• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

MyFord Touch Navigation Activation Only

Search This thread

igto

New member
May 12, 2013
2
0
Ford SD navigation maps for the Middle East

Hi
Does anybody know the name/designation of the Ford Navigation Maps SD for the Middle East, and/or where can one find these cards please?
I tried the Here WeGo Company, Ford official dealers and local shops, but no avail so far.
Many thanks for any pointers!
 

omar302

Senior Member
Feb 15, 2006
1,485
558
Doha
Hi
Does anybody know the name/designation of the Ford Navigation Maps SD for the Middle East, and/or where can one find these cards please?
I tried the Here WeGo Company, Ford official dealers and local shops, but no avail so far.
Many thanks for any pointers!

Ford never released a Middle East SD Card for the Sync2 system, so you won't find it.
 

jpeckinp

Senior Member
Sep 9, 2011
247
44
Las Vegas
OK so lets see if I get this right.
I'm currently on 3.10 I need to downgrade to 3.08 do the forscan changes, install the png file and the nav files then install my sdcard and it should work? Then I can update to 3.10 again and not have to worry about any hacks again?

Here is what I've done, and with going back and forth between the forscan site and here it gets confusing.
3.10 was installed a while back
Sister now needs NAV
I did forscan changes
added the nav.png and activated it
tried installing the ag.cab file and get fill to big or some error like that
I do have the "i" on the bottom of the home page and it tells me to install the sdcard but then nothing happens.
 
Last edited:

lenko1

Senior Member
Dec 26, 2016
97
12
Of Roichim's Navigation update file you select the one for Sync 2 version 3.10. You format a USB stick with Fat32 and put the Syncmyride folder (unopened) and the install.lst file on it and apply to your car. When it says file is too big, that sounds like you are opening the Syncmyride folder which you don't do.
 

lenko1

Senior Member
Dec 26, 2016
97
12
Don't unzip everything to the USB. Unzip to your computer. Then open the 3.10 and copy only the Syncmyride folder for 3.10 (unopened) and the Install.lst file to your USB. Then apply this USB to your vehicle. If this doesn't enable navigation then you could put the interrogator file on a USB and apply that to see if it works. Remember to format your USB stick with Fat32 before you put files on it.
 

jpeckinp

Senior Member
Sep 9, 2011
247
44
Las Vegas
Don't unzip everything to the USB. Unzip to your computer. Then open the 3.10 and copy only the Syncmyride folder for 3.10 (unopened) and the Install.lst file to your USB. Then apply this USB to your vehicle. If this doesn't enable navigation then you could put the interrogator file on a USB and apply that to see if it works. Remember to format your USB stick with Fat32 before you put files on it.
That did it. Thanks
 

DragoChomp

New member
Oct 29, 2020
2
0
Hey guys, I'm using 3.08 and trying to do this. I'm using Riochims files from page 94.
I'm getting all the way through and my main screen has changed to show "Insert nav. SD card" however when I check my System Information it doesn't display any Nav software details.
I'm sure someone else had this issue but I cannot refind that post.

Any help will be greatly appreciated!
Thanks!
 

sergioo0

New member
Feb 2, 2021
4
0
Vinc, your 3.08 Navigation Update file is old and 3.10 is incomplete. Use the following AF / AG Navigation Update as future reference:

https://mega.nz/#!xtQBCRhY!g4x3KVBFncz0MGraP0i_dNP6uS-M3s4RhTv85JsjozA

These versions will not require a MFT master reset after NaviPatch.png :)

Plus, here's the full 3.10.16180 European revised update (EU-Lang pack3 EN-GB_DE-DE_FR-FR_IT-IT) as I got tired of all the trouble versions floating around:

https://mega.nz/#!M1Jh1LhD!KnpCrzB-xY1FHw2bdvmg0KFNGzwzUm9aGC8ngu0_m4A

Possible 3.10 EU language packs are:
1. EULangpack1 DE-DE_EN-GB_RU-RU_TR-TR http://ivsu.binaries.ford.com/swparts/EA5T-14F497-BF_64703.ZIP
2. EULangpack2 DE-DE_EN-GB_PL-PL_RU-RU http://ivsu.binaries.ford.com/swparts/EA5T-14F497-CF_64704.ZIP
3. EULangpack3 DE-DE_EN-GB_FR-FR_IT-IT http://ivsu.binaries.ford.com/swparts/EA5T-14F497-DF_64705.ZIP
4. EULangpack4 DE-DE_EN-GB_FR-FR_SV-SE http://ivsu.binaries.ford.com/swparts/EA5T-14F497-EF_64706.ZIP
5. EULangpack5 EN-GB_ES-ES_FR-FR_PT-PT http://ivsu.binaries.ford.com/swparts/EA5T-14F497-FF_64707.ZIP
6. EULangpack6 DE-DE_EN-GB_FR-FR_NL-NL http://ivsu.binaries.ford.com/swparts/EA5T-14F497-GF_64708.ZIP
by replacing the EA5T-14F497-xF file inside SyncMyRide folder and inside autoinstall.lst

And here is the full 3.10.16180 US revised update (NA-Lang pack EN-US_FR-CA_ES-US for Ford/Lincoln, VHR discontinued and removed)

https://mega.nz/#!Jk4hzSZD!NNOw8g9BkciF4GREYnzCL3i5gokxCemgAzykCi47NMw

Possible 3.10 US language packs are:
1. South America EN-US_PT-US_ES-US http://ivsu.binaries.ford.com/swparts/EA5T-14F497-HE_64709.ZIP
2. Australia EN-AU http://ivsu.binaries.ford.com/swparts/EA5T-14F497-LF_64711.ZIP
by replacing the EA5T-14F497-xE file inside SyncMyRide folder and inside autoinstall.lst

Ignore the final 3.8 confirmation prompt, it's 3.10. In case anyone wants a different splashscreen, it can be installed easily by modifying autoinstall.lst in the following installation:

https://mega.nz/#!V44iWKBC!Gflsjkh4gVsz5vFIlPL8_g7r1JmrqSx6Nxp-H3k3tg0

EA5T-14F496-MA - Custom Animation application (FOR FORD F-150 RAPTOR).
EA5T-14F496-PA - Custom Animation application (FOR MUSTANG).
EA5T-14F496-RA - Custom Animation application (FOR LINCOLN BLACK LABEL).
EA5T-14F496-SA - Custom Animation application (FOR LINCOLN PRESIDENTIAL).
EA5T-14F496-TB - Custom Animation application (FOR FORD MONDEO VIGNALE).
EA5T-14F496-UA - Custom animation application (FOR EU MARKET FORD VEHICLES).
 

sergioo0

New member
Feb 2, 2021
4
0
Vinc, your 3.08 Navigation Update file is old and 3.10 is incomplete. Use the following AF / AG Navigation Update as future reference:

https://mega.nz/#!xtQBCRhY!g4x3KVBFncz0MGraP0i_dNP6uS-M3s4RhTv85JsjozA

These versions will not require a MFT master reset after NaviPatch.png :)

Plus, here's the full 3.10.16180 European revised update (EU-Lang pack3 EN-GB_DE-DE_FR-FR_IT-IT) as I got tired of all the trouble versions floating around:

https://mega.nz/#!M1Jh1LhD!KnpCrzB-xY1FHw2bdvmg0KFNGzwzUm9aGC8ngu0_m4A

Possible 3.10 EU language packs are:
1. EULangpack1 DE-DE_EN-GB_RU-RU_TR-TR http://ivsu.binaries.ford.com/swparts/EA5T-14F497-BF_64703.ZIP
2. EULangpack2 DE-DE_EN-GB_PL-PL_RU-RU http://ivsu.binaries.ford.com/swparts/EA5T-14F497-CF_64704.ZIP
3. EULangpack3 DE-DE_EN-GB_FR-FR_IT-IT http://ivsu.binaries.ford.com/swparts/EA5T-14F497-DF_64705.ZIP
4. EULangpack4 DE-DE_EN-GB_FR-FR_SV-SE http://ivsu.binaries.ford.com/swparts/EA5T-14F497-EF_64706.ZIP
5. EULangpack5 EN-GB_ES-ES_FR-FR_PT-PT http://ivsu.binaries.ford.com/swparts/EA5T-14F497-FF_64707.ZIP
6. EULangpack6 DE-DE_EN-GB_FR-FR_NL-NL http://ivsu.binaries.ford.com/swparts/EA5T-14F497-GF_64708.ZIP
by replacing the EA5T-14F497-xF file inside SyncMyRide folder and inside autoinstall.lst

And here is the full 3.10.16180 US revised update (NA-Lang pack EN-US_FR-CA_ES-US for Ford/Lincoln, VHR discontinued and removed)

https://mega.nz/#!Jk4hzSZD!NNOw8g9BkciF4GREYnzCL3i5gokxCemgAzykCi47NMw

Possible 3.10 US language packs are:
1. South America EN-US_PT-US_ES-US http://ivsu.binaries.ford.com/swparts/EA5T-14F497-HE_64709.ZIP
2. Australia EN-AU http://ivsu.binaries.ford.com/swparts/EA5T-14F497-LF_64711.ZIP
by replacing the EA5T-14F497-xE file inside SyncMyRide folder and inside autoinstall.lst

Ignore the final 3.8 confirmation prompt, it's 3.10. In case anyone wants a different splashscreen, it can be installed easily by modifying autoinstall.lst in the following installation:

https://mega.nz/#!V44iWKBC!Gflsjkh4gVsz5vFIlPL8_g7r1JmrqSx6Nxp-H3k3tg0

EA5T-14F496-MA - Custom Animation application (FOR FORD F-150 RAPTOR).
EA5T-14F496-PA - Custom Animation application (FOR MUSTANG).
EA5T-14F496-RA - Custom Animation application (FOR LINCOLN BLACK LABEL).
EA5T-14F496-SA - Custom Animation application (FOR LINCOLN PRESIDENTIAL).
EA5T-14F496-TB - Custom Animation application (FOR FORD MONDEO VIGNALE).
EA5T-14F496-UA - Custom animation application (FOR EU MARKET FORD VEHICLES).
Vinc, your 3.08 Navigation Update file is old and 3.10 is incomplete. Use the following AF / AG Navigation Update as future reference:

https://mega.nz/#!xtQBCRhY!g4x3KVBFncz0MGraP0i_dNP6uS-M3s4RhTv85JsjozA

These versions will not require a MFT master reset after NaviPatch.png :)

Plus, here's the full 3.10.16180 European revised update (EU-Lang pack3 EN-GB_DE-DE_FR-FR_IT-IT) as I got tired of all the trouble versions floating around:

https://mega.nz/#!M1Jh1LhD!KnpCrzB-xY1FHw2bdvmg0KFNGzwzUm9aGC8ngu0_m4A

Possible 3.10 EU language packs are:
1. EULangpack1 DE-DE_EN-GB_RU-RU_TR-TR http://ivsu.binaries.ford.com/swparts/EA5T-14F497-BF_64703.ZIP
2. EULangpack2 DE-DE_EN-GB_PL-PL_RU-RU http://ivsu.binaries.ford.com/swparts/EA5T-14F497-CF_64704.ZIP
3. EULangpack3 DE-DE_EN-GB_FR-FR_IT-IT http://ivsu.binaries.ford.com/swparts/EA5T-14F497-DF_64705.ZIP
4. EULangpack4 DE-DE_EN-GB_FR-FR_SV-SE http://ivsu.binaries.ford.com/swparts/EA5T-14F497-EF_64706.ZIP
5. EULangpack5 EN-GB_ES-ES_FR-FR_PT-PT http://ivsu.binaries.ford.com/swparts/EA5T-14F497-FF_64707.ZIP
6. EULangpack6 DE-DE_EN-GB_FR-FR_NL-NL http://ivsu.binaries.ford.com/swparts/EA5T-14F497-GF_64708.ZIP
by replacing the EA5T-14F497-xF file inside SyncMyRide folder and inside autoinstall.lst

And here is the full 3.10.16180 US revised update (NA-Lang pack EN-US_FR-CA_ES-US for Ford/Lincoln, VHR discontinued and removed)

https://mega.nz/#!Jk4hzSZD!NNOw8g9BkciF4GREYnzCL3i5gokxCemgAzykCi47NMw

Possible 3.10 US language packs are:
1. South America EN-US_PT-US_ES-US http://ivsu.binaries.ford.com/swparts/EA5T-14F497-HE_64709.ZIP
2. Australia EN-AU http://ivsu.binaries.ford.com/swparts/EA5T-14F497-LF_64711.ZIP
by replacing the EA5T-14F497-xE file inside SyncMyRide folder and inside autoinstall.lst

Ignore the final 3.8 confirmation prompt, it's 3.10. In case anyone wants a different splashscreen, it can be installed easily by modifying autoinstall.lst in the following installation:

https://mega.nz/#!V44iWKBC!Gflsjkh4gVsz5vFIlPL8_g7r1JmrqSx6Nxp-H3k3tg0

EA5T-14F496-MA - Custom Animation application (FOR FORD F-150 RAPTOR).
EA5T-14F496-PA - Custom Animation application (FOR MUSTANG).
EA5T-14F496-RA - Custom Animation application (FOR LINCOLN BLACK LABEL).
EA5T-14F496-SA - Custom Animation application (FOR LINCOLN PRESIDENTIAL).
EA5T-14F496-TB - Custom Animation application (FOR FORD MONDEO VIGNALE).
EA5T-14F496-UA - Custom animation application (FOR EU MARKET FORD VEHICLES).
HI, Rioachim, i have install you first file (https://mega.nz/#!M1Jh1LhD!KnpCrzB-xY1FHw2bdvmg0KFNGzwzUm9aGC8ngu0_m4A) and my problem is maybe i dont take the good file, i have need the language pack french canadian whats is possible to add my language pack , how i have to do...thank
 

rioachim

Senior Member
Jul 4, 2011
271
93
You installed European update instead of US/CA one? You need to downgrade to 3.08 and update to the right 3.10 package. Search this thread on how to do it.
 

Mustang In Black

New member
Feb 6, 2021
2
0
Vinc, your 3.08 Navigation Update file is old and 3.10 is incomplete. Use the following AF / AG Navigation Update as future reference:

https://mega.nz/#!xtQBCRhY!g4x3KVBFncz0MGraP0i_dNP6uS-M3s4RhTv85JsjozA

These versions will not require a MFT master reset after NaviPatch.png :)

Plus, here's the full 3.10.16180 European revised update (EU-Lang pack3 EN-GB_DE-DE_FR-FR_IT-IT) as I got tired of all the trouble versions floating around:

https://mega.nz/#!M1Jh1LhD!KnpCrzB-xY1FHw2bdvmg0KFNGzwzUm9aGC8ngu0_m4A

Possible 3.10 EU language packs are:
1. EULangpack1 DE-DE_EN-GB_RU-RU_TR-TR http://ivsu.binaries.ford.com/swparts/EA5T-14F497-BF_64703.ZIP
2. EULangpack2 DE-DE_EN-GB_PL-PL_RU-RU http://ivsu.binaries.ford.com/swparts/EA5T-14F497-CF_64704.ZIP
3. EULangpack3 DE-DE_EN-GB_FR-FR_IT-IT http://ivsu.binaries.ford.com/swparts/EA5T-14F497-DF_64705.ZIP
4. EULangpack4 DE-DE_EN-GB_FR-FR_SV-SE http://ivsu.binaries.ford.com/swparts/EA5T-14F497-EF_64706.ZIP
5. EULangpack5 EN-GB_ES-ES_FR-FR_PT-PT http://ivsu.binaries.ford.com/swparts/EA5T-14F497-FF_64707.ZIP
6. EULangpack6 DE-DE_EN-GB_FR-FR_NL-NL http://ivsu.binaries.ford.com/swparts/EA5T-14F497-GF_64708.ZIP
by replacing the EA5T-14F497-xF file inside SyncMyRide folder and inside autoinstall.lst

And here is the full 3.10.16180 US revised update (NA-Lang pack EN-US_FR-CA_ES-US for Ford/Lincoln, VHR discontinued and removed)

https://mega.nz/#!Jk4hzSZD!NNOw8g9BkciF4GREYnzCL3i5gokxCemgAzykCi47NMw

Possible 3.10 US language packs are:
1. South America EN-US_PT-US_ES-US http://ivsu.binaries.ford.com/swparts/EA5T-14F497-HE_64709.ZIP
2. Australia EN-AU http://ivsu.binaries.ford.com/swparts/EA5T-14F497-LF_64711.ZIP
by replacing the EA5T-14F497-xE file inside SyncMyRide folder and inside autoinstall.lst

Ignore the final 3.8 confirmation prompt, it's 3.10. In case anyone wants a different splashscreen, it can be installed easily by modifying autoinstall.lst in the following installation:

https://mega.nz/#!V44iWKBC!Gflsjkh4gVsz5vFIlPL8_g7r1JmrqSx6Nxp-H3k3tg0

EA5T-14F496-MA - Custom Animation application (FOR FORD F-150 RAPTOR).
EA5T-14F496-PA - Custom Animation application (FOR MUSTANG).
EA5T-14F496-RA - Custom Animation application (FOR LINCOLN BLACK LABEL).
EA5T-14F496-SA - Custom Animation application (FOR LINCOLN PRESIDENTIAL).
EA5T-14F496-TB - Custom Animation application (FOR FORD MONDEO VIGNALE).
EA5T-14F496-UA - Custom animation application (FOR EU MARKET FORD VEHICLES).



Hello
I updated my Sync 2 to 3.10. It worked .. Now I wanted to upload the Navi files via USB stick .. The file was too big and Sync 2 hung up. Fuse pulled from Sync 2. Now it can be operated again ... but the clock is gone..Climate temperatures are gone..Usb and Sd symbols are gone. and for entertainment the display shows undefined. Can someone help me ?
 

kafe4ever

Senior Member
Oct 21, 2010
52
12
Hi there, currently I am running Sync 2 3.08 SW version with origial navigation on my Ford Grand C-Max 2016. It is safe to update to 3.10 version posted by rioachim? (will be necessary to somehow re-enable navigation SW, or it will be ok?)

Sorry for noob question but I better Look before I leap.
 

lenko1

Senior Member
Dec 26, 2016
97
12
Hi there, currently I am running Sync 2 3.08 SW version with origial navigation on my Ford Grand C-Max 2016. It is safe to update to 3.10 version posted by rioachim? (will be necessary to somehow re-enable navigation SW, or it will be ok?)

Sorry for noob question but I better Look before I leap.

You can but you may also have to use his Navigationupdate file for 3.10.
 

Wicked RS

Member
Feb 27, 2021
5
0
South Africa
Hi all. I am in South Africa. I own a 2016 Ford Focus RS AWD with Sync2 .It is currently on S/W version 3.08.15128.EA.10_PRODUCT. I have installed the Navipatch and Nav SW, unlocked the Navigation on the unit. The problem I am facing is, when i install the SD card into the SD slot, I get "Navigation SD card error" " Please insert valid SD card" Tried many times same result. One thing I have to mention, the SD card with the maps is not available in my country. I registered then downloaded the maps from Ford.naviextras.com . It does say maps for Sync 3 update?? I inserted the SD into a card reader and then stuck that into one of the usb ports in the car and I get this message "Bad installation file, one or more of the files being installed on your system did not install successfully" I am now stuck. Is this because of the Map version I have? Should I update the Sync2 to Version 3.10? Where can I find the maps for Sync 2 for Africa/Southern Africa?
Top
 

Top Liked Posts

  • There are no posts matching your filters.
  • 13
    people ask what I need to activate the navigation?
    1. update Sync2 system to version 3.8.15128
    US ONLY : HERE
    For EUROPE : HERE
    and others language pack
    Language Pack 1 - German, English (British), Russian, Turkish:
    http://ivsu.binaries.ford.com/swparts/Gen2v38build15128updatepackageEULangpack1Rev4.zip

    Language Pack 2 - German, English (British), Polish, Russian:
    http://ivsu.binaries.ford.com/swparts/Gen2v38build15128updatepackageEULangpack2Rev4.zip

    Language Pack 3 - German, English (British), French, Italian:
    http://ivsu.binaries.ford.com/swpart...gpack3Rev4.zip

    Language Pack 4 - German, English (British), French, Swedish:
    http://ivsu.binaries.ford.com/swpart...gpack4Rev4.zip

    Language Pack 5 - English (British), Spanish, French, Portuguese:
    http://ivsu.binaries.ford.com/swpart...gpack5Rev4.zip

    Language Pack 6 - German, English (British), French, Dutch:
    http://ivsu.binaries.ford.com/swpart...gpack6Rev4.zip

    2. with Forscan Extended License you have to change APIM Navigation configuration (7d0-01-02. Byte 1 = 00 No Nav. Byte 1 = 04 with Nav);
    3. install license (send me PM)
    4. to work you need to have the map A (x) for the United States and F (x) for Europe
    12
    How to active MyfordTouch Navigation

    As noted by flsdiver in the previous myfordtouch thread
    (http://forum.xda-developers.com/win...rd-touch-hack-enable-features-t3321397/page13)

    Modify the APIM as-built data using Forscan (you will need to request an extended license for Forscan)
    You will also need a ELM327 device that can do HSCAN/MSCAN.

    1) Program APIM using Forscan & ELM327 device. Change the as built data bit with
    (7d0-01-02. Byte 1 = 00 No Nav. Byte 1 = 04 with Nav)
    Turn key off, turn on, sync black screen for a bit, then performing routine system maintenance.... for about 2 mins.

    *Unknown if ACM as built data bit needs to be changed yet.
    2) Program ACM as build with bit mentioned in this thread. Not sure needed/what it does but I did it anyway.

    3) New method seems to be either getting a license file from vincentka post 535 (http://forum.xda-developers.com/showpost.php?p=68993515&postcount=535)
    OR
    Using the PNG file described here https://www.drive2.ru/l/10018006/ posted by rmcgry
    http://forum.xda-developers.com/showpost.php?p=69046248&postcount=545

    Download license (BT4T-14F500-BE) from URL attached in the excel document. You will need to replace “YAABBCCD” in the URL section and provide your vehicle’s ESN number otherwise it won’t work. This appears to be case sensitive so make sure it is all uppercase letters.
    You can get the ESN number in the settings section on the myfordtouchunit. You do not need to change anything else in the URL.

    *To do non-north america and non-latest software you will need all the proper field values for your vehicle from the as build and from the current software installed on the vehicle.
    All credit goes to flsdiver for the URL/Excel doc/steps needed.
    *Ford could change this URL and this would no longer work!


    4) *This step may not be needed depending on if you are using the PNG file method. Create the USB device and edit the autoinstall.lst file to only install the BT4T-14F500-BE file.
    5) Stick in A7 nav SD Card.
    6) Enjoy the trip!
    9
    For the long winded explanation, and those that what to put the pieces together...

    Background:
    APIM = Accessory Protocol Interface Module it is what holds the software that runs MFT.
    ACM = Audio Control Module (Radio)
    IPC = Instrument Panel Control Module
    ESN = APIM Serial Number.
    The Module Id of the APIM is 7D0 on the can-bus.
    The APIM must be programmed with as build data to turn on NAV, more on that later.
    I programmed the APIM bits via obdII 1st then did the nav/license install, not sure order matters or not.
    Optionally the ACM bit can be set (this is very vehicle specific).
    The NAV software license must be installed on the APIM via a normal USB update process.
    The NAV software license must be digitally signed by f0rd for the serial number (ESN) that is on your APIM.
    See other discussions for why one license file does not work in all vehicles (or you wouldn't be reading this thread, everyone would have NAV)
    When done correctly you will see the license show up on the MFT license screen.

    Sources of data regarding your APIM:

    1) Get the As Build data for your vehicle.
    this contains some of the values needed to build the software unlocker url and contains the 7d0
    motorcraftservice.com/AsBuilt put in VIN
    download file and save as xml (it's easier to read than .ab with simple browser)
    also, i save this page as html file (ctrls) so that i can easily reference the modules/addresses and compare data for apim/acm.

    this is sample of 7d0 apim as build data that determines what is or is not installed on your vehicle
    Code:
    	APIM
    		7D0-01-01 	2AAA 	0006 	03B6 	 
    	 	7D0-01-02 	0409 	0604 	8071 	 
    	 	7D0-02-01 	5553 	0103 	8006 	 
     		7D0-02-02 	0200 	0000 	00DD 	 
    	 	7D0-02-03 	0000 	DC 	 	 
     		7D0-03-01 	2055 	5203 	00A5 	 
    	 	7D0-04-01 	0103 	0201 	00E3 	 
     		7D0-04-02 	0101 	DF 	 	 
    	Instrument Panel Control Module
    	IPC 	720-01-01 	2C0B 	1064 	6034 	
    	IPC 	720-01-02 	2013 	106D 	 	
    	IPC 	720-02-01 	4DC0 	3C31 	3CE0 	
    	IPC 	720-02-02 	1000 	A9E4 	 	
    	IPC 	720-03-01 	2805 	5400 	00AC 	
    	IPC 	720-03-02 	C848 	013D 	 	
    	IPC 	720-04-01 	C441 	0000 	0031 	
    	IPC 	720-04-02 	5553 	00D5 	 	
    	IPC 	720-05-01 	0000 	0000 	002D 	
    	IPC 	720-05-02 	0000 	113F 	 	
    	IPC 	720-06-01 	0000 	0000 	002E 	
    	IPC 	720-06-02 	0000 	002F 	 	
    	IPC 	720-07-01 	8401 	88A0 	603C 	
    	IPC 	720-07-02 	0000 	0030 	 	
    	Audio Control Module
    	ACM 	727-01-01 	1801 	1808 	0069 	
    	ACM 	727-01-02 	0600 	37 	 	
    	ACM 	727-02-01 	5B8C 	 	 	
    	ACM 	727-03-01 	1446 	 	 	
    	ACM 	727-04-01 	0001 	0155 	53DD
    This is an excerpt from the as build file that contains the software values for the apim, you will need this to build proper software download url.
    Code:
    	<NODEID>
    	7D0
    	<F110>DS-ET4T-14D212-AB</F110>
    	<F111>ES7T-14F130-BA</F111>
    	<F113>ES7T-14D212-DA</F113>
    	<F188>EM5T-14D205-AD</F188>
    	</NODEID>
    2) Software Installation Report
    this comes from the usb stick that you used to do your last update.
    or you may put the SYNCStatusChecker.zip on a usb stick, put it in your car, turn on key, it will install the report on your usb stick.
    look in the syncmyride folder for xml file that is in the format Sync_<esn>_<vin>.xml
    this file contains all the information you should need to do the software download!
    below is an excerpt from this software report.
    <VIN> <ESN> <HardwareFordPartNumber> <ImageFPN> <VMCUFordPartNumber> <FPN> (2nd application is for nav in this case)
    Code:
      <Vehicle>
    	<VIN>1FTEW1EG2FFA47262</VIN>
    		<DisplayType>0A</DisplayType>
    	<ModuleHW>
    		<ESN>YAABBCCD</ESN>
    		<MACAddress>001122334455</MACAddress>
    		<WIFIMACAddress>0011223344</WIFIMACAddress>
    	<HardwareFordPartNumber>ES7T-14F130-BA</HardwareFordPartNumber>
    	<CCPU>
    		<ImageFPN>EA5T-14D544-AD</ImageFPN>
    		<Version>6.0.15065.0.0</Version>
    		<OEMVersion>3.08.15128.EA.10_PRODUCT </OEMVersion>
       <Applications>
    	<Application>
    		<GUID>{00000000-0000-0000-0000-000000000000}</GUID>
    		<FPN>EA5T-14F496-AD</FPN>
    		<Version>0.0.0.0</Version>
    		<Name>EA5T-14F496-AD</Name>
    	</Application>
    	<Application>
    		<GUID>{00000000-0000-0000-0000-000000000000}</GUID>
    		<FPN>EA5T-14F657-AD</FPN>
    		<Version>0.0.0.0</Version>
    		<Name>EA5T-14F657-AD</Name>
    	</Application>
       ...
       <VMCU>
    	<VMCUFordPartNumber>EM5T-14D205-AD</VMCUFordPartNumber>
    	<Version>Vector_VMCU_02.04.31</Version>
       </VMCU>
    3) Alternatively you can get most of this same information from the diagnostic screen.
    Radio off, key on, eject button hold, still holding eject hold the right (next ) button.
    Cancel tone test
    Goto APIM Diagnostic/Part Numbers
    Find on screen -
    APIM Serial Number: <ESN>
    H/W Part Number: <HardwareFordPartNumber>
    CCPU S/W Part Number: <ImageFPN>
    VMCU S/W Part Number : <VMCUFordPartNumber>
    This would leave you to guess your particular NAV pack. <FPN>, usually EA5T-14F657-AD for north america.

    You can use all of this data above, from your vehicle, map it to line 7 of excel, it will generate the url on line 8 for you.
    Download the software, confirm that you have BT4T-14D546-EE in the zip, this is the NAV software license.
    Unzip to USB stick, let this install run just like any normal sync update.
    After update you should be able to go to Settings/System/Install Applications/View Software License and see the nav license on your MFT.


    APIM Programming
    You will need to download Forscan software.
    You will need a good OBDII Forscan compatible OBDII interface.
    Old Real Elm327s with MSCAN/HSCAN switch, or other good interfaces, not the cheap $5 elms on ebay 99.9% will not work.
    Consult Forscan site for more on compatible interfaces.
    Connect Interface and Forscan, let it scan modules.
    Configuration Programming select APIM as build.

    The important thing to set is one bit at 7D0-01-02 00 needs to be 7D0-01-02 04 in all cases we have seen so far.
    7D0-01-02 0009 0604 806D No Nav
    7D0-01-02 0409 0604 8071 Nav
    The checksum (last byte), is the sum of all other bytes on that line
    Checksum for this can be simple, just add 04 hex, so 6D + 04 = 71. See post #7 for good explaination on checksum.
    Your numbers will be different for your vehicle.
    The 1st byte 00/04 and the last checksum are all that need be changed.
    Forscan may or may not calculate this checksum dynamically, i don't remember.
    After doing this the MFT will reboot.
    At which time, you should have nav.

    You will need an SD map card (A7 is current) in the vehicle to use NAV. Go buy one, so that Here maps gets paid.

    Please do not post the url in this thread. Build and download your own.

    Attached a simplified excel with clearer header with entries attached.


    Edit:
    Climate in lower right quadrant can also be enabled. Post #69
    8
    Managed to use a "backup" of maps SD card today. :D
    8
    Sync2 USB update package to 3.10 (16180) version for North America.
    Standard Ford splash screen (not Lincoln, Vignale or Mustang...).
    Checked. Seems to work.
    Made on the original packages, so comments on the functioning should be addressed directly to Ford. :cool:

    Please disregard the information on the screen that it is the 3.08 update. Ford didn't do messages about 3.10 update , so I used those messages from 3.08 that everything was as it should be.

    https://1drv.ms/u/s!Ales_ZTMf8IEhORa6Fk_xiVLe3kSEg

    Important note - the contents of the package for real navi license for versions 15128 and 16180 is different.
    If someone will want to order real navi license from me, must clearly indicate to which version license to be generated.