• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[N10+ SM-N975U/U1/W_Snapdragon]-[Upgrade Easily Firmware Using Odin]-[Automatically Root Remove Forceencrypt Patch Bluetooth And Fix Safetynet]

Search This thread

jrkruse

Recognized Contributor
Aug 9, 2009
8,176
12,463
Must Have An Unlocked Bootloader To Do This!

This An odin tar file I have created to flash along with stock odin firmware to automatically install TWRP recovery along with Disable VBMETA image. The tar file will also automatically install magisk root along with remove force encryption and patch bluetooth library file. It will also patch safetynet. No flashing of zips is required

Info For Bootloader Unlocks Can Be Found In Post 2

I Do Not Recommend Mixing Bit 5 With Higher Firmware!!!!
Unless Using Bit Safe Firmware That Is Patched

Downloads
SM-N975U/U1/W- Model

USERDATA_AIO_N975_FORCE_WIPE_10_10_21.tar.md5 --Use on android 10 or 11
This will force a wipe of data no mater what.

Full Odin 3.1.1 Bit1 Safe Firmware
N975USQS7FUH3_BIT5_SAFE.7z
This are odin files and will safely update all image files too bit 7 and keep bit 5 bootloaders. Unfortunately this will wipe data this is beyond my control as it seems to be a side affect of mixing firmware it causes data not to mount and therefore my AIO will format it. This is full firmware with USERDATA_AIO. This will put you on U firmware. Before flashing I recommend removing your google account and make sure in download mode you are not frp locked
If above USERDATA_AIO_N975_FORCE_WIPE_08_30_21.tar.md5 is newer than the one in this zip use the newer one from above


Odin3_v3.14.1_3B_PatcheD.zip


Files For SM-N970 Found Here

TWRP Recovery Provide by @afaneh92

Be prepared to have your data wiped. The process tries to determine if you do or do not need to have data wipe but as a precaution just assume your data will be wiped. Especially if using U1 or W firmware

Install Instructions For Newly Unlocked Devices

You must be OEM Unlocked Bootloader
1. On Initial unlock of phone you must through setup and be signed into your google account.

2. Reboot phone too download mode and make sure KG STATUS=CHECKING (see pic) and not PRENORMAL. If PRENORMAL then do step 1 again

View attachment 5217631

3. Use patched 3.14 odin and load file USERDATA_SLOT_*9**U_**.tar.md5 you must choose one of the FORCE_WIPE files and load in the USERSDATA slot of odin and flash file

4. Phone will reboot to TWRP and remove encryption which will wipe phone. Phone will reboot back too TWRP to finish install then reboot to setup



Install Instructions For Updating Firmware On Phone Already Unlocked

1. Reboot phone too download mode and make sure KG STATUS=CHECKING. If not see above

2. Use patched 3.14 odin and load stock firmware in appropriate slots use regular CSC file in the CSC slot and load file one of the USERDATA_SLOT_*9**U_**.tar.md5 in the USERSDATA slot of odin and flash firmware. Do not use the User Data file that comes with firmware.

3. Phone will reboot to TWRP and check for encryption and remove if needed which will wipe phone. If phone is not encrypted data will not be wiped. Phone will reboot back too TWRP to finish install then reboot to setup if data was wiped or reboot normally if it was not



Install Instructions If Updating Images With TWRP

1. When done flashing images in TWRP Reboot phone too download mode and make sure KG STATUS=CHECKING. If not see above.

2. Use patched 3.14 odin and load file USERDATA_AIO_*9**_NO_WIPE_NO_BL.tar.md5 in the USERSDATA slot of odin and flash file.

3. Phone will reboot to TWRP and check for encryption and remove if needed which will wipe phone. If phone is not encrypted data will not be wiped. Phone will reboot back too TWRP to finish install then reboot to setup if data was wiped or reboot normally if it was not.

4. Alternatively to using USERDATA_AIO_*9**_NO_WIPE_NO_BL.tar.md5 in odin you can use AIO_Magisk_21_4_N10U_US_Series_Android_R.zip found in post 2



Features
No patches or mod zips are needed phone will already be rooted

Fix Safetynet
Bluetooth is patched for pairing to survive reboots

Samsung Health working


Bugs
Samsung Pay, Secure Folder and Samsung Pass do not work as on most Samsung Rooted Roms


Thanks To People That Make My Life Easier
@elliwigy

@klabit87
@Krog18
@me2151
@stang5litre
@Raymonf for modified odin
@rayan-refoua for boot animation
@TheMadScientist
@afaneh92
@kdrag0n for safetynet fix

3arthur6 for bluetooth patch zip
@JDBarlow for test S20 stuff
 
Last edited:

donkeyman1234

Senior Member
Dec 29, 2009
133
15
Huawei Mate 20 Pro
Sony Xperia 1 II
This An odin tar file I have created to flash along with stock odin firmware to automatically install TWRP recovery along with Disable VBMETA image. The tar file will also automatically install magisk root along with remove force encryption and patch bluetooth library file. It will also patch safetynet. No flashing of zips is required
I am interested in how to make this kind of files with everything intact, can you point out the procedures for me? Thanks!
 

Top Liked Posts

  • There are no posts matching your filters.
  • 2
    Must Have An Unlocked Bootloader To Do This!

    This An odin tar file I have created to flash along with stock odin firmware to automatically install TWRP recovery along with Disable VBMETA image. The tar file will also automatically install magisk root along with remove force encryption and patch bluetooth library file. It will also patch safetynet. No flashing of zips is required

    Info For Bootloader Unlocks Can Be Found In Post 2

    I Do Not Recommend Mixing Bit 5 With Higher Firmware!!!!
    Unless Using Bit Safe Firmware That Is Patched

    Downloads
    SM-N975U/U1/W- Model

    USERDATA_AIO_N975_FORCE_WIPE_10_10_21.tar.md5 --Use on android 10 or 11
    This will force a wipe of data no mater what.

    Full Odin 3.1.1 Bit1 Safe Firmware
    N975USQS7FUH3_BIT5_SAFE.7z
    This are odin files and will safely update all image files too bit 7 and keep bit 5 bootloaders. Unfortunately this will wipe data this is beyond my control as it seems to be a side affect of mixing firmware it causes data not to mount and therefore my AIO will format it. This is full firmware with USERDATA_AIO. This will put you on U firmware. Before flashing I recommend removing your google account and make sure in download mode you are not frp locked
    If above USERDATA_AIO_N975_FORCE_WIPE_08_30_21.tar.md5 is newer than the one in this zip use the newer one from above


    Odin3_v3.14.1_3B_PatcheD.zip


    Files For SM-N970 Found Here

    TWRP Recovery Provide by @afaneh92

    Be prepared to have your data wiped. The process tries to determine if you do or do not need to have data wipe but as a precaution just assume your data will be wiped. Especially if using U1 or W firmware

    Install Instructions For Newly Unlocked Devices

    You must be OEM Unlocked Bootloader
    1. On Initial unlock of phone you must through setup and be signed into your google account.

    2. Reboot phone too download mode and make sure KG STATUS=CHECKING (see pic) and not PRENORMAL. If PRENORMAL then do step 1 again

    View attachment 5217631

    3. Use patched 3.14 odin and load file USERDATA_SLOT_*9**U_**.tar.md5 you must choose one of the FORCE_WIPE files and load in the USERSDATA slot of odin and flash file

    4. Phone will reboot to TWRP and remove encryption which will wipe phone. Phone will reboot back too TWRP to finish install then reboot to setup



    Install Instructions For Updating Firmware On Phone Already Unlocked

    1. Reboot phone too download mode and make sure KG STATUS=CHECKING. If not see above

    2. Use patched 3.14 odin and load stock firmware in appropriate slots use regular CSC file in the CSC slot and load file one of the USERDATA_SLOT_*9**U_**.tar.md5 in the USERSDATA slot of odin and flash firmware. Do not use the User Data file that comes with firmware.

    3. Phone will reboot to TWRP and check for encryption and remove if needed which will wipe phone. If phone is not encrypted data will not be wiped. Phone will reboot back too TWRP to finish install then reboot to setup if data was wiped or reboot normally if it was not



    Install Instructions If Updating Images With TWRP

    1. When done flashing images in TWRP Reboot phone too download mode and make sure KG STATUS=CHECKING. If not see above.

    2. Use patched 3.14 odin and load file USERDATA_AIO_*9**_NO_WIPE_NO_BL.tar.md5 in the USERSDATA slot of odin and flash file.

    3. Phone will reboot to TWRP and check for encryption and remove if needed which will wipe phone. If phone is not encrypted data will not be wiped. Phone will reboot back too TWRP to finish install then reboot to setup if data was wiped or reboot normally if it was not.

    4. Alternatively to using USERDATA_AIO_*9**_NO_WIPE_NO_BL.tar.md5 in odin you can use AIO_Magisk_21_4_N10U_US_Series_Android_R.zip found in post 2



    Features
    No patches or mod zips are needed phone will already be rooted

    Fix Safetynet
    Bluetooth is patched for pairing to survive reboots

    Samsung Health working


    Bugs
    Samsung Pay, Secure Folder and Samsung Pass do not work as on most Samsung Rooted Roms


    Thanks To People That Make My Life Easier
    @elliwigy

    @klabit87
    @Krog18
    @me2151
    @stang5litre
    @Raymonf for modified odin
    @rayan-refoua for boot animation
    @TheMadScientist
    @afaneh92
    @kdrag0n for safetynet fix

    3arthur6 for bluetooth patch zip
    @JDBarlow for test S20 stuff