New TS10 UIS7862 6gb ram 128gb head unit q&a's

[Medo2018]

Believe it or not I did that 10 seconds before your reply, I waited a short while for it to reboot and well...nothing changed, is the same exact version as before, I checked the version data, is the same numbers.

Just push the RST button on the top left with a needle, it will reboot.

 

[VooXoo]

The red text pop-up gone away, but nothing changed after the update.
Maybe is because there was a long pause between the process and when I finally realized I just had to restart it from the "restart" button on the schrool down menu, it nulled the whole thing because it wasn't in a single go??

 

[Medo2018]

The red text pop-up gone away, but nothing changed after the update.
Maybe is because there was a long pause between the process and when I finally realized I just had to restart it from the "restart" button on the schrool down menu, it nulled the whole thing because it wasn't in a single go??

Re-install the new firmware again, if the upgrade failed again, then you better do a factory reset and then reinstall.

 

[bertfelin]

The red text pop-up gone away, but nothing changed after the update.
Maybe is because there was a long pause between the process and when I finally realized I just had to restart it from the "restart" button on the schrool down menu, it nulled the whole thing because it wasn't in a single go??

The same exactly happened to me last night. to work around is try to force update.
1. put the zip file in the root fold of your USB drive. and plug into the car.
2. use the paperclip hit the reset hole, wait for the restart, and when the logo shows turn the key to OFF.
3. after the screen shut off, wait 5 seconds then turn the key to ACC or ON.

it will start updating itself.

 

[timido64]

Good morning everyone,

After these last comments, I believe that the firmware for TS18 has a different update procedure from TS10, in fact it seems that you can just put the .zip archive into the USB without needing to unzip it.

 

[Medo2018]

Good morning everyone,

After these last comments, I believe that the firmware for TS18 has a different update procedure from TS10, in fact it seems that you can just put the .zip archive into the USB without needing to unzip it.

That’s true, Firmwares after September 2022 can read directly from the zip file, and I believe this was applicable to both TS10/TS18, as stated before by Dofun developer.

 

[JZX100_2JZ]

Recently installed a TS10 8GB/128GB. As a new user, I feel it unstable and don't know where it went wrong.

1) My set will somehow restart itself. Usually it happen on bumpy roads. I do not know due to what.

2) Due to the restart, some of apps will just login and consider user "Missing". Which means it don't auto log out. Have to restart the unit and then re login again.

3) My Waze went haywire. I logged in my profile. During my drive, it restarted and now I can't login into my Waze. Every time it ask for verification, the e-mail appears in my phone but I can't verify in my phone. I now logging into Waze as guests. Any solution to this?

 

[VooXoo]

The same exactly happened to me last night. to work around is try to force update.
1. put the zip file in the root fold of your USB drive. and plug into the car.
2. use the paperclip hit the reset hole, wait for the restart, and when the logo shows turn the key to OFF.
3. after the screen shut off, wait 5 seconds then turn the key to ACC or ON.

it will start updating itself.

big thanks from me
that procedure worked flawlessly, it took a bit longer than the previous one, but the OS version did change
the text feels a bit bigger, but aside that and a new top icon I couldn't notice other changes, I made the update and left the car to a workshop right after, had to refill the A/C
someone have a link to the changelog for the updates the OS received after 2021?

and when I'm at it, the bluetooth app is bound to the OS or we can update it separately like the radio?

 

[NeamtuAlin]

Hi can anybody share a high rezolution photo of the zenner diodes of the touch screen soket.The 4 diodes are just above the soket.Thanks

 

[Pacote-san]

Just found out that the redmod russian firmware has built-in app to reassign any of the cars buttons (wheel, panel etc) when you use a canbus

Hope somone port it to the stock firmware in the future.

 

[ksloh1]

Hi All,

Here is the Dofun Play apk incase your have format your headunit and the standard app are missing. Dofun is the company that makes theme for Topway headunit T series. Inside this app have the theme app and the others useful app ONLY for Topway T series.

Note : INSIDE this app have a TLINK5 too. TLINK5 and TLINK are different variant and have different license. IF your headunit comes with TLINK5 than can update it to latest version, if your headunit comes with TLINK, then you can only can update the others app NOT TLINK.

 

[Onkypig]

What is the procedure to backup our current firmware, before flashing/upgrading?
Also, has anybody had resolving issues with bluetooth by upgrading MCU or firmware? External DAC bluetooth application refuses to stay connected to DAC. The bluetooth works for my phone and also a bluetooth application for an air ride pneumatic solenoid valve air lift functions and connected properly as well.

 

[bobcuspe21]

First, forgive my English.

I would like to know if it is possible to update. If so, which file?

Thanks.

 

[Onkypig]

First, forgive my English.

I would like to know if it is possible to update. If so, which file?

Thanks.

make sure you only update base firmware 2.2_xxxxxx

Topway TS10/TS18 Firmware – PausaCafeOne

 

[bobcuspe21]

make sure you only update base firmware 2.2_xxxxxx

Topway TS10/TS18 Firmware – PausaCafeOne

Thanks.

Is this the update file?
TS10.2.2_20230427.174322_VENTANA-TEMA1

 

[timido64]

Hi @bobcuspe21

Yes, this firmware is correct...

 

[bobcuspe21]

Hola [USUARIO=12584309]@bobcuspe21[/USUARIO]

Sí, este firmware es correcto...

Thanks!!

 

[bobcuspe21]

Guys, is it possible to change the Bluetooth theme? The theme that comes from the factory is horrible!!

 

[Anton TNT]

Guys, is it possible to change the Bluetooth theme? The theme that comes from the factory is horrible!!

Yes use different theme or find/download/install different "3COM.ts.mainUI8" process, it will change default one for all apps installed

 

[Anton TNT]

TS18 TOPWAY

For case if users can't change logo or sellers are not allowing them to change logos and boot anim download and use this logos :
https://drive.google.com/drive/folders/1oA_IE0kGQG6LsRr2vgU_w6ioOF9IiXSc (logos and wallpapers are here)

Procedure for installing BOOT LOGO :

Find your default logo installed on root directory (usually is on ANDROID/DATA/.../logo or something like that - find it where is exactly - image would be like that logo_xxxx.png)
Copy and paste that file "logos_xxxx.png" or what ever it is called to USB drive and put to a PC and edit that specific file with some imaging program (I suggest using a Photoshop or Macromedia Fireworks 8 - OLD program but I have this for years and always do imaging on that program) and put your desired logo (but remember SAVE AS IT WAS, only press SAVE and rewrite , NO RENAMING of that file or "saving as" , otherwise app/process responsible for calling up logo to bootscreen wil not work or will be distorted or not there at all - black screen).
When saved, turn this file back to original place on unit and restart.
After restart you should see your logo on bootup.