[N20 Ultra SM-N986U/U1/W_Snapdragon]-[Upgrade Easily Firmware Using Odin]-[Automatically Root Remove Forceencrypt Patch Bluetooth And Fix Safetynet]

Search This thread

jrkruse

Recognized Contributor
Aug 9, 2009
8,163
12,387
Must Have An Unlocked Bootloader To Do This!

This An odin tar file I have created to flash along with stock odin firmware to automatically install TWRP recovery along with Disable VBMETA image. The tar file will also automatically install magislk root along with remove force encryption and patch bluetooth library file. It will also patch safetynet. No flashing of zips is required

Info For Bootloader Unlocks Can Be Found In Post 2

I Do Not Recommend Mixing Bit 1 And Bit 2 Firmware!!!!

Downloads
SM-N986U/U1/W- Model

These do not contains bootloaders from One UI 3.0 firmware and you will loose token if you flash higher version bootloaders unless you alter the firmware. You can use these to do the firmware as you see fit.
USERDATA_AIO_N986_FORCE_WIPE_NO_BL.tar.md5 --Use on android 10 or 11
This will force a wipe of data no mater what. This Must Be Used On U1 Firmware and can be used on U firmware if you choose so.

USERDATA_AIO_N986_NO_WIPE_NO_BL.tar.md5 --Use on android 10 or 11
This will only wipe if you have encrypted data. This Can Only Be Used On U firmware


Odin3_v3.14.1_3B_PatcheD.zip

Note 20 SM-N981U/U1

TWRP Recovery Provide by @afaneh92

Be prepared to have your data wiped. The process tries to determine if you do or do not need to have data wipe but as a precaution just assume your data will be wiped. Especially if using U1 or W firmware

Install Instructions For Newly Unlocked Devices

You must be OEM Unlocked Bootloader
1. On Initial unlock of phone you must through setup and be signed into your google account.

2. Reboot phone too download mode and make sure KG STATUS=CHECKING (see pic) and not PRENORMAL. If PRENORMAL then do step 1 again

View attachment 5217631

3. Use patched 3.14 odin and load file USERDATA_SLOT_N98*U_**.tar.md5 you must choose one of the FORCE_WIPE files and load in the USERSDATA slot of odin and flash file

4. Phone will reboot to TWRP and remove encryption which will wipe phone. Phone will reboot back too TWRP to finish install then reboot to setup



Install Instructions For Updating Firmware On Phone Already Unlocked

1. Reboot phone too download mode and make sure KG STATUS=CHECKING. If not see above

2. Use patched 3.14 odin and load stock firmware in appropriate slots use regular CSC file in the CSC slot and load file one of the USERDATA_SLOT_N98*U_**.tar.md5 in the USERSDATA slot of odin and flash firmware. Do not use the User Data file that comes with firmware.

3. Phone will reboot to TWRP and check for encryption and remove if needed which will wipe phone. If phone is not encrypted data will not be wiped. Phone will reboot back too TWRP to finish install then reboot to setup if data was wiped or reboot normally if it was not



Install Instructions If Updating Images With TWRP

1. When done flashing images in TWRP Reboot phone too download mode and make sure KG STATUS=CHECKING. If not see above.

2. Use patched 3.14 odin and load file USERDATA_AIO_N98*_NO_WIPE_NO_BL.tar.md5 in the USERSDATA slot of odin and flash file.

3. Phone will reboot to TWRP and check for encryption and remove if needed which will wipe phone. If phone is not encrypted data will not be wiped. Phone will reboot back too TWRP to finish install then reboot to setup if data was wiped or reboot normally if it was not.

4. Alternatively to using USERDATA_AIO_G98*_NO_WIPE_NO_BL.tar.md5 in odin you can use AIO_Magisk_22_S20_Series.zip found in post 2



Features
No patches or mod zips are needed phone will already be rooted

Fix Safetynet
Bluetooth is patched for pairing to survive reboots

Samsung Health working


Bugs
Samsung Pay, Secure Folder and Samsung Pass do not work as on most Samsung Rooted Roms


Thanks To People That Make My Life Easier
@elliwigy

@klabit87
@Krog18
@me2151
@stang5litre
@Raymonf for modified odin
@rayan-refoua for boot animation
@TheMadScientist
@afaneh92
@kdrag0n for safetynet fix

3arthur6 for bluetooth patch zip
@JDBarlow for test S20 stuff
 
Last edited:

jrkruse

Recognized Contributor
Aug 9, 2009
8,163
12,387
This is the zip that does the same thing as above odin file does. You can use this if you are updating images via flashing them in TWRP instead of using odin and wish to use the AIO zip instead of using odin

Downloads
Coming Soon!!



Info For Bootloader Unlocks Can Be Found

Another Thread For Bootloader Unlocks Can Be Found
 

domhall012N8

Senior Member
Mar 15, 2018
119
32
Patience is a virtue!!! Been trying to get all this right in my mind before using my 3.0 BL UL Token...

WOW!!! Android v3.1 system... With v3.0 UL BL... And Magisk Root without all the worries!?!?

THANKS A MILLION!!! How do you guys all find the damn time to do this for us all?!?!?

THANK YOU SO VERY MUCH for getting and keeping this device going... IN SPITE OF Samsung's crap!!!

Now all we gotta do is get our Xposed tid bits in order... This is FANTASTIC!!!
 
Last edited:

BiscoGuy

Member
Dec 18, 2014
6
12
Can I just say, before I even install this, how fantastically awesome it was to see jkruses profile photo when I checked the boards today! It's been since the s7 since I've had the pleasure. F-in A!
 

domhall012N8

Senior Member
Mar 15, 2018
119
32
OP... I unlocked BL yesterday and did a fresh set-up with your USERDATA_AIO_N986_FORCE_WIPE.tar.md5 for my N20U1... SWEET having everything loaded for us all at once!!!

This morning, after setup and restoring files from Samsung SD (Smart Switch), I attempted to TWRP back-up but got an error each time and no back-up... Has anyone else here gotten errors with TWRP back-up after flash and setup???

Update: Looks like I can back-up Data and Super... Fine enough for right now I guess... I also have TWRP logs as well...
 
Last edited:

IFireflyl

Senior Member
Feb 23, 2009
147
18
Springfield
This is failing in ODIN with the following details:

<snip>

This is with the N986U1, and using the USERDATA_AIO_N986_FORCE_WIPE.tar file.


Scratch that. Apparently it was an issue with my USB port. I changed to a different port and was able to flash this. Thanks!
 
Last edited:

cerj

Recognized Themer
Nov 1, 2012
6,260
12,071
NOLA
Just wanted to say thank you again and again. Just used your AIO for the first time. I used the first link with 3.0 bootloader for U1, and it worked perfect for flashing from 3.0 U1 XAA fw to an updated 3.0 fw for U TMB. Amazing work jrkruse
 
need any help getting oneui3.1 working? ive noticed some things no longer work like long press power for torch

Its on the side slide panel click on settings add a second panel
 

Attachments

  • Screenshot_20210309-050633_Lawnchair.jpg
    Screenshot_20210309-050633_Lawnchair.jpg
    147.8 KB · Views: 107

Top Liked Posts

  • There are no posts matching your filters.
  • 7
    Must Have An Unlocked Bootloader To Do This!

    This An odin tar file I have created to flash along with stock odin firmware to automatically install TWRP recovery along with Disable VBMETA image. The tar file will also automatically install magislk root along with remove force encryption and patch bluetooth library file. It will also patch safetynet. No flashing of zips is required

    Info For Bootloader Unlocks Can Be Found In Post 2

    I Do Not Recommend Mixing Bit 1 And Bit 2 Firmware!!!!

    Downloads
    SM-N986U/U1/W- Model

    These do not contains bootloaders from One UI 3.0 firmware and you will loose token if you flash higher version bootloaders unless you alter the firmware. You can use these to do the firmware as you see fit.
    USERDATA_AIO_N986_FORCE_WIPE_NO_BL.tar.md5 --Use on android 10 or 11
    This will force a wipe of data no mater what. This Must Be Used On U1 Firmware and can be used on U firmware if you choose so.

    USERDATA_AIO_N986_NO_WIPE_NO_BL.tar.md5 --Use on android 10 or 11
    This will only wipe if you have encrypted data. This Can Only Be Used On U firmware


    Odin3_v3.14.1_3B_PatcheD.zip

    Note 20 SM-N981U/U1

    TWRP Recovery Provide by @afaneh92

    Be prepared to have your data wiped. The process tries to determine if you do or do not need to have data wipe but as a precaution just assume your data will be wiped. Especially if using U1 or W firmware

    Install Instructions For Newly Unlocked Devices

    You must be OEM Unlocked Bootloader
    1. On Initial unlock of phone you must through setup and be signed into your google account.

    2. Reboot phone too download mode and make sure KG STATUS=CHECKING (see pic) and not PRENORMAL. If PRENORMAL then do step 1 again

    View attachment 5217631

    3. Use patched 3.14 odin and load file USERDATA_SLOT_N98*U_**.tar.md5 you must choose one of the FORCE_WIPE files and load in the USERSDATA slot of odin and flash file

    4. Phone will reboot to TWRP and remove encryption which will wipe phone. Phone will reboot back too TWRP to finish install then reboot to setup



    Install Instructions For Updating Firmware On Phone Already Unlocked

    1. Reboot phone too download mode and make sure KG STATUS=CHECKING. If not see above

    2. Use patched 3.14 odin and load stock firmware in appropriate slots use regular CSC file in the CSC slot and load file one of the USERDATA_SLOT_N98*U_**.tar.md5 in the USERSDATA slot of odin and flash firmware. Do not use the User Data file that comes with firmware.

    3. Phone will reboot to TWRP and check for encryption and remove if needed which will wipe phone. If phone is not encrypted data will not be wiped. Phone will reboot back too TWRP to finish install then reboot to setup if data was wiped or reboot normally if it was not



    Install Instructions If Updating Images With TWRP

    1. When done flashing images in TWRP Reboot phone too download mode and make sure KG STATUS=CHECKING. If not see above.

    2. Use patched 3.14 odin and load file USERDATA_AIO_N98*_NO_WIPE_NO_BL.tar.md5 in the USERSDATA slot of odin and flash file.

    3. Phone will reboot to TWRP and check for encryption and remove if needed which will wipe phone. If phone is not encrypted data will not be wiped. Phone will reboot back too TWRP to finish install then reboot to setup if data was wiped or reboot normally if it was not.

    4. Alternatively to using USERDATA_AIO_G98*_NO_WIPE_NO_BL.tar.md5 in odin you can use AIO_Magisk_22_S20_Series.zip found in post 2



    Features
    No patches or mod zips are needed phone will already be rooted

    Fix Safetynet
    Bluetooth is patched for pairing to survive reboots

    Samsung Health working


    Bugs
    Samsung Pay, Secure Folder and Samsung Pass do not work as on most Samsung Rooted Roms


    Thanks To People That Make My Life Easier
    @elliwigy

    @klabit87
    @Krog18
    @me2151
    @stang5litre
    @Raymonf for modified odin
    @rayan-refoua for boot animation
    @TheMadScientist
    @afaneh92
    @kdrag0n for safetynet fix

    3arthur6 for bluetooth patch zip
    @JDBarlow for test S20 stuff
    3
    This is the zip that does the same thing as above odin file does. You can use this if you are updating images via flashing them in TWRP instead of using odin and wish to use the AIO zip instead of using odin

    Downloads
    Coming Soon!!



    Info For Bootloader Unlocks Can Be Found

    Another Thread For Bootloader Unlocks Can Be Found
    1
    Yes you can flash AIO alone, or with a ROM in Odin.
    got it,. something was wrong with the file or something, moved to a diff drive
    1
    Make sure Re-Partiton is unchecked on the options tab before you flash. Regarding 3.1, I recommend you use SacROM or a (bit 1) stock ROM until a solution is found to keep BL unlock on bit 2 firmware.
    Im running bit 2 with unlocked bootloader. I just posted it a couple a couple comments back.

    https://forum.xda-developers.com/t/...tooth-and-fix-safetynet.4240803/post-84779273
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone