[New] MXIII-G REVIEW
- Thread starter blinkone
- Start date
USB power when off
Hi guys,
Does anyone know if it is possible to stop the device from powering the USB port when I turn it off?
I have a USB hard disk connected and I'm 99% sure that it never powers down. It does so, only if I unplug the MX, which of course is not a solution..
Thanks
Hi guys,
Does anyone know if it is possible to stop the device from powering the USB port when I turn it off?
I have a USB hard disk connected and I'm 99% sure that it never powers down. It does so, only if I unplug the MX, which of course is not a solution..
Thanks
The device doesn't actually power of at all I think, it just turns the screen off. I have it playing tune in radio over Bluetooth and it just keeps on going even if I switch the box off and the light goes red.
This looks like the same box but with an 802 instead of an 812: http://www.amazon.com/Amlogic-Cortex-Android-Google-Vensmile/dp/B00Q8DB4YY
Anyone tried to flash lollipop from this thread to the above box?
Thanks
Anyone tried to flash lollipop from this thread to the above box?
Thanks
Does anyone know why kodi is showing only 1 or 2 cores working in system info? And once again error in recovery "E:cannot load volume/misc!" is normal for this kind of boxes or? Cuz the box is working very vell, im just asking... Kodi is showing cache is full from time to time but i always clear it in kodi, not for all addons.
Cheers
Cheers
use es file explorer and delete all roots of kodi and reinstall the app again
Sent from my Redmi Note 2 using XDA-Developers mobile app
i have 108l with xposed installed and work fine
does someone install 201l to mxiii-g ?
Last edited:
I've also, got one of these running the 5.1, since today though on the right side of the screen I have what looks like an envelope icon in a circle, all my Gmail sync is off apart from app data, it can't be clicked on, can't seem to get rid, any help appreciated please.
I've already tried all that, install, reinstall, delete.. Kodi system info shows 2cores running, and cache full (not always) , maybe it's only showing active cores not standby or it's bug.. And error in recovery cannot load misc? How to get rid, somebody says its normal
Cheers
hi, how to install xposed?
---------- Post added at 09:34 PM ---------- Previous post was at 09:31 PM ----------
Hello, which guides you followed to install Xposed framework?
Or you could give me a few lines to install Xposed framework?
Thank you.
---------- Post added at 09:34 PM ---------- Previous post was at 09:31 PM ----------
Hello, which guides you followed to install Xposed framework?
Or you could give me a few lines to install Xposed framework?
Thank you.
TWRP Recovery v3 for the MXIII-C n200c
http://www.freak-tab.de/abdul_pt/aml/TW3_KII.img
Working great.
(may work on the MXIII-G)
http://www.freak-tab.de/abdul_pt/aml/TW3_KII.img
Working great.
(may work on the MXIII-G)
The easiest way to install xposed
To install Xposed your don't need any custom recovery installed. Just follow the next steps and make sure you have root enabled. I tried this by myself and it's working fine. I'm using lollipop (5.1.1)
1. Download Xposed framework (xposed-v74-sdk22-arm.zip)
from:
http://xdaforums.com/showthread.php?t=3034811
If using lollipop choose: sdk22/ arm/ xposed-v74-sdk22-arm.zip
2. Download official Xposed installer (XposedInstaller_3.0_alpha4.apk) (APK ONLY!) from:
http://xdaforums.com/showthread.php?t=3034811
3. Install FlashFire from the Google Play Store
4. Flash Xposed framework using FlashFire. (Just use the flash .zip option. Do not check any of the boxes) (This will take a few minutes, your android tv box will reboot and will update installed apps.
5. Install official Xposed installer APK
6. You have Xposed! Enjoy!
To install Xposed your don't need any custom recovery installed. Just follow the next steps and make sure you have root enabled. I tried this by myself and it's working fine. I'm using lollipop (5.1.1)
1. Download Xposed framework (xposed-v74-sdk22-arm.zip)
from:
http://xdaforums.com/showthread.php?t=3034811
If using lollipop choose: sdk22/ arm/ xposed-v74-sdk22-arm.zip
2. Download official Xposed installer (XposedInstaller_3.0_alpha4.apk) (APK ONLY!) from:
http://xdaforums.com/showthread.php?t=3034811
3. Install FlashFire from the Google Play Store
4. Flash Xposed framework using FlashFire. (Just use the flash .zip option. Do not check any of the boxes) (This will take a few minutes, your android tv box will reboot and will update installed apps.
5. Install official Xposed installer APK
6. You have Xposed! Enjoy!
Hello,
i have Mxiii-g 2g/16g version
How to unbrick it ?
I've tried with USB_Burning_Tool .. it says succes, i unplug the device from otg, remove power, reinsert power and the REd is still on.. no Blue light... and no video signal at all..
I did something wrong?
any advice will gladly help!
Thanks.
i have Mxiii-g 2g/16g version
How to unbrick it ?
I've tried with USB_Burning_Tool .. it says succes, i unplug the device from otg, remove power, reinsert power and the REd is still on.. no Blue light... and no video signal at all..
I did something wrong?
any advice will gladly help!
Thanks.
Flash 104L1 from here with attached USB burning tool
https://drive.google.com/folderview?id=0B40FrT0E9vFZU1I3OHdlLXdpNzQ&usp=sharing
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
4Here's firmware 108L1 to install from SD card : https://drive.google.com/open?id=0B1ye8kfnRF3BUy1qQnFwUEh1SWs
Flash MXIII-G TV Box Steps:
1. Format one micro-sd card.
2. Download the firmware and unpack it, copy all file to micro-sd card.
3. Insert the micro-sd card to MXIII-G tv box.
4. Plug in the power supply.
5. Keep pressing the recover button (the button is inside the AV port) by a toothpick.
6. Turn on the power button and wait until the the Android robot appear on the TV screen, then release the toothpick.
7. Just wait until the Android TV Box reboot automatically. Done.4
Just for the record, the two I use are:
Gyroscope mini Fly Air Mouse T2 2.4GHz Wireless
and
G61A 2.4G Wireless Air Mouse Six-axis Intelligent Remote Controller for TV BOX
But, I do not think it matters much, they all work pretty similarly. I tried others as well, there is not much difference, even the ones that do not look ergonomic are small enough to fit in your palm, and to be used comfortably. Since these are radio devices, they do not have to be in the line of sight with the player. You have to get used to using it at first (it has a completely different feeling than the regular mouse), but after a day or two it becomes a natural extension of your arm.
I do not recommend small radio keyboards though, as I bought one too, tried it for two days, and have never really used it since then (not even once).
I do not have such symptoms, although the reason may be that I use the fiber optic cable to connect the box to my amplifier. Still, I use HDMI to connect to a TV, and have no such problems either, even if TV's volume is on.
Therefore, I cannot reproduce your problem, but you can fix the volume to the max position using Tasker (paid) or Llama (free) Android app. Depending on when exactly this noise happens, it can help or not.
It is explained in the post 44 in this thread (http://xdaforums.com/showpost.php?p=62619644&postcount=44)
Please note, that there are explanations in the remote.conf file, that can help you set up additional customizations.
IMPORTANT: If you edit any of these files (Vendor_0001_Product_0001.kl, remote.conf, keyboard.xml) you must update their access rights (R-W-X) to match the previous state, otherwise you will have problems with the remote.
I also used the Keymap add-on for Kodi to add and change some Kodi commands, but it would require the whole tutorial to explain in any detail.
You can experiment
4Hey guys,
I received this android box recently and also suffered the google play services error to the point I just downloaded the android kitkat stock rom in the original post and flashed that onto my tv box and it works fine and is stable! The download was painstakingly slow so I have taken the liberty of upload this to my pretty powerful dedicated server, which is on a gigabit port hosted in a datacentre so actual decent download speeds! I don't know how long I will host this for, but probably for the lifetime I have this server, seeing as it's not exactly a big file and I have plenty of bandwidth it won't even touch the server lol. As far as I know these ROM's are totally legal so it's all good! Feel free to add this to the original post :')
If you don't like direct links just head to:Code:http://www.jeromeosstuff.info/Download/TVBOX
Linky:Code:http://www.jeromeosstuff.info/Download/TVBOX/MXIII-G_316k4_sdcard.rar
And of course, if I put the first link up I may aswell put up the lollipop ones too so here you go :
Linky:Code:http://www.jeromeosstuff.info/Download/TVBOX/MXIII-G_101L1.img
Please thank me if you do use these!
Kind Regards,
haynes114
Hi Rick,
If you want to have the same buttons, you have to specify MBX as manufacturer and MXIII as device.
If you want more buttons, you have to specify PIVOS as manufacturer and XIOS DS as device, but you have to copy the attached remote.conf (inside the .rar file) in /system/etc/ (make a backup or rename the existing remote.conf) and reboot your box.3MXiii G
Sneak peek at BETA Android 5 Lollipop Rom
The rom flashing process went with out any problems very easy to do, it takes about 4/5 mins on first boot though
Home screen
Cpu z
Antutu
Antutu Video
The Rom is running very nice indeed iv not came across anything thats not working yet.
Its not rooted but easy to root with iroot
Nova Launcher working like a charm snappy as hell
More to come
