- Nov 25, 2007
Maybe not for you, but I'm using this 6.38x4.75x1.75" stereo amp, dual mono voltage boosted, sized to fit behind the TS10, priced for the pauper:Hey guys I got a new TS10 3 months ago, I noticed that the amp that soldered to the PCB is TDA7388 that for my understanding pretty crap… so I wonder what to do(in a cheap way..), I can buy a new TDA7850 with capacitor that I know will works fine.. I can order an 7851 but I don’t know if there is any modifications needed… or I can order this amp: https://a.aliexpress.com/_EGoxYwp
I would like any advice or something that not really really expensive or complicated as buying a huge amp and start stripping cables…
Ok thanks for the fast replay but I’m not that familiar with that stuff, can you explain? Maybe send a link to guide?Maybe not for you, but I'm using this 6.38x4.75x1.75" stereo amp, dual mono voltage boosted, sized to fit behind the TS10, priced for the pauper:
Available all over, AliExpress, Amazon, eBay etc, it is a XH-M641 Amplifier Board, but the finished board needs mounting in a suitable case with standoffs/fuse/in/out terminals.Ok thanks for the fast replay but I’m not that familiar with that stuff, can you explain? Maybe send a link to guide?
Several steps must be followed to return the head unit to workView attachment 5820629Seeing if anyone can shed some light. I tried to update my new t10 and when I first initially tried to update I got the message that the update was done but it never went away from the screen which you see attached. Eventually I rebooted and now I’m only seeing the Toyota logo.
Is the unit bricked?
Unfortunately, sometimes I do not understand what is required because of the incorrect translation. Do an older update. If the problem is not resolved, there may be changed settings that caused this. Please attach pictures of the device or make a short video of the problem to be clearer and we can help better than that.Hola, eh visto que tienen mucha información sobre esta radio. Yo cuento con una. en la última actualización empezó a generar un problema, la radio se apaga la pantalla a veces siguiendo con su funcionamiento. Ejemplo escucho música por Youtube y se apaga la pantalla pero el audio y la aplicación está en función. Alguien le a pasado?
Thanks for the reply..Several steps must be followed to return the head unit to work
1-Finding out which firmware is right for you is it if you have a 360 degree camera ts10.1.1 or without a 360 degree camera ts10.1.2 ts10.1.1 & ts10.1.2 firmware
2-After you know the correct firmware, decompress it and put it on a fat32 flash drive
3- Disconnect the power socket from the head unit
4- Connect the update flash drive, it is preferable to have a four-pin USB port
5-Connect the wire of key1 or key2 with the ground wire (the black wire or with the metal body)
6-Connect the power socket(The red wire and the yellow wire are connected to 12 volts), keeping in mind that the key1 or key2 wire is connected to the ground wire
7-After the green update bar appears, disconnect the key1 wire from the ground wire
8-After about 10 to 15 minutes, the head unit will come back to life
The THEME-V2 means vertical?Thanks for the reply..
So 360 = TS10.1.1
Without 360 = TS10.1.2
I don't have the 360 version, so 1.2 was correct.
Do you know what the difference is between the THEME-V2 versus the THEME1?
TS10.1.2_20221118.190910_WINDOW-THEME1.zipEstá es la versión que tengo, a veces tiene intermitencia la pantalla. No es siempre.
You must try to update another, but do not put this file permanently with the update ( a34a385a-9cbf-11ea-bb71-a36a7d5faaf4 )View attachment 5821379
Here’s a picture after trying the firmware, TS10.1.2_20220817.113359_THEME1. After the update completes, it just sits on this screen. No movement. Shouldn’t it reboot and start the actual OS install?
So remove the file on the usb a34a385a-9cbf-11ea-bb71-a36a7d5faaf4 ?You must try to update another, but do not put this file permanently with the update ( a34a385a-9cbf-11ea-bb71-a36a7d5faaf4 )
Do you have a picture of the launcher or even a picture of it from the internet that can help to know the firmware
There is no problem with the black screen, but the problem now is knowing the correct firmware. I have gone through this before and the problem has been solvedSomething to note now. After trying to install the last firmware, It’s no longer powering up. Black screen now and nothing comes up.
You can follow the instructions in the attached photo.Hi Everyone,
My head unit got stuck in a boot loop , the system doesn't start. Is there any way to get into bootloader (side buttons don't work) to update the firmware (current: TS10.1.2_20220705.150732_THEME1)?
Thanks for your work and help.
Wthh??? Its not even our fault? If i knew something like this would happen i wouldnt upgrade it
Do update your progress as well. I did a thing also with my unit. Tried downgrading it. Seems like it goes away. But sometimes the problem came back. Luckily yesterday I was on 2 hour drives and it hold through.Ok, so someone I know who had this problem has solved the issue. He did a factory reset, and not only did the new firmware remain, the problem went away as well.
I've done the same so fingers crossed.
Friend my Ts10 4/32 is having the same problem,
Could you please give a screenshot of the setting you changed or at least where in the settings the function is.