I don't know, you hvae to figure out yourself will it works or not.
probably it will, but I'm not sure will it supported by the kernel or not
and how it will cooperate with a ROM
but this is only one solution, without modding of your tablet
probably it will, but I'm not sure will it supported by the kernel or not
and how it will cooperate with a ROM
but this is only one solution, without modding of your tablet
I haven't had an issue locking on GPS fairly quickly with mine. Are you connected to a Wi-Fi or 3G signal? That certainly helps. Maybe try the app called "GPS Status & Toolbox" to see what's going on with your signalI have mounted a nexus in my dash pics here but my gps singnal is bad because the nexus is so deep in the dash. Do you have any ideas to make the singnal stronger for the nexus. Thanx
Nice installs from you to!
Have you had the back off? I had the same problem and it ended up being the little spring clips that connect the GPS circuit to the antenna embedded in the back cover. I had the back off and it stopped working after that. I took the cover back off and bent the little spring clip contacts up a little and this fixed the problem. Mine is buried deep too but it works perfect now.I have mounted a nexus in my dash pics here but my gps singnal is bad because the nexus is so deep in the dash. Do you have any ideas to make the singnal stronger for the nexus. Thanx
Nice installs from you to!
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
You could take the GPS antenna off the back of the case and mount it where it will get a signal and use shielded cable to reconnect it.
Sent from one of my 47 iPads running android C3P0
Sent from one of my 47 iPads running android C3P0
Yes I had the back off and took it away again and bent the clips but still the navigator shows wrong road
not good to navigate with. I think I have to move the antenna from the backcoverEdit. What cabel should I use between the nexus motherboard and the antenna?
Last edited:
Coaxial cableYes I had the back off and took it away again and bent the clips but still the navigator shows wrong road
Edit. What cabel should I use between the nexus motherboard and the antenna?
Sent from my Nexus 7 using xda app-developers app
Which of the connection pins are for the gps antenna, I cant find in google
If you look at the back and be of the circuits is marked GPS ant line it up with the motherboard and see wilhich pins connect to it. It's the top left i think
Sent from one of my 47 iPads running android C3P0
Sent from one of my 47 iPads running android C3P0
Today I will take the nexus out off the car and try to move the gps. At the same time I would like to change so that if the battery runs out the tablet will auto boot when connected to charger. I have been looking step by step guide but cant find, so could anyone write a step by step guide to change: fastboot oem off-mode-charge 1 to fastboot oem off-mode-charge 0? Im noob in android
Do you run Kangaroo-kernel? Then use PowerEventMgr app to set fast-charge, fixed install mode, firm sleep etc..Today I will take the nexus out off the car and try to move the gps. At the same time I would like to change so that if the battery runs out the tablet will auto boot when connected to charger. I have been looking step by step guide but cant find, so could anyone write a step by step guide to change: fastboot oem off-mode-charge 1 to fastboot oem off-mode-charge 0? Im noob in android
Sent from my Nexus 5 using Tapatalk
Well, if you want it to sleep and wake-up based on power status, and you want to run anything newer than 4.3, you need to run the Kangaroo-kernel. It's called Fixed Install Mode.
Sent from my Nexus 5 using Tapatalk
I have tasker to wake, sleep, airplane mode on/off and wifi on/off
Edit. Do you recommend Kangaroo-kernel and what rom then? works with CM11?
Last edited:
In CM11 settings->Display & Lights -> check: wake on plug
Edit. Then also Settings->Development settings->Stay on when charger connected
Last edited:
You need this: http://www.wugfresh.com/nrt/Today I will take the nexus out off the car and try to move the gps. At the same time I would like to change so that if the battery runs out the tablet will auto boot when connected to charger. I have been looking step by step guide but cant find, so could anyone write a step by step guide to change: fastboot oem off-mode-charge 1 to fastboot oem off-mode-charge 0? Im noob in android
In advanced utilities is a place to run fastboot commands.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
---------- Post added at 09:42 AM ---------- Previous post was at 09:36 AM ----------
Actually, there is a Kangaroo ROM now which is 4.4.2 based on Purity ROM. It has the power event manager, otg charging, etc built into it.
http://forum.xda-developers.com/showthread.php?t=2660803
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
And what about the zeljko one, with NetFluke kernel ? http://forum.xda-developers.com/showthread.php?t=2546065
Seems to have all needed included in the kernel, running CM11. anyone gave it a try ?
It works... but it doesn't have the easycap drivers in it.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Ok, I think I'll try the Kangaroo ROM you mentionned, the one I was talking about is not completly stable (it happens from time to time that the n7 freeze completly, and reboot few seconds after that...)
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone