: https://github.com/Manuellama/android/blob/android-4.4/default.xml

ROM OS Version: 4.4.x KitKat
ROM Firmware Required: BigParted Recovery
Based On: CyanogenMod 11

Version Information
Status: Stable
Current Stable Version: 4.4.4
Stable Release Date: 2017-05-06

Created 2017-05-06
Last Updated 2018-01-20

 

[vlad_popescu47]

Guys with wingray should tell us if they encounter problems. I have the everest, and can't try this.

 

[RaZz0Raus1980]

I am grabbing this to try and get my winray going for the young bloke. I'll report back

---------- Post added at 10:39 AM ---------- Previous post was at 10:18 AM ----------

loaded up fine.. but I didn't do the google account or anything as I figured I'd have to get the "fixed" apk for google play services - but installed version is 11.0.38 - I'll do a factory reset and try a full setup

 

[Manuellama]

It works ok with the gapps included in the folder.

 

[munecito]

loaded up fine.. but I didn't do the google account or anything as I figured I'd have to get the "fixed" apk for google play services - but installed version is 11.0.38 - I'll do a factory reset and try a full setup

What is this fixed apk that you are talking about please?

My Xoom is getting some gaaps stopped, google services stopped, etc that is driving me insane.

---------- Post added at 10:33 PM ---------- Previous post was at 09:50 PM ----------

I am grabbing this to try and get my winray going for the young bloke. I'll report back

---------- Post added at 10:39 AM ---------- Previous post was at 10:18 AM ----------

loaded up fine.. but I didn't do the google account or anything as I figured I'd have to get the "fixed" apk for google play services - but installed version is 11.0.38 - I'll do a factory reset and try a full setup

It works ok with the gapps included in the folder.

FWIW:

Manuellama you are a legend.

I installed these gaaps after a reinstall of cm11 and it does work great indeed. No more stopped services bull***

Thank you so much. I was so upset about loosing my Xoom. I have an Nvidia shield k1 but the Xoom is still a great device to have around.

 

[RaZz0Raus1980]

What is this fixed apk that you are talking about please?
My Xoom is getting some gaaps stopped, google services stopped, etc that is driving me insane

Yep - flashed those files and seems 100% perrrrfect

 

[jubarim]

Hi guys, thanks for the new build!

I would like a question, do I have to follow the procedures to in "BigPart Repartition Upgrade and Resource Center by realjumy" to format for bigpart?

I have a xoom GEDfied - It had a google official release. I am not sure if it was a UMTS or CDMA device before - it has a simcard slot.

I have tried the big part process many times and with no success - in the end, when flashing the CM 11 image, it says it is not a big part device... Is it because I am using wingray images?

Thanks very much!

 

[Manuellama]

In the dropbox folder there is a recovery you can flash, TWRP 3.0.1. with sdcard support...I suppose you need the bigpart thing to flash it.

But here it is how they did it for bigpart.
https://forum.xda-developers.com/showthread.php?t=2506997

 

[jubarim]

In the dropbox folder there is a recovery you can flash, TWRP 3.0.1. with sdcard support...I suppose you need the bigpart thing to flash it.

But here it is how they did it for bigpart.
https://forum.xda-developers.com/showthread.php?t=2506997

Yeah, I have already tried that tutorial (like 10 times) for bigpart, no success.
Maybe it is something with my hardware (I am not sure if it is gsm, cdma or wifi) - everybuild I try says I don't have bigpart partitioning.

I will wait for an everest build

 

[munecito]

Yeah, I have already tried that tutorial (like 10 times) for bigpart, no success.
Maybe it is something with my hardware (I am not sure if it is gsm, cdma or wifi) - everybuild I try says I don't have bigpart partitioning.

I will wait for an everest build

The easier way to know what variant is your Xoom is to check the model number at the back.

The problem you are going to have with most of the late builds is that they need big partition. So you need to find the easy to partition your tablet.

 

[jubarim]

The easier way to know what variant is your Xoom is to check the model number at the back.

The problem you are going to have with most of the late builds is that they need big partition. So you need to find the easy to partition your tablet.

I will attach a picture here, I have not found the variant, I guess it is a prototype unit.

Yeah, bigpart is necessary...

 

[munecito]

https://goo.gl/photos/y8rQj2rNzU2d78PR9
@jubarim See that? My model number is mz601 (Everest) check your model number at the back of the tablet.

 

[jubarim]

Thanks munecito! Mine don't have this sticker, I will post a picture tonight.

 

[munecito]

Well. It will help if you tell us if yours is a wifi only model, LTE? Where did you buy it (country)? Does it have a branded rom installed? Anything at all to identify it.

---------- Post added at 10:14 PM ---------- Previous post was at 10:08 PM ----------

kerry_xu_cs
12-02-2012, 10:47 AM |#10
Member68 posts Thanks: 13

boot into fastboot mode
plug your usb

use
fastboot getvar all
command to check the model

 

[Manuellama]

Uploading everest build to the dropbox folder.
I am not 100% sure it will work, but please try it and tell me.
It will take 1 or 2 hours to upload so now it is still not there.

 

[munecito]

Uploading everest build to the dropbox folder.
I am not 100% sure it will work, but please try it and tell me.
It will take 1 or 2 hours to upload so now it is still not there.

About 4 hours later and still not showing. Maybe the upload was interrupted.

Can't wait to try it.:good:

 

[Manuellama]

My internet failed, I will upload it now.

 

[Manuellama]

Everest uploaded.
I think it will work, but I am not 100% since I do not have an everest xoom.
Please try it, tell me if it works so I can put it on the main post.

 

[vlad_popescu47]

I am going to test Everest. But I have a problem:
In the BigPart Repartition thread they say the following:

Put all needed resources on your microsd card! You will need the original TWRP 2.6.3.0 touch recovery from @runandhide05, TWRP 2.6.3.0 BigPart version, your desired rom, and the BigPart boot image that goes with your desired rom. The BigPart boot images can be found in the next section.

So what versions of TWRP do I put on the SD card? The one from the beginning of the thread is BigPart version?

 

[Manuellama]

It is the Schischu TWRP 3.0.1 recovery with added sd card support. I always do
Fastboot flash recovery recovery.img
If recovery.img is the name of the recovery image.
I cannot guarantee it works.