New TS10 UIS7862 6gb ram 128gb head unit q&a's

[timido64]

My multimedia has version 11 of android. Is this firmware update for units with Android 11?

Are you sure it's not a modified version and it's just "API 29" (Android 10) instead of "API 30" (Android 11)?
Vendors are good at disguising their versions, try checking with "CPU-Z" or similar APKs to confirm.

Take a picture of the firmware version you have.

image example:

 

[timido64]

I would be really thankful if someone can verify this?
I've searched the topic an saw you need Tlink 1.9.5 but is could quite make out that Android auto will definitely work wireless.

Hi,

I tried but after I got information on the net and it seems that it only works between devices that have "Android 10".
My smartphones are all old, with older versions of "Android 10"... I couldn't verify.

 

[Pacjonek]

Good morning,

I wouldn't try "2.2" firmware on devices with "1.2" firmware... but I would try this: TS10.1.2_20220514.130539_TW1-V2

Thinking that the update could bring other problems, instead of solving them, please.

Someone correct me if I'm wrong but you can do a downgrade at any time if you find that it's worse than it was

 

[timido64]

Hi,
Unless other problems you can do it... I did it...

But let's talk about TS10 UIS7862 6gb ram 128gb.

 

[darkvoid]

I would be really thankful if someone can verify this?
I've searched the topic an saw you need Tlink 1.9.5 but is could quite make out that Android auto will definitely work wireless.

I'm currently on TLINK_dw_2.0.17_20221121103546 and it supports Android Auto Wireless on my device.
Before that using TLINK_dw_2.0.12_20220824040630 also just fine with Wireless AA.

 

[mauricewal]

I'm currently on TLINK_dw_2.0.17_20221121103546 and it supports Android Auto Wireless on my device.
Before that using TLINK_dw_2.0.12_20220824040630 also just fine with Wireless AA.

Thanks for this.
I am planning to buy a rebranded TS10 (QT10) for my Renault Megane 3.

 

[Neolan67]

Tell me how you can make the
device ask for a password at startup. I didn't find this feature on the device itself.
Maybe it can be done programmatically somehow?

 

[Sarsbucket]

My multimedia has version 11 of android. Is this firmware update for units with Android 11?

You have Android 10, trust me. Its API 29.
What you need to check is if you use 2.2

Someone correct me if I'm wrong but you can do a downgrade at any time if you find that it's worse than it was

Correct. If you find a firmware is not to your liking, and a previous version worked better, you can reinstall the old one. Ive done this with no problems, even with paid themes.

 

[tlf55]

I'm currently on TLINK_dw_2.0.17_20221121103546 and it supports Android Auto Wireless on my device.
Before that using TLINK_dw_2.0.12_20220824040630 also just fine with Wireless AA.

Can you link the 2.0.17 version so i can test ?

 

[darkvoid]

Can you link the 2.0.17 version so i can test ?

List of TLINK versions availables

Hello! I'm a new user of a ONWICE T10 Android Head Unit and tester of a lot of versions of TLINK APK, specially for CarPlay. After begging a lot I get a possible latest version of that app but still doesnt works decently. I dont know if it...

forum.xda-developers.com

 

[jeanad]

Are you sure it's not a modified version and it's just "API 29" (Android 10) instead of "API 30" (Android 11)?
Vendors are good at disguising their versions, try checking with "CPU-Z" or similar APKs to confirm.

Take a picture of the firmware version you have.

image example:

it really is api 29 but it says it's android is 11 . I think this firmware should work then correct?

 

[CorvetteCole]

Hello, my head unit works fine with TLink wirelessly, but I want to use Head Unit Reloaded instead so I can set the display margins (otherwise screen is kind of cut-off). and because it is faster. Head Unit Reloaded needs bluetooth via the Android system APIs, which I manage to get using the "bluetooth data connection"... and it works!! One problem.. phone calls will not go through the car, since the data connection does not support audio. I try to connect phone to the data connection AND the normal bluetooth connection so it will use it for phone calling. I managed to get that to work once in a 2 hour period, but not reliably. Any ideas? Maybe there is an app I can use to enable bluetooth phone calling with the Android bluetooth APIs (data connection)?

..I can use TLink, but the display being cut-off on the left is VERY annoying, and it is slow

 

[darkvoid]

Hello, my head unit works fine with TLink wirelessly, but I want to use Head Unit Reloaded instead so I can set the display margins (otherwise screen is kind of cut-off). and because it is faster. Head Unit Reloaded needs bluetooth via the Android system APIs, which I manage to get using the "bluetooth data connection"... and it works!! One problem.. phone calls will not go through the car, since the data connection does not support audio. I try to connect phone to the data connection AND the normal bluetooth connection so it will use it for phone calling. I managed to get that to work once in a 2 hour period, but not reliably. Any ideas? Maybe there is an app I can use to enable bluetooth phone calling with the Android bluetooth APIs (data connection)?

..I can use TLink, but the display being cut-off on the left is VERY annoying, and it is slow

You can configure TLINK to appear in a better way:

[GUIDE] TLink Hi-DPI Split Mode Android Auto / CarPlay

Thanks to the earlier thread with TLink versions, I updated my TLink to v2.0.12. I've only tested the below on this version, so its best to grab it from there. Additionally I only have Android, so this is tested on Android Auto only. It turns...

forum.xda-developers.com

Also, use the latest version in the thread linked earlier. I've used both and I can say that TLINK is more stable and faster by a large margin compared to Head Unit Reloaded.

No disconnects with TLINK at all, where-as Head Unit Reloaded is a hit or miss.

 

[timido64]

it really is api 29 but it says it's android is 11 . I think this firmware should work then correct?

Yes.

Knowing what has always been said, if everything works out...?

 

[hakim_radzuan]

Hi, i have some issue lately. Everytime start the car after overnight or let say 6-7 hours, my radio will auto go to 88.50 frenquency. So that i have to manually pick saved radio station.

But if i start the car for 2-3 hours then it can go straight to the last radio frenquncy i had listening.

Any setting i should check?

 

[timido64]

Good morning,

Set a longer waiting time, look at the attached image:

 

[Lucaluca95]

Anyone ever had this problem? New t10 from Navistar and stuck on heated seats which I haven't... That overlay is impossible to remove. I'm trying to set it to a Toyota Yaris 2018

 

[CorvetteCole]

You can configure TLINK to appear in a better way:

[GUIDE] TLink Hi-DPI Split Mode Android Auto / CarPlay

Thanks to the earlier thread with TLink versions, I updated my TLink to v2.0.12. I've only tested the below on this version, so its best to grab it from there. Additionally I only have Android, so this is tested on Android Auto only. It turns...

forum.xda-developers.com

Also, use the latest version in the thread linked earlier. I've used both and I can say that TLINK is more stable and faster by a large margin compared to Head Unit Reloaded.

No disconnects with TLINK at all, where-as Head Unit Reloaded is a hit or miss.

Is there a way to set a margin on the screen? My screen goes under the frame by like 10-20 pixels, cutting off part of the left edge of the UI (same problem as this guy: https://forum.xda-developers.com/t/...m-128gb-head-unit-q-as.4227947/post-87793363l).

That is my primary motivation for using Head Unit Reloaded. Also, I can disable rotary input which makes Coolwalk work

 

[timido64]

Hi,

@Drahy

Updated successfully... all working.

Hi,

Unfortunately, after a few days of use, the radio started giving problems, sudden reboots, audio speedup not working, low volume, etc.

Back to the more reliable (for me...) TS10.1.2_20220721.111654_WINDOW-THEME1.

 

[iskenderr]

I have a volume TS18.2.2_20221114.161350_WINDOW-THEME1. Even if I reset the factory settings from the menu, the APKs that were installed later are installed again. How can I convert it to real factory settings? (Do not harm TPLINK activation). Google Play Store won't open because I'm trying to reset it to factory settings. Even if I install the Google store later, the Google play store does not open, the application not found message appears. (Translate google Turkish to English)
@orhan02 Sanırım Türkçe dil ile yardımcı olabilirsiniz.