[New] Minix NEO U1 TV BOX Android 5.1 Lollipop Amlogic S905 2G/16G

Search This thread

o-I-c

Senior Member
Sep 6, 2013
299
61
Around Town
MINIX NEO U1 4K*2K UHD TV BOX Android 5.1 Lollipop Amlogic S905 2G/16G 2x2 MIMO 802.11ac WIFI Bluetooth 4.1 1000M LAN:


Powered Amlogic Quad-core 64 bit Cortex A53 S905 CPU, Penta-Core Mali-450 GPU
Built-in Samsung 2GB of DDR3 memory, along with 8GB of Samsung eMMC 5.0 flash storage
Support 802.11ac 2 x 2 MIMO Dual-Bnad Wi-Fi(2.4GHz/5.0GHz), Bluetooth 4.1
Comes with 3 USB port, Optical SPDIF port and Gigabit Ethernet
Running Android Lollipop 5.1.1
Support 4K2K UHD Video Playback, HDMI 2.0
Support 4K HEVC Hardware Decoding, Up to 10bit, [email protected]
HDMI 2.0, up to [email protected], support HDMI-CEC

1i2a2u.jpg


Model Minix Neo U1
Operating System Android Lollipop 5.1.1
CPU Amlogic S905,Quad-core 64-bit ARM® Cortex™-A53
GPU Penta-Core ARM® Mali™-450
RAM 2GB DDR3
ROM 16GB eMMC 5.0 Storage
Wifi Connectivity 802.11ac 2 x 2 MIMO Dual-Band Wi-Fi(2.4GHz/5.0GHz)
Ethernet 1000Mbps
Bluetooth Bluetooth 4.1
Video Supported DAT/MPEG/MPE/MPG/TS/TP/VOB/ISO/AVI/MP4/MOV/3GP/FLV/MKV/M2TS/MTS/M4V/WMV/ASF
Audio Supported MP2/MP3/WMA/WAV/OGG/OGA/FLAC/ALAC/APE/AAC
Picture Supported JPEG/BMP/GIF/PNG/TIFF,etc.
HDMI Port HDMI™2.0,up to 4K @60Hz,Supports HDMI-CEC
Other Interfaces
3*Standard USB 2.0
1*OTG port
1*Standard HDMI™ 2.0 Output
1*TF Card Slot
1*Headphone
1*Microphone
1*SPDIF
1*LAN interface(1000Mbps)
1*DC-IN
Power 5V 3A(CE,FCC certified)
Package Contents
1 x TV box
1 x IR remote
1 x HDMI cable
1 x OTG cable
1 x USB to USB cable
1 x Power adapter (A right AC Adapter will be sent as your shipping country)
1 x User manual

10ztuzc.jpg

16kn79h.jpg

1414p3m.jpg

jtxkxc.jpg
 
Last edited:

capfelix

Senior Member
May 1, 2006
78
2
Android TV platform support

Does the U1 able to run Android TV platform? Will it be supported by Minix (installation of Android TV)?
 

Tabs78

Senior Member
Dec 8, 2007
650
25
hi
i have a netgear dgn2200 v3

my problem is:
when i set router mode to 300mbit minix doesn't see wifi or see it forsome second and after lost it
when i set routermode to 145mbt is all ok

it is not a problem of key because i tried all mode


the link above tell:

- The DGN2200(B)v3 supports full 2.4 GHZ configuration including 802.11n, 802.11g, and 802.11b
- The default wireless mode for the firmware is "Up to 145Mbps" at 2.4GHZ "Up to 54Mbps" supports the 802.11g & 802.11b standards. "Up to 145Mbps" and "Up to 300Mbps" modes support the 802.11N specification and use 20MHz and 40MHz bandwidths, respectively. "Up to 300Mbps" will provide the maximum performance in most cases, "Up to 145Mbps" may work better in areas with more interference from other access points



Other question: can someone post the miracast apk?

thankyou
 

spidertop

Senior Member
Jul 29, 2008
134
9
Try to change wifi name, giving a different names for 2.4Gz and 5Ghz networks.
By this whay you are sure which wifi network are connecting to.