New Owner - Some Questions: Steering Wheel / Hardware Button remap / Navi volume

[noby95]

Hello everyone,

I received my device yesterday. And I have some problems I would like to fix. Maybe anyone can help me?

It is for Nissan Qashqai J11 and the Version Info says:
Model-Nr: S07
MCU-Version MTCB-KLD2-V2.77
Android-Version: 4.4.4_20082015
Kernel-Version: 3.0.36+ [email protected] #58
Build-Number: rk3188-eng4.4.4 20052015.17:14:44
Processor: ARM Cortex-A9 @ 1.6 GHZ (x4)

1. In the Settings Menu there's an option for Factory Settings, which needs a password. I read the password here, but my question is: When I enter the password will the device Factory reset or will there appear a menu with additional settings?
2. There is a settings menu to remap the steering wheel controls. But remapping the steering wheel controls doesn't work. Is this a known problem?
3. On the steering whell the controls for media next and media back are switched. Is there an easy way to fix it?
4. Is there a way to remap the hardware buttons on the device itself -> Like the Navi Button should not open Google Maps but should open nokia here.
5. As I am using the device mostly offline I will use noka here for navigation. Is there a way to make the volume of nokia here lounder than the volume of the music?
6. As the Kernel-Version says "root" in it. Am I already rooted?

Any help would be greatly appreciated!

Factory Settings code *#hct#root# for rooting
126 - factory settings menu

 

[Mr Bigglesworth]

Might be worth you watching some youtube videos so can see what to expect. To answer some of your questions:
- Factory settings password just takes you to some new menus.
- under Navi options I had the option to direct my Navi button to whatever navigation software I wanted to use. If you don't have this take a look at some of the mods on the Software forum as you can use those to do the same thing.
- under navi options I had the option to adjust the mixing volume or make audio cut to give you navi directions
- SWC, same for me but if you can find the right canbus option then then that might let you map keys, otherwise look in the software mods area.
- to test root, download something like superuser Su and see what it says (can only use it if rooted).
To be honest, I think the best you can do is to have a play with the options, if you aren't changing ROM etc its unlikely you'll do anything that is not reversible.

 

[noby95]

Might be worth you watching some youtube videos so can see what to expect. To answer some of your questions:

Thank you!
Hmm... I don't seem to have a "Navi Options" Menu. Where do you enter that menu?

 

[Mr Bigglesworth]

Thank you!
Hmm... I don't seem to have a "Navi Options" Menu. Where do you enter that menu?

Take a look at this but don't know if it will be the same for your unit.

 

[peti007]

2. If you have canbus SWC you cant remap it, just resistive SWC can.
3. In Factory Settings there is an option "swap canbus next prev" what you have to activate.

 

[optimiser]

Take a look at this but don't know if it will be the same for your unit.

The satnav audio mixing is in Settings>GPS Monitor.

Change it from Switched to Mixing
The volume is set at 10 on my unit.

 

[Brendo]

1. It'll go into a menu (check wiki)
2. If you are using canbus, you cannot remap. only if using SW connection
3. Try changing rudder setting in factory settings; otherwise perhaps canbus is intercepting incorrect
4. Check some of the software mods. Some can turn down audio when navigation needs to sound, then return back to normal

 

[norbert.ganslmeier]

Thank you all for the help!

Because of your help I figured out everything. And now the device is almost perfect much better than I expected!