New Dasaita (hotaudio) Android 6.0.1 ready , PX5 Platform Octa-Core 32GB 2G RAM :D

[hessen@]

I have HA2015-V600
I can update it?
Hotaudio UI HA_PX5_8.0_ota(20180305） https://www.sendspace.com/pro/dl/v7cuby
Thanks for the answer.

 

[ziomorgan]

hello I have a v600 with three usb but there is no sd gps that is used for the update which I can use?

 

[djtriso]

I have dasaita v600 three usb ,how update to android 8

 

[radoslavsto]

Hi
I have XTRONS PB76FSFAP units MTCE GS RK 3368 PX5 (2GB + 32GB).
I'd buy Witson PX5 Octa Core + 4GB Ram + 32GB Rom Coreboard.
1. Will it work on my device?
2. What firmware install Witson or XTRONS (DMCU and update)?
Radoslav

 

[ikerg]

Hi
I have XTRONS PB76FSFAP units MTCE GS RK 3368 PX5 (2GB + 32GB).
I'd buy Witson PX5 Octa Core + 4GB Ram + 32GB Rom Coreboard.
1. Will it work on my device?
2. What firmware install Witson or XTRONS (DMCU and update)?
Radoslav

Offtopic

Enviado desde mi SM-G950F mediante Tapatalk

 

[typos1]

hello I have a v600 with three usb but there is no sd gps that is used for the update which I can use?

To identify your unit we need the MCU and processor.

I have dasaita v600 three usb ,how update to android 8

What processor do you have ?

 

[ziomorgan]

Rockchip PX5 A53 Octa-Core
mcu ha

 

[typos1]

Rockchip PX5 A53 Octa-Core
mcu ha

If youre just updating MM then you can use USB, you ll have to go into recovery manually and flash from there.

 

[djtriso]

px5 octacore

 

[floretto]

Hello everyone y have a KGL MTCB RK3188 1024x600 unit - if it were possible to buy new board, would the PX5 board.seller alliexpress.please

Enviado desde mi SM-N950F mediante Tapatalk

 

[ikerg]

Hello everyone y have a KGL MTCB RK3188 1024x600 unit - if it were possible to buy new board, would the PX5 board.seller alliexpress.please

Enviado desde mi SM-N950F mediante Tapatalk

I don't think that could be compatible with MTCB units...
We do know that px5 is based on MTCD board

Enviado desde mi SM-G950F mediante Tapatalk

 

[IgMan98]

Volume BT in the factory setting was adjusted to maximum of 20, unfortunately they cannot hear me well. There are two microphones, inner of head unit and external.
What kind of BT model should I choose in the factory setting?

 

[typos1]

Volume BT in the factory setting was adjusted to maximum of 20, unfortunately they cannot hear me well. There are two microphones, inner of head unit and external.
What kind of BT model should I choose in the factory setting?

If you dont know what module you have you ll have to try them all.

If you have 2 mics, then you should block the hole for the internal one.

 

[димон1975]

Good day,I have dasaita HA2153-v600 ,BT installed from factory SD968 is a problem when talking on the phone,want to change to a different brand of BT.Bought new BT modules on aliexpress BC6 and BC8, which would you recommend to install ?

 

[marchnz]

Good day,I have dasaita HA2153-v600 ,BT installed from factory SD968 is a problem when talking on the phone,want to change to a different brand of BT.Bought new BT modules on aliexpress BC6 and BC8, which would you recommend to install ?

Good question, would think the Md725, however appears crippled by drivers/library. SD968 I had thought to be OK, BC6 and BC8 are dated.

 

[димон1975]

so which of these modules sd968, bç6, bc8 works qualitatively

 

[typos1]

Good day,I have dasaita HA2153-v600 ,BT installed from factory SD968 is a problem when talking on the phone,want to change to a different brand of BT.Bought new BT modules on aliexpress BC6 and BC8, which would you recommend to install ?

What is the actual prblem with the S968 ?

Good question, would think the Md725, however appears crippled by drivers/library. SD968 I had thought to be OK, BC6 and BC8 are dated.

Some people do report problems with the S968.

 

[димон1975]

during the razgovra on the phone via BT sometimes goes a distortion of the sound and the conversation is quiet on the other side and as in a tunnel or a large empty room

 

[typos1]

during the razgovra on the phone via BT sometimes goes a distortion of the sound and the conversation is quiet on the other side and as in a tunnel or a large empty room

Yes I ve heard of something similar before.

 

[marchnz]

Yes I ve heard of something similar before.

Sounds like all BT type are poor. Md725 and sd968 are BT4, not that the supporting binaries/drivers implement anything of quality.