New Primary Partitions for Mtk 6577/ 6582/ 6589 /6592 /8382 /8392

[ghost45]

New Thread for increase Primary Partitions for MTK Phones
Vers. 6577 / 6582 / 6589 /6592 /8382 /8392 ​

More attention to the Xda-developers Rules:
http://forum.xda-developers.com/announcement.php?f=256
Many thanks to "SUPER ADMIN" MR. MIKE

 

[ghost45]

Here we discuss or talk to the increase of the primary partition of all smartphones MTK 6577 / 6582 / 6589 /6592 /8382 /8392​

Hello to everyone,

Problem painful of all phones with the latest generation processors MTK was the system of Android installed on a primary partition very small!

Now I have tried to increase the primary partition !

Now no one can say it is not enough for the primary partition to install applications!

To saturate this partition it takes!

To simplify I pulled my two files ebr1 and ebr2 to go and directly replace the firmware!

These are the links to the various mods of the two files:


A) Section smartphone models with 32GB total memory

1) Change the primary partition to 2.49 gb. ( Mtk 6589 - 32gb ) .
These new files Heb who will carry the new primary partition to 2.46 gb
and 25.70 gb internal memory
http://d-h.st/uIH

2) Change the primary partition to 7gb . ( Mtk 6589 - 32gb )

These new files Heb who will carry the new primary partition to 7.05 gb
and 21.10 gb internal memory

http://www.4shared.com/zip/iR8iQSUq/Ebr-MTK_6589_partizione_7gb.html

3) Change the primary partition to 13.38 gb. ( Mtk 6589 - 32gb ) .

These new files Heb who will carry the new primary partition at 13:38 gb
and 14.67 gb internal memory

http://www.4shared.com/zip/ptdJTN3a/ebr-1338gb.html

4 ) NEW Editing primary partition to 16GB . ( Mtk 6589 - 32gb ) .

These new files Heb who will carry the new primary partition to 16 gb
and 16 gb internal memory
http://d-h.st/Igy

5 ) NEW Editing primary partition to 20gb . ( Mtk 6589 - 32gb ) .

These new files Heb who will carry the new primary partition to 20 gb
and 12 gb internal memory
http://d-h.st/Tdu

6) NEW Editing primary partition to 27GB . ( Mtk 6589 - 32gb ) .
These new files change the new primary partition to 27 gb
and the rest to the internal memory ( internal SD )
( Work Marsapa and Paul)
https://mega.co.nz/#!fcoFUCrT!L7T14i_g8Qww1PMOLjgfwjzLkb50En8tXPzeKF5LMy0
( file to be executed under recovery)



7)New Primary Partition up to 14 gb. (Mtk 6592- 32gb)
and the rest to the internal memory ( internal SD )
http://www.4shared.com/zip/Q6AT7zgEba/Ebr-14gb-mtk6592.html

8) New Primary Partition up to 16 gb. (Mtk 6592- 32gb)
These new files change the new primary partition to 16 gb
and the rest to the internal memory ( internal SD )
http://www.4shared.com/zip/ikKIruObce/Ebr-16gb-mtk6592.html

9) New Primary Partition up to 20 gb. (Mtk 6592- 32gb)
These new files change the new primary partition to 20 gb
and the rest to the internal memory ( internal SD )
http://www.4shared.com/zip/omtwetvUce/Ebr-20gb-mtk6592.html

10) New Primary Partition up to 27 gb. (Mtk 6592- 32gb)
These new files change the new primary partition to27 gb
and the rest to the internal memory ( internal SD )
http://www.4shared.com/zip/lZdZME8Mce/Ebr-27gb-mtk6592.html




B) Section smartphone models with 16GB total memory


1) New Primary Partition up to 2,49gb.(Mtk 6577 4gb e 6589 - 16gb).
http://www.4shared.com/rar/jXZ-htv8/246_gb_space-zp980.html

2) New Primary Partition up to 7gb.(Mtk 6589- 16gb)
and the rest to the internal memory ( internal SD )
http://d-h.st/1iz


3) New Primary Partition up to 11gb. (Mtk 8382 16gb).
http://www.4shared.com/zip/RP33XRK2ba/MTK8382-11GB.html


4) New Primary Partition up to 7gb. (Mtk 6592- 16gb)
and the rest to the internal memory ( internal SD )
http://www.4shared.com/zip/RehW_ehpce/Ebr-7gb-mtk6592.html

5) New Primary Partition up to 10 gb. (Mtk 6592- 16gb)
and the rest to the internal memory ( internal SD )
http://www.4shared.com/zip/FKP0Mn4yba/Ebr-10gb-mtk6592.html


6) New Primary Partition up to 13,29 gb. (Mtk 6592- 16gb)
and the rest to the internal memory ( internal SD )
http://www.4shared.com/zip/tG3PUmihce/ebr_1349_zp998.html+

7) New Primary Partition up to 13gb.(Mtk 6589- 16gb).
and the rest to the internal memory ( internal SD )
(Lavoro di Marsapa e Paolo)
chrome://mega/content/secure.html#!OBQ2gLzC!BUvuW0nA4I6qxSr5hozGcw-gEEEIV7RDtNFWI-aZo10
(run under recovery)

8) New Editing primary partition to 4 gb.(Mtk 6582 8-16gb).
http://www.4shared.com/zip/WjuRMFQWba/mtk6582-4gb.html

9) New Editing primary partition to 6 gb.(Mtk 6582 8-16gb).
http://www.4shared.com/zip/kWIzuOC8ce/mtk6582-6gb.html

10) New Editing primary partition to 8 gb.(Mtk 6582 8-16gb).
http://www.4shared.com/zip/Kow11LJuce/mtk6582-8gb.html

11) New Editing primary partition to 12 gb.(Mtk 6582 8-16gb).
http://www.4shared.com/zip/th7L_Tpxba/Mtk6582-12gb.html




C ) Section smartphone models with 8GB of total memory

1) New Primary Partition up to 5,4 gb.(Mtk 6589 8gb).
http://www.4shared.com/rar/imnC0TDxce/MTK6589-5_4GB.html

2) New Editing primary partition to 4 gb.(Mtk 6582 8-16gb).
http://www.4shared.com/zip/WjuRMFQWba/mtk6582-4gb.html


3) New Editing primary partition to 6 gb.(Mtk 6582 8gb).
http://www.4shared.com/zip/kWIzuOC8ce/mtk6582-6gb.html


D ) Section smartphone models with 4GB of total memory

1) Change the primary partition to 2.49 gb. ( Mtk 6577/6589 4gb ) .
and the rest to the internal memory ( internal SD )

http://d-h.st/uIH

2) Change the primary partition to 3GB . ( Mtk 6577 - 4gb ) .
and the rest to the internal memory ( internal SD )
https://mega.co.nz/#!yRwREIaI!CaUleAt927f-UILtKFgkPBlxy6wBU8jFhwvfnHivDV8
( file to be executed under recovery)
( Work Marsapa and Paul)


3) Change the primary partition to 2.5 gb. ( Mtk 6582 4gb ) ( zp700 ) .
and the rest to the internal memory ( internal SD )
http://d-h.st/zrb


4) Change the primary partition to 3 gb. ( Mtk 6582 4gb ) .
and the rest to the internal memory ( internal SD )
http://d-h.st/hDq


E) Section Primary partition for smartphone with new O. S. "KITKAT"

(Mtk 6592)

1) New Editing Primary Partition to 4Gb for KitKat O.S. (Mtk 6592 - 8-16-32gb).
http://www.4shared.com/rar/eqGWWk5Ice/ebr_4gb_kitkat.html


2) New Editing Primary Partition to 8Gb for KitKat O.S. (Mtk 6592 - 16-32gb).

http://www.4shared.com/zip/On3aQgjJba/Ebr_8gb-kitkat.html


3) New Editing Primary Partition to 10Gb for KitKat O.S. (Mtk 6592 - 16-32gb).

http://www.4shared.com/zip/yk1mwbmoce/Ebr_10gb_kitkat.html


4) New Editing Primary Partition to 13,19Gb (max possible on octa core) for KitKat O.S. (Mtk 6592 - 16-32gb).

http://www.4shared.com/zip/OdVk0FR1ba/Ebr_13gb_kitkat.html


(Mtk 6582)

1) New Editing Primary Partition to 1,49 Gb for KitKat O.S. (Mtk 6582 4-8-16-32gb).

http://www.4shared.com/rar/ggz3sbilba/EBR149_MTK6582.html

2) New Editing Primary Partition to 2,1 Gb for KitKat O.S. (Mtk 6582 4-8-16-32gb).

http://www.4shared.com/rar/Cm7x0jGtba/EBR21_MTK6582.html


3) New Editing Primary Partition to 2,44 Gb for KitKat O.S. (Mtk 6582 8-16-32gb).

http://www.4shared.com/zip/5kS7BxBTce/EBR_ZP700_24_KITKAT.html


4) New Editing Primary Partition to 3 Gb for KitKat O.S. (Mtk 6582 8-16-32gb).

http://www.4shared.com/rar/bSDRt7GQce/ebr-mtk6582-kitkat-3gb.html

5) New Editing Primary Partition to 4 Gb for KitKat O.S. (Mtk 6582 16-32gb).

http://www.4shared.com/rar/urk8BgLCce/ebr-mtk6582-kitkat-4gb.html

6) New Editing Primary Partition to 6 Gb for KitKat O.S. (Mtk 6582 16-32gb).

http://www.4shared.com/rar/2Lnxr3lQba/ebr-mtk6582-kitkat-6gb.html

7) New Editing Primary Partition to 8 Gb for KitKat O.S. (Mtk 6582 16-32gb).

http://www.4shared.com/rar/X-jFx2TBce/ebr-mtk6582-kitkat-8gb.html

8) New Editing Primary Partition to 10 Gb for KitKat O.S. (Mtk 6582 16-32gb).

http://www.4shared.com/rar/3jvmkjziba/ebr-mtk6582-kitkat-10gb.html

(Mtk 8392)

1) New Editing Primary Partition to 6-8-10-12-14-16-18-20Gb for KitKat O.S. (Mtk 8392 32gb).
http://forum.xda-developers.com/attachment.php?attachmentid=3226916&d=1427208956
2) New Editing Primary Partition to 6-8-10-12-14 Gb for KitKat O.S. (Mtk 8392 16gb).
http://forum.xda-developers.com/attachment.php?attachmentid=3227092&d=1427214418
(many Thanks to my friend Linuxovios


Following the installation procedure



P.S.
Those who have helped me a lot to reach the goal with their guides and tips!
Many thanks to:
Linuxovios, GORDONFIRE , BIOBIO76 , MARSAPA AND PAULTHL !




Let me know if you still have problems ,
hello

 

[ghost45]

New Primary Partition for New Mtk
Mtk 8392 is already made !​

 

[ghost45]

PROCEDURE:​

More important first of all is to check the drivers if are installed correctly!
try this last adb android :http://ge.tt/2yL21VT[/SIZE]​

​

​

1)You can flash or together the original firmware !
copy and replace the original ebr 1 and 2 and flash with flashtool together the firmware and make (firmware upgrade) !

2) After on the firmware that was preinstalled .. ...always using flashtool !
If you flash after the installation of the original firmware ...you can select only the two file ebr 1 and 2 ..and make download....... but you clear your custom on your phone!

The Correct procedure to flash is :

1) turn off the phone
2) remove battery and replace it without turn on the phone!
3) run flashtool with scatter file and the only two flags on the ebr 1 and 2
4) make download to the program flashtool
5) connect the usb cable to the pc

Download the original firmware and copy in this folder (the folder where do you unzip the firmware), the two ebr and try again!
This is the correct procedure...but make attention to not select all the files but only the two ebr!

In some situations that is not a bug...but is that after flash the ebr 1 and 2 the second partition must be formatted from the pc!

1) connect the phone to the pc with usb cable
2) Accept the to run on the usb storage in quick menu
3) In this moment the pc recognize the first partition....but we must enter on file manager or resources of the pc and click on the secondary storage!
4) The pc recognize that this secondary storage or partition is not formatted and says o you want to format this partition?
5) Say yes to the format procedure!

More Attention to the drivers if are correctly installed:

the debuging mode is when the phone is turn on but you must turn off the phone and remove the battery and replace it and DO NOT TURN ON!
If you say the phone is in charge ......this situation arrive after .....
You must connect the cable after you have run the flashtool to download button and in this phase the phone is connecting to the program (flashtool) but if this connection is broken arrive the charge phase!
You do not arrive in this phase....probably you do no have the right drivers installed !
Retry to reinstall the drivers adb android:
http://ge.tt/2yL21VT
try it
bye




And this is all !
bye:good::laugh:

 

[roninxt]

The 13.38 gb files have a bug. The sdcard cannot be mounted so it only shows the primary partition and not the phone storage.

 

[firefoxx5]

no phone storage

The 13.38 gb files have a bug. The sdcard cannot be mounted so it only shows the primary partition and not the phone storage.

I am having the same issue.....Please fix

 

[ghost45]

The secondary partition need to be format from pc!

I am having the same issue.....Please fix

The 13.38 gb files have a bug. The sdcard cannot be mounted so it only shows the primary partition and not the phone storage.

Hi Friends,
This situation is not a bug...but is that after flash the ebr 1 and 2 the second partition must be formatted from the pc!

PROCEDURE:
1) connect the phone to the pc with usb cable
2) Accept the to run on the usb storage in quick menu
3) In this moment the pc recognize the first partition....but we must enter on file manager or resources of the pc and click on the secondary storage!
4) The pc recognize that this secondary storage or partition is not formatted and says o you want to format this partition?
5) Say yes to the format procedure!

And this is all !

Check and give me an answer!
bye

 

[firefoxx5]

Hi Friends,
This situation is not a bug...but is that after flash the ebr 1 and 2 the second partition must be formatted from the pc!

PROCEDURE:
1) connect the phone to the pc with usb cable
2) Accept the to run on the usb storage in quick menu
3) In this moment the pc recognize the first partition....but we must enter on file manager or resources of the pc and click on the secondary storage!
4) The pc recognize that this secondary storage or partition is not formatted and says o you want to format this partition?
5) Say yes to the format procedure!

And this is all !

Check and give me an answer!
bye

Ok..before i saw this post i connected my phone to the PC and Immediately the request to format popped up....To be certain ....should i accept that request or should i ignore and go to the drive partitioning area of the PC, look for drive and format it there?

I am asking because i did some looking around and discovered others with the issue...which pointed to the mmc(scatter file) being the issue....offered reworked mmc (with their own ebr 1and 2 in the 2.46GB/25GB which i inserted into the updated firmware) and it worked and i am using it now. It was also stated not to accept this the format request because it would wipe an undesired memory. (It said the RAM, might have been a typo)

I would love to use your partitons so i await your response to the first question for needed clarity ... also my second question is can i use your EBRs with the mmc i obtained?

Forgive me for not just experimenting to discover the answers but at the time of this current post I have had the zp990 for about 14 hours and have flashed it more times than i have made phone calls(or anything else for that matter) and my luck varies ...sometimes it great sometimes it really stinks....and the phone becomes a paper weight before i talk to grandma

 

[ghost45]

Ok..before i saw this post i connected my phone to the PC and Immediately the request to format popped up....To be certain ....should i accept that request or should i ignore and go to the drive partitioning area of the PC, look for drive and format it there?

I am asking because i did some looking around and discovered others with the issue...which pointed to the mmc(scatter file) being the issue....offered reworked mmc (with their own ebr 1and 2 in the 2.46GB/25GB which i inserted into the updated firmware) and it worked and i am using it now. It was also stated not to accept this the format request because it would wipe an undesired memory. (It said the RAM, might have been a typo)

I would love to use your partitons so i await your response to the first question for needed clarity ... also my second question is can i use your EBRs with the mmc i obtained?

Forgive me for not just experimenting to discover the answers but at the time of this current post I have had the zp990 for about 14 hours and have flashed it more times than i have made phone calls(or anything else for that matter) and my luck varies ...sometimes it great sometimes it really stinks....and the phone becomes a paper weight before i talk to grandma

Hi Friend,
Sorry but i don't understand what you want to say to me!
But these file to make big partition ...erase all the information and data on your phone!
And so make some backup to restore after this procedure !
i repeit that my file run well and i have tested them before post in this thread ! here and to others forum!
bye:good:

 

[firefoxx5]

Hi Friend,
Sorry but i don't understand what you want to say to me!
But these file to make big partition ...erase all the information and data on your phone!
And so make some backup to restore after this procedure !
i repeit that my file run well and i have tested them before post in this thread ! here and to others forum!
bye:good:

Ok I formatted the disk and it is now mounting the drive
Thanks
One question....while in "apps" menu in "settings" No apps show the option of moving them to the phone storage. Is this feature suppose to be missing? I have a freelander i30 on 4.2.1 and the option is available. Is there a way to enable it?
Thanks again

 

[geoweb29]

Hi i have a zp990 phone and i whant to increase primary particion from 1.47 to 13 gb, i download the r1 and r2 13gb from this post ,next i dont know how to proced , what are all the steps from 0 , my zp990 is rooted. Thanks

 

[ghost45]

PROCEDURE:​

1)You can flash or together the original firmware !
copy and replace the original ebr 1 and 2 and flash with flashtool together the firmware and make (firmware upgrade) !

2) After on the firmware that was preinstalled .. ...always using flashtool !
If you flash after the installation of the original firmware ...you can select only the two file ebr 1 and 2 ..and make download....... but you clear your custom on your phone!

In some situations that is not a bug...but is that after flash the ebr 1 and 2 the second partition must be formatted from the pc!

1) connect the phone to the pc with usb cable
2) Accept the to run on the usb storage in quick menu
3) In this moment the pc recognize the first partition....but we must enter on file manager or resources of the pc and click on the secondary storage!
4) The pc recognize that this secondary storage or partition is not formatted and says o you want to format this partition?
5) Say yes to the format procedure!

And this is all !
bye:good::laugh:

 

[geoweb29]

copy and replace the original ebr 1 and 2 and flash with flashtool together the firmware and make (firmware upgrade) !


and how i do that,i have flash_tool 4.2 instaled in my pc , i opened and i dont know how to copy and replace the original ebr 1 and 2 , i see the firmware upgrade option

 

[roninxt]

copy and replace the original ebr 1 and 2 and flash with flashtool together the firmware and make (firmware upgrade) !


and how i do that,i have flash_tool 4.2 instaled in my pc , i opened and i dont know how to copy and replace the original ebr 1 and 2 , i see the firmware upgrade option

1. Download the firmware of your phone. Get it from the zopo forums.
2. Extract it. You will see the default ebr1 and ebr2 files.
3. Replace the ebr1 and ebr2 files with the one provided here.
4. Open flash tools and select the folder where you extracted the firmware files.
5. Select only the ebr1 and ebr2 files.

 

[geoweb29]

i did it , now i have a biger partitian for internal storage, thanks .

 

[JeeC]

1. Download the firmware of your phone. Get it from the zopo forums.
2..

Can someone post the link where to get the official firmware for the zp990 captain S? Because i cant find it and my sotrage for apps has just 73MB free left lol
And can u describe more perfectly how u flash the official firmware step by step with the flash tool on pc please
?
Thanx in advance

 

[ghost45]

Can someone post the link where to get the official firmware for the zp990 captain S? Because i cant find it and my sotrage for apps has just 73MB free left lol
And can u describe more perfectly how u flash the official firmware step by step with the flash tool on pc please
?
Thanx in advance

Hi friend,
is not necessary to enter in zopo forum i have made several Threads here in XDA-

find the zp990 Thread ...there are all that you want !

http://forum.xda-developers.com/showthread.php?t=2403825

bye

 

[JeeC]

Hi friend,
is not necessary to enter in zopo forum i have made several Threads here in XDA-
find the zp990 Thread ...there are all that you want !

http://forum.xda-developers.com/showthread.php?t=2403825

bye

Thank u for this but in mobile uncle i find my OS display is ZP990 20130904-163745. So which one of the firmware should i use?

 

[JeeC]

i can't even make it to the flashing of firmware with the ER1 adn ER2 files... i do all like it's said here http://www.youtube.com/watch?feature=player_embedded&v=0v_cae5p_go#t=58 but the bar in flashtool doesn't go red.i installed all the drivers adn i use win8...when my phone is off and i plug it after cloicking download then flashtool doesn't start

i'm sorry but the procedure with flashtool is not explain and it would be very appreciable to have details from a 0 start for newbies like me.

 

[androidia]

cubot one MT6578 8gb rom

Hi Guys,
I will appreciate if some can let me know if I can use this method to repartition my cubot one, only 1gb internal storage with 5,75gb as ext-sd. 1gb just to small to fit all my apps. I will appreciate any response.

Thanks