• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

N8010 stuck in boot loop displaying Samsung GALAXY Note 10.1

Search This thread

niloc32

New member
Sep 8, 2017
1
0
Hello,
My tablet was working fine, but the other day when I turned it on this happens. I can at least turn it off when connected to the charger.

It will not boot into recovery. I just get the android on his back with red triangle and No Command.

I can boot into Odin download. So I am trying to install CF-Auto-Root as a precursor to installing CWM Recovery to see if I can boot into that recovery. I have downloaded and installed Odin, and downloaded N8010 version of CF-Auto-Root (CF-Auto-Root-p4notewifiww-p4notewifixx-gtn8010).

Using Odin to install this .tar file seems to work (I get Pass), but auto reboot, or manual reboot into recovery is still the same. Isn't booting into CF-Auto-Root. This is the Odin log;
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-p4notewifiww-p4notewifixx-gtn8010.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)

Is it supposed to look like this?

Any ideas what I may be doing wrong, or anything I can try?

Thank you.
 

miguelcnc

New member
Sep 18, 2011
3
0
Hello,
My tablet was working fine, but the other day when I turned it on this happens. I can at least turn it off when connected to the charger.

It will not boot into recovery. I just get the android on his back with red triangle and No Command.

I can boot into Odin download. So I am trying to install CF-Auto-Root as a precursor to installing CWM Recovery to see if I can boot into that recovery. I have downloaded and installed Odin, and downloaded N8010 version of CF-Auto-Root (CF-Auto-Root-p4notewifiww-p4notewifixx-gtn8010).

Using Odin to install this .tar file seems to work (I get Pass), but auto reboot, or manual reboot into recovery is still the same. Isn't booting into CF-Auto-Root. This is the Odin log;
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-p4notewifiww-p4notewifixx-gtn8010.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)

Is it supposed to look like this?

Any ideas what I may be doing wrong, or anything I can try?

Thank you.
i have same problem with an italian gt-n8010 -.... finally you find fix ???
 

JJEgan

Senior Member
Oct 24, 2010
30,293
5,889
That post was four years ago , poster not seen since .
Usual is search answers well posted , depends upon exact error message .