Need help in flashing stock rom on Razer Phone 2 ! (Stuck in Bootloop)

[Paradox.7777]

Hello Everyone , I have ran into a very bad problem and would appreciate some help. I tried rooting my phone (Razer Phone 2 Atnt varient) with the following method (https://forum.xda-developers.com/razer-phone-2/development/root-pie-update-unlocked-devices-t3905454) after doing so my phone got stuck in bootloop. Therefore, I thought it would be best to unroot the phone (or at least flash the original rom) . So , I tried doing that with the following method (https://forum.xda-developers.com/razer-phone-2/how-to/razer-phone-2-unroot-step-step-t3896529) but that did not solve anything . It still remains stuck on the (Razer logo , Powered by Android) . However, I can still access adb and use fastboot as well. Any quick help would be greatly appreciated . I really can't afford loosing a phone so close to holidays.

 

[JDBarlow]

Have you read through this whole page yet?

You can flash via fastboot very simply by double clicking the flash_all.bat after extracting the image. Good luck!

https://developer.razer.com/razer-phone-dev-tools/general-instructions/

 

[Paradox.7777]

Hey , thanks for reaching out. I already tried doing the flash all script method through adb. Yet I am still stuck on bootloop. I am really confused.

 

[Paradox.7777]

I can. However, still access fastboot mode. I don't know what I am doing wrong. I should also mention that my bootloader is unlocked. Any further help would be greatly appreciated.

 

[keaheng]

I can. However, still access fastboot mode. I don't know what I am doing wrong. I should also mention that my bootloader is unlocked. Any further help would be greatly appreciated.

Check your USB port. It might not recognize the device

 

[Straum]

I'm also having this issue where I have clicked flash all and it either gets stuck on the razer logo or tells me the phone is corrupt and when I hit the power button it just bootloops. I know the port is fine, I have flashed phhusson's Android 10 GSI successfully, but I wanted to change something and it seems that I cannot go back to stock without getting a bootloop.

---------- Post added at 05:55 PM ---------- Previous post was at 05:30 PM ----------

I think I might have solved the issue! In the flash all batch file it flashes two different system images, system.img to partition a and system_other.img to partition b. I edited the flash all file to flash system.img to both partitions cause my phone seems to use partition b instead of a as it's operating partition and it no longer bootloops and in fact has booted to stock! You can give that a try.

 

[phuongusn]

Did you flash back to the stick boot image? If not do that first than flash your stock image. If you are still in a boot loop try flashing the old MR0 image to get out of the boot loop. If it works flash the newly released MR2 after.