Need A Bootable CWM v6 SD Card.....

[smokarz]

Guys, my NT is rooted.

Now I need to make a bootable SD card with CWM v6 to flash CM10 ROM.

What's an easy way to do this?

Thanks

 

[digixmax]

Use CM9-10_CWM_v6.0.1.2_8-16gb_tools_sdcard.zip from here.

 

[smokarz]

Use CM9-10_CWM_v6.0.1.2_8-16gb_tools_sdcard.zip from here.

I saw that thread, but a little confused how to follow the directions in there.

 

[smokarz]

Any other simpler way to make a CWM v6 bootable SD card?

 

[BoostedB18C]

Any other simpler way to make a CWM v6 bootable SD card?

Its not that difficult. Directions are provided, just follow them

Sent from my NT running Kuzma's CM10.1

 

[fljoe]

Any other simpler way to make a CWM v6 bootable SD card?

This is the easiest way I found:

1) Download 3 files listed below here: (http://four-nineteen.com/veronica/XDA Developers/Nook Tablet/RECOVERIES/)
a) MLO_u-boot_flashing-boot.rar,
b) CM9-10_CWM_V6.0.1.2_8-16gb_tools_sdcard.zip,
c) CM9-10_TWRP_v2.2.2.0_8-16gb_tools_sdcard.zip

2) Unzip all the above 3 files
3) Rename the CWM file to recovery.img
4) Rename the TWRP file to altboot.img
5) Copy recovery.img and altboot.img and MLO, flashing_boot.img and u-boot.bin to the root of the external SDCard.
6) Download MiniTool Partition Wizard from here: http://www.partitionwizard.com/free-partition-manager.html
7) Open up MiniTool Partition Wizard and look for your external SDCard
8) Make sure that your boot partition is Primary FAT32 (type 0x0C) with LBA
9) Make this partition Active (MiniTool: Right-click on Partition -> Modify -> Set Active, click Apply )
10) Make sure your Nook Tablet is turned OFF completely. I confirm this by pressing the "n" button and verify screen is blank
11) Insert the SDCard into the Nook Tablet
12) Connect a powered-USB cable (USB cable connected to power adapter) to the Nook Tablet, press the Power button on the Nook tablet, and the Nook Tablet will boot up after a few seconds (assuming that the SD is bootable).
13) Once CyanoBoot comes up, hold the "N" button to get the boot menu from which you can select one of the two recovery programs.

Credit goes to digixmax who helped me out with this procedure!

 

[nashdude]

Use CM9-10_CWM_v6.0.1.2_8-16gb_tools_sdcard.zip from here.

Yep smokarz, this is the SD that I used.

 

[lost101]

If you have cwm5 installed, or have it on an sd card; flash this: CWM_v6.0.1.5_emmc

Then from cyanoboot, hold 'n' and choose 'Internal eMMc Recovery.'

Alternatively, I would assume the twrp sd card would allow you to install cm10.

 

[KeoQue]

I have done like this topic. But my nook stuck at the screen with a catton box.

Sent from my HTC One XL using xda premium

 

[digixmax]

I have done like this topic. But my nook stuck at the screen with a catton box.
...

Try downloading the copy cwm_6012_sd.img from http://goo.im/devs/meghd00t/cwm6, rename it to recovery.img and copy it to your SD card (together with MLO, u-boot.bin, and flashing_boot.img from the pointer above).

 

[BadKid3011]

Try downloading the copy cwm_6012_sd.img from http://goo.im/devs/meghd00t/cwm6, rename it to recovery.img and copy it to your SD card (together with MLO, u-boot.bin, and flashing_boot.img from the pointer above).

i tried but my screen still stuck with the catton box

 

[MrIssy]

Same issue

i tried but my screen still stuck with the catton box

I have the same issue... I have tried this method, as well as the Goo method to boot CWM 6 (on a Team B CM7 NT -- no cyanoboot).

Neither one works.... they both hang going into recovery.

I hope we don't have to go back to stock Nook to get to CM10 from Team B CM7.

Issy

 

[digixmax]

Try steps 1 and 2 (a+b) of the method described at http://forum.xda-developers.com/showpost.php?p=35669871&postcount=1.

 

[satan89]

Try downloading the copy cwm_6012_sd.img from http://goo.im/devs/meghd00t/cwm6, rename it to recovery.img and copy it to your SD card (together with MLO, u-boot.bin, and flashing_boot.img from the pointer above).

Everybody try this but rename the file to boot.img instead of recovery.img. copy all other files as well

Hit Thanks if I helped you!