does any1 has the issue that the power-management is not showing the right standby time, since my full recharge at 100% it is showing 8hours only, cant think that is possible.
Only Telekom and o2. No Update for Vodafone (and probably Eplus) Firmware yetGermany Status:
Branded Phones got 10.1.1.A.1.253 (Providers got the update from Sony early)
Unbrandet Phones are still @ 10.1.A.1.434, Sony shows that version on theyr Website as "up to date" for Germany
Thanks for your method, it is working, now I am root and re-gain back BE2 & DRM.You need to backup TA before unlocking BL for the 1st time.
1. Root is required on the current device, 434ver, terminal emulator too.
2. In terminal type SU, grant access in the popup window.
3. Type dd if=/dev/block/mmcblk0p1 of=/sdcard/ta-backup.img
"Backup: dd if=/dev/block/mmcblk0p1 of=/sdcard/ta-backup.img"
"Restore: dd if=/sdcard/ta-backup.img of=/dev/block/mmcblk0p1 "
4. Copy ta-backup.img on the computer too (please check MD5, i never did this but it's important)
5. Flashtool: flash new ROM (i didn't turned on my phone after this but it doesn't matter)
6. Unlock BL with FlashTOOL
7. Flash AdvancedStockKernel (i've used the one provided in link even if it was for 434)
8. TurnOn the phone, press vol- until CWM will pop.
9. Flash SU.zip
10. Open FlashTool again, select the new rom but uncheck everything except KERNEL
11. On your phone you have the option to reboot system (CWM menu), do it and press V-
12. Flashtool will start flashing the kernel
13. Start the phone, open terminal and use restore ta in terminal:
dd if=/sdcard/ta-backup.img of=/dev/block/mmcblk0p1
You will have the new room with root and BL locked again, BE&DRM intact.
Hmm... I also facing the auto reboot issue.I've used SuperUser.zip and CWM not TRWP.
After booting up i've installed SuperSU and uninstalled SuperUSER.
I got 3 or 4 reboots when trying to uninstall some bloatware like sonyselect but after that everything is running fine.
Same issue here, mate.Hi All,
Is there a fix about my phone not being able to detect the new update? This is for both phone and PC companion. I am from Manila and some of my friends already got the update![]()
Yes mate, you will loose root and pureXaudio and every app/setting you've got.I am in the same situation. Have rooted the phone + pureaudio mod. Will I loose all of that after upgrading by Non-OTA method? I really need this phone to remain rooted because of the nature of the apps I use. If the only way is to wait for the OTA update, I will - just wanted to know what's the deal...
Settings / Apps / AllCould one please advise on how to rectify the problem of the power-management showing incorrect standby time it's stuck at 8hours
Sent from my C6602 using xda premium
Uploading version 3, flashable zip, pre-rootedWell, then I have to wit for the OTA I guess. I really need to have rooted phone, so I guess it's just a matter of time to find another method for rooting the phone. However I'm still conused - will be there OTA update, or this will be update trough PCC only?
Been searching high and low for the proper "superuser".zip file.. Where did you get the correct one to flash from CWM?You need to backup TA before unlocking BL for the 1st time.
1. Root is required on the current device, 434ver, terminal emulator too.
2. In terminal type SU, grant access in the popup window.
3. Type dd if=/dev/block/mmcblk0p1 of=/sdcard/ta-backup.img
"Backup: dd if=/dev/block/mmcblk0p1 of=/sdcard/ta-backup.img"
"Restore: dd if=/sdcard/ta-backup.img of=/dev/block/mmcblk0p1 "
4. Copy ta-backup.img on the computer too (please check MD5, i never did this but it's important)
5. Flashtool: flash new ROM (i didn't turned on my phone after this but it doesn't matter)
6. Unlock BL with FlashTOOL
7. Flash AdvancedStockKernel (i've used the one provided in link even if it was for 434)
8. TurnOn the phone, press vol- until CWM will pop.
9. Flash SU.zip
10. Open FlashTool again, select the new rom but uncheck everything except KERNEL
11. On your phone you have the option to reboot system (CWM menu), do it and press V-
12. Flashtool will start flashing the kernel
13. Start the phone, open terminal and use restore ta in terminal:
dd if=/sdcard/ta-backup.img of=/dev/block/mmcblk0p1
You will have the new room with root and BL locked again, BE&DRM intact.
Wait for few cycles to stabilise battery. You can't judge battery life with one charge.It doesn't improve batterylife. It improves the screen, alot. And led is working with stamina.