New Update for the Galaxy Watch & Galaxy Watch Active 1

[adfree]

The tricky part for me is to maintain connection while loading the AP BT and CSC files in NetOdin. I sometimes have to start all over again when the connection got lost

Try FIRST to choose all files in netOdin...
Computer need few Seconds to check MD5 Hashes...
If all done...

Only then connect Watch.

For me this is perfect timing...

Best Regards

 

[maujogue]

It is not difficult. I've done it quite a few times without problems. The tricky part for me is to maintain connection while loading the AP BT and CSC files in NetOdin. I sometimes have to start all over again when the connection got lost (= the IP address is not showed anymore in NetOdin).
Once the files are loaded and the IP address is still shown, it's just a matter of pressing the start button and leave watch and laptop for about 20 mins.
One tip: disconnect any network cable from the laptop before you start. NetOdin can have difficulties connecting to your watch if you don't remove the cable.

About when to expect the DSL1 update in Europe: it took the CSG4 update 17 days to cross the ocean after release in the US. DSL1 was released December 10th in the US, so it looks like it will take a few more days if crossing the ocean takes as long as it did for CSG4.

Thank you for your feedback, very complete and informative !

 

[maujogue]

Got my watch active today from a marketplace... Looks like it's an emirat Arab nations version ! It's a bit funny but I guess I won't be regretting to change to XAR. Good news I guess ?

 

[Hitman42]

When i try To connect laptop to watch by WiFi it says "connection fails : connection time out"
My pc says "connected but limited"

Any helps here?

 

[maujogue]

When i try To connect laptop to watch by WiFi it says "connection fails : connection time out"
My pc says "connected but limited"

Any helps here?

Didn't have this issue ... I got one other and it was fixed by switching of PC somehow. Try this if you can !

 

[adfree]

Next "Wave" from Samsung... this time ca. 10 more CSC can get DSL1 Firmware via FOTA... over the air update:
Tiny overview:

ACR: R800XXU1CSG4
AFR: R800XXU1CSG4
ARO: R800XXU1[B]DSL1[/B]
ATO: R800XXU1CSG4
AUT: R800XXU1CSG4
BGL: R800XXU1CSG4
BRI: R800XXU1CSG4
BTU: R800XXU1CSG4
BVO: R800XXU1[B]DSL1[/B]
CAC: R800XXU1CSG4
CAM: R800XXU1CSG4
CHC: R800XXU1CSG4
CHO: R800XXU1[B]DSL1[/B]
COO: R800XXU1[B]DSL1[/B]
DBT: R800XXU1CSG4
ECT: R800XXU1CSG4
EUR: R800XXU1CSG4
ILO: R800XXU1CSG4
INU: R800XXU1CSG4
ITV: R800XXU1CSG4
KOO: R800XXU1[B]DSL1[/B]
KSA: R800XXU1CSG4
LUX: R800XXU1CSG4
LYS:
MID: R800XXU1CSG4
MWD: R800XXU1CSG4
MXO: R800XXU1[B]DSL1[/B]
MYM: R800XXU1CSG4
NEE:
NPL: R800XXU1CSG4
PAK: R800XXU1CSG4
PEO: R800XXU1[B]DSL1[/B]
PHE: R800XXU1CSG4
PHN: R800XXU1CSG4
ROM: R800XXU1CSG4
SEB: R800XXU1CSG4
SEE: R800XXU1CSG4
SEK: R800XXU1CSG4
SER: R800XXU1CSG4
SKZ: R800XXU1CSG4
TGY: R800XXU1CSG4
THO: R800XXU1CSG4
THR:
TMC:
TPA: R800XXU1[B]DSL1[/B]
TPH: R800XXU1CSG4
TTT: R800XXU1[B]DSL1[/B]
TUN: R800XXU1CSG4
TUR: R800XXU1CSG4
UPO: R800XXU1[B]DSL1[/B]
XAC: R800XXU1[B]DSL1[/B]
XAR: R800XXU1[B]DSL1[/B]
XEF: R800XXU1CSG4
XEH: R800XXU1CSG4
XEO: R800XXU1CSG4
XEZ: R800XXU1CSG4
XFA: R800XXU1CSG4
XJP: R800XXU1CSG4
XME: R800XXU1CSG4
XNZ: R800XXU1CSG4
XSA: R800XXU1CSG4
XSE: R800XXU1CSG4
XSG: R800XXU1[B]DSL1[/B]
XSK: R800XXU1CSG4
XSP: R800XXU1CSG4
XTC: R800XXU1CSG4
XXV: R800XXU1CSG4
ZTO: R800XXU1[B]DSL1[/B]

Only as info.

Best Regards

 

[AndreCalado]

I confirm Active 1 update for ZTO, Brazil. Most CSCs probably should have been updated now. This wave was very comprehensive. But it lacks the watchfaces from active 2, thought they would come along, but they wasn't listed in update notes anyway indeed. Does anyone know whether we are getting them or not?

 

[DJ Palmis]

Firmware flashing itself will never change csc (if you use Firmware which contains your current csc)

So ITV is one of the OXA Multi-CSC and you can flash without changes.

So what do you suggest me?

Should I flash:
- again the 3 files? Will Samsung pay work?
- an (old) ITV image and wait the OTA update? Where can I find an official ITV image?


Inviato dal mio SM-T820 utilizzando Tapatalk

 

[adfree]

Where can I find an official ITV image?

Try to look into this post:
https://xdaforums.com/showpost.php?p=81307213&postcount=186

ALL CSC are inside SAME Firmware files...

You can check this, with Tool 7zip...

CSC_OXA_R800OXA1DSL1_usr.tar.md5

Unpack with 7zip

csc.img

Extract with 7Zip

Click around with Filemanager of your choice...

Where can I find an official ITV image?

This is wrong conclusion...

You have to differ between CSC as funny 3 letter... "text string"...
And as ACTIVE CSC stored in CSA Security partition...

You can use Google... CSC mechanism is used since years...
And still Running Gag...


Best Regards

 

[DJ Palmis]

This is wrong conclusion...



You have to differ between CSC as funny 3 letter... "text string"...

And as ACTIVE CSC stored in CSA Security partition...

Oh..
So I misunderstood the CSC: one is the binary image and the other is a sort of ID string!
Thank You so much.

So I must reflash the 3 files from https://xdaforums.com/showpost.php?p=81261659&postcount=133

And I will have an "official" itv rom image.
Right?
Thank you so much @adfree

Inviato dal mio SM-T820 utilizzando Tapatalk

 

[Indefinite Implosion]

Is it also possible to force the update for the Active (R500)? Thanks

 

[adfree]

https://xdaforums.com/showpost.php?p=80072694&postcount=786

Found my old post... how to identify active CSC with Tizen App from Store... instead SDB etc...

Is it also possible to force the update for the Active (R500)? Thanks

A
https://xdaforums.com/showpost.php?p=81261659&postcount=133

DSL1 Firmware is also for SM-R500 linked...

B
You could change active CSC...

C
wait

Best Regards

 

[Courtrick]

Has anyone in the UK got the update yet??

 

[Stuflo]

Has anyone in the UK got the update yet??

Nope

 

[ronaldheld]

Finally got my update of 118 Mb.
UI 1.5

R800XXU1DSL1

 

[umair shaikh]

https://xdaforums.com/showpost.php?p=80072694&postcount=786

Found my old post... how to identify active CSC with Tizen App from Store... instead SDB etc...





A
https://xdaforums.com/showpost.php?p=81261659&postcount=133

DSL1 Firmware is also for SM-R500 linked...

B
You could change active CSC...

C
wait

Best Regards

very new on the watch active thread here.....
are there any set of instructions on how to flash ?
i have a (SM-R500) version of the watch


also, will my ota updates stop if i manually flash it ?

 

[Courtrick]

Does anyone know the UK csc code I was hoping it was BTU but I could be wrong

---------- Post added at 07:50 AM ---------- Previous post was at 07:35 AM ----------

Does anyone know the UK csc code I was hoping it was BTU but I could be wrong

Also is this update for r500 or not I'm confused

 

[Stuflo]

Does anyone know the UK csc code I was hoping it was BTU but I could be wrong

---------- Post added at 07:50 AM ---------- Previous post was at 07:35 AM ----------


Also is this update for r500 or not I'm confused

It is BTU

 

[congusto]

Does anyone know the UK csc code I was hoping it was BTU but I could be wrong.
Also is this update for r500 or not I'm confused

The CSC for UK unbranded is indeed BTU, and the update will also come to the R500.

---------- Post added at 09:17 AM ---------- Previous post was at 09:14 AM ----------

Finally got my update of 118 Mb.
UI 1.5
R800XXU1DSL1

That's great, Ronald. Which region?

 

[Courtrick]

K thanks