[NEW][Recovery]CWM 6.0.5.1[Kitkat Supported][LATEST/UPDATED][RESOLUTION ISSUE SOLVED]

[digyvijaykumar123]

#include 
/*
 * Your warranty is now void.
 *
 * I am not responsible for bricked devices, dead SD cards,
 * thermonuclear war, or you getting fired because the alarm app failed. Please
 * do some research if you have any concerns about features included in this ROM
 * before flashing it! YOU are choosing to make these modifications, and if
 * you point the finger at me for messing up your device, I will laugh at you.
 */

CWM RECOVERY 6.0.5.1 FOR A110Q​

REQUIREMENTS:-
[FOR PC]Sp Flash Tool
[FOR MOBILE]Root and MOBILE UNCLE TOOLS APP

BUGS:-TESTED & BUGLESS (IF YOU REPORT A BUG THEN I WILL NEVER BELIEVE YOU)

DOWNLOADS- CWM.6.0.5.1.img
CWM.6.0.5.0.img​

HOW TO INSTALL:-
MOBILE

• Download the recovery.img and Put it in root of your SDCARD
• Open Mobile uncle tools app and select Recovery Update
• When prompt select Yes and then again yes to reboot into recovery to check it is working or not.
• Done

PC

• Install USB drivers for your phone using Micromax drivers or if already installed then OK.
• Extract the Stock ROM folder and replace recovery.img with cwm recovery which you downloaded from here.
• Open the SP Flash Tools.
• In SP Flash Tools, click on Scatter-Loading and the program will ask you the location of the scatter loading file for your device select mt6589 scatter file.txt
• Check only recovery.img, preloader and uncheck all others
• Switch off your phone (Remove the battery)
• In Flash Tool, go to Options and Click USB Mode so that it is enabled. Click options again and then go to DA Download All > Speed and finally select High Speed.
• Click the Download option (present on the right of Firmware>Upgrade option) and the flash tool will start looking for your phone.
• Connect your phone now. The Flash Tool will start the flashing process, the progress of which can be viewed from a yellow progress bar at the bottom of the flash tool.
• After the process completes, a green ring will appear on your device signalling that the process was successful.
• Disconnect and reboot or go to recovery to check it.

Kernel Used:-Kash Kernel Stable

CREDITS:-
koushik Dutta FOR HIS CLOCKWORK-MOD RECOVERY.
@chrmhoffmann for compiling.
@kashifmin For his kernel & Support.
​

 

[digyvijaykumar123]

Older version

CWM RECOVERY 6.0.4.4 FOR A110Q​

REQUIREMENTS:-
[FOR PC]Sp Flash Tool
[FOR MOBILE]Root and MOBILE UNCLE TOOLS APP

BUGS:-TESTED & BUGLESS (IF YOU REPORT A BUG THEN I WILL NEVER BELIEVE YOU)

DOWNLOADS
With Mmx Theme:-CWM 6.0.4.4
Without Mmx Theme:-CWM 6.0.4.4​

HOW TO INSTALL:-
MOBILE

• Download the recovery.img and Put it in root of your SDCARD
• Open Mobile uncle tools app and select Recovery Update
• When prompt select Yes and then again yes to reboot into recovery to check it is working or not.
• Done

PC

• Install USB drivers for your phone using Micromax drivers or if already installed then OK.
• Extract the Stock ROM folder and replace recovery.img with cwm recovery which you downloaded from here.
• Open the SP Flash Tools.
• In SP Flash Tools, click on Scatter-Loading and the program will ask you the location of the scatter loading file for your device select mt6589 scatter file.txt
• Check only recovery.img, preloader and uncheck all others
• Switch off your phone (Remove the battery)
• In Flash Tool, go to Options and Click USB Mode so that it is enabled. Click options again and then go to DA Download All > Speed and finally select High Speed.
• Click the Download option (present on the right of Firmware>Upgrade option) and the flash tool will start looking for your phone.
• Connect your phone now. The Flash Tool will start the flashing process, the progress of which can be viewed from a yellow progress bar at the bottom of the flash tool.
• After the process completes, a green ring will appear on your device signalling that the process was successful.
• Disconnect and reboot or go to recovery to check it.

Kernel Used:-Kash Kernel Stable

CREDITS:-
koushik Dutta FOR HIS CLOCKWORK-MOD RECOVERY.
@carliv FOR CUSTOMIZING THIS VERSION
@kashifmin For his kernel & Support.
​

 

[[email protected]]

Its miracle good work man.waiting for more features in kernel next build

Sent from my A110Q using XDA Premium 4 mobile app

 

[chrajendranath]

great work bro..

 

[TypicalAndroidUser]

super!

great work man! will definitely check this out! BTW any idea as to when Kitkat might release for our device?

 

[digyvijaykumar123]

Update

Recovery Update:

-Version 6.0.5.0 added.
-Latest CWM compiled with CM11 4.4.4 M8

 

[BOPOH'Ok]

Recovery Update:

-Version 6.0.5.0 added.
-Latest CWM compiled with CM11 4.4.4 M8

Best work bro, on Fly IQ450Q works fine ... works correctly ...:good::good::good:

 

[digyvijaykumar123]

UPDATE


NEW 6.0.5.1 Version Added!!
Changelog:
-Sync with CM latest Source.
-configured to install via CMUPDATER

Regards-

 

[johnson2rock]

no more updates?